Reliabilities of distances describing bolt placement for high strength steel connections

Oztekin, Ertekin Techno-Press 2015 Structural Engineering and Mechanics, An Int'l Jou Vol.54 No.1

In the bolted connections, bolt placements are generally described and are generally made in the direction of design effects and in the perpendicular direction to design effects. In these both directions, the reliability of the distance of bolts to the edges of connection plate and the distance of bolts to each other is investigated for high strength steel connections built up with high strength bolts in this study. For this purpose, simple SL (bearing type shear connection) and SLP (bearing type shear connection for body-fit bolts) type steel connections with St 52 grade steel plates with 8 different thicknesses and with 8.8D grade high strength bolts (HV) were constituted and analyzed under H (Dead Loads+Live Loads+Snow Loads+Roof Loads) and HZ (H Loads+Wind Loads+Earthquake Loads) loadings. Geometric properties, material properties and design actions were taken as random variables. Monte Carlo Simulation method was used to compute failure risk and the first order second moment method was used to determine the reliability indexes of those different distances describing the placement of bolts. Results obtained from computations have been presented in graphics and in a Table. Then, they were compared with some values proposed by some structural codes. Finally, new equations were constituted for minimum and maximum values of distances describing bolt placement by regression analyses performed on those results.

Primary study on metal amounts in Lophius piscatorius Linnaeus, 1758 obtained from fish markets in Sinop, Turkey

Bat, Levent,Yardim, Oztekin,Oztekin, Aysah,Sahin, Fatih,Arici, Elif Korea FoodHealth Convergence Association 2020 식품보건융합연구 (KJFHC) Vol.6 No.1

The levels of five heavy metals (mercury, cadmium, lead, copper and zinc) were analyzed in edible tissues of Lophius piscatorius Linnaeus, 1758 marketed in Sinop coasts of the Black Sea by using inductively coupled plasma mass spectrometry. With the present study, heavy metal values of this fish in the Black Sea were examined for the first time. The mean concentrations in mg kg^-1 wet wt. of Hg, Cd, Pb, Cu and Zn were 0.022, 0.009, 0.035, 6.3 and 16 mg kg^-1 wet wt., respectively. The results of the present study indicate that the consumption of muscle from anglerfish can be considered safe in terms of permissible legal limits. It is clear that, Zn showed the high accumulation in muscle tissue followed by Cu, while non-essential metals Hg, Cd and Pb showed the low accumulation. This could be explained by the fact that Zn and Cu are essential elements in the bodies of living organisms and has an important role in different physiological processes. In the present study, heavy metal levels in angler fish were low. Likewise, the calculated HI values were lower than one. In conclusion, the results of the present study indicate that the consumption of muscle from anglerfish can be considered safe in terms of permissible legal limits and hazard index values.

Toxic Elements in Edible Mollusks from Igneada Coasts of the Black Sea, Turkey

Bat, Levent,Sahin, Fatih,Oztekin, Aysah Korea FoodHealth Convergence Association 2018 식품보건융합연구 (KJFHC) Vol.4 No.3

In this present work, the amounts of toxic elements were determined in the soft tissues of mollusks (Mytilus galloprovincialis and Rapana venosa) collected from Igneada shores of the Black Sea where suggested as Marine Protection Area (MPA). M. galloprovincialis accumulated the highest amounts of Cd in winter, while the highest amounts of Cd and Hg were detected in R. venosa in winter and autumn. The concentrations of toxic elements found in the soft tissues of mollusks varied for Cd: 0.07-0.14, Hg: 0.03-0.44 and Pb: 0.09-0.21 mg/g dry wt. The estimated levels of all non-essential metals in the present work were lower than the limits permitted by European Community Regulation (EU) and the Turkish Food Codex (TFC). The estimated weekly intakes (EWI) and daily intakes (EDI) of all the through consumption of these seafood by Turkish people in the Igneada coasts of the Black Sea were quite below the permissible tolerable weekly/daily intakes for 70 kg person (PTWI / PTDI) set by FAO/WHO. As results, it can be concluded that no hazard effects on people health would be raised at present from the consumption of these mollusks' species.

Effect of macro and micro fiber volume on the flexural performance of hybrid fiber reinforced SCC

Turk, Kazim,Kina, Ceren,Oztekin, Erol Techno-Press 2020 Advances in concrete construction Vol.10 No.3

The aim of this study is to investigate the flexural performance of hybrid fiber reinforced self-compacting concrete (HFRSCC) having different ratio of micro and macro steel fiber. A total of five mixtures are prepared. In all mixtures, the sum of the steel fiber content is 1% and also water/binder ratio is kept constant. The amount of high range water reducer admixture (HRWRA) is arranged to satisfy the workability criteria of self-compacting concrete. Four-point bending test is carried out to analyze the flexural performance of the mixtures at 28 and 56 curing days. From the obtained load-deflection curves, the load carrying capacity, deflection and toughness values are investigated according to ASTM C1609, ASTM C1018 and JSCE standards. The mixtures containing higher ratio of macro steel fiber exhibit numerous micro-cracks and, thus, deflection-hardening response is observed. The mixture containing 1% micro steel fiber shows worst performance in the view of all flexural parameters. An improvement is observed in the aspect of toughness and load carrying capacity as the macro steel fiber content increases. The test results based on the standards are also compared taking account of abovementioned standards.

Comparison of electrodialysis and reverse electrodialysis processes in the removal of Cu(II) from dilute solutions

Sureyya Altin,Elif Oztekin,Ahmet Altin 한국화학공학회 2017 Korean Journal of Chemical Engineering Vol.34 No.8

Electrodialysis (ED) and electrodialysis reversal (EDR) processes have been often used for separation of ions in dilute solutions. In this study, the performance of ED and EDR processes has been examined in the removal of copper from the dilute solutions. First, applied voltage, initial concentration, flow rate, type of electrolyte and the effect of concentration were determined for both processes. Then, separation efficiency, current efficiency, energy requirement and material flux of the processes were calculated, and the performances of the processes were compared. The separation efficiency and energy consumption of EDR process were higher compared to ED process under equal operating conditions. Also, the current efficiency (39.58%) of EDR process was lower than the current efficiency (67.46%) of ED process. It can be said that the ED process is more suitable in terms of energy consumption for separation in the low flow rate and concentration.

Are Primary Health Care Workers Aware of Cervical Cancer Risk?

Can, Huseyin,Erdem, Ozgur,Oztekin, Coskun,Celik, Sercan Bulut,Onde, Mete,Celepkolu, Tahsin,Ongel, Kurtulus Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.16

Background: We here examined the awareness of female health employees (doctors, nurses, midwives) working in primary health care service about cervical cancer and its risk factors. Additionally attitude and behavior for gynecologic examination and pap smear screening wwere researched. Materials and Methods: This cross-sectional, descriptive study con cerned female health employees working at primary health care services in two southern cities of Turkey, over a four month period in 2013. Participants were recently or previously sexually active research was explained and verbal informed consent was obtained face to face. The questionnaire consisted of two parts; socio-demographic characteristics and level of knowledge about cervical cancer and its risk factors. Results: The average age of the participants (midwives 43.7%, n=143; nurses 40.4%, n=132; doctors 6.4%, n=21; emergency medical technicians and others, 9.5%, n=31; total, n=327) was $30.9{\pm}6.41$ years. 64.2% (n=210) were working in Diyarbakir and 35.8% (n=117) in Batman. A large proportion reported low knowledge and inadequate screening practice Conclusions: Health employees should be better informed about the importance of screening for cancers, given their preventive roles for the general population.

Effects of Grafting in Saline Conditions

Yuksel Tuzel,Golgen Oztekin,Hakki Tuzel,Ayse Gul 한국원예학회 2006 한국원예학회 기타간행물 Vol.- No.-

Determination of Patient Learning Needs after Thyroidectomy

Temiz, Zeynep,Ozturk, Didem,Ugras, Gulay Altun,Oztekin, Seher Deniz,Sengul, Emel Asian Pacific Journal of Cancer Prevention 2016 Asian Pacific journal of cancer prevention Vol.17 No.3

The purpose of this study was to determine discharge learning needs of patients undergoing thyroidectomy. The population of this descriptive study consisted of patients undergoing thyroidectomy in the Endocrine Surgery Unit of a university hospital between February and December 2013. The study included 251 patients who were discharged after thyroidectomy. Data obtained using the data collection form and the Patient Leaning Needs Scale (PLNS) were analyzed by frequency, mean, standard deviation, Kruskal Wallis and student-t tests. The mean age of the patients was $47.91{\pm}13.05$ and 76.1% were females. The PLNS total mean score was $208.38{\pm}34.91$, with the maximum score of $39.23{\pm}6.80$ on the subscale of treatment and complications and the minimum score of $19.45{\pm}4.70$ on the subscale of feelings related to condition. It was found that the PLNS total score of the patients was not influenced by age, gender, marital status (p>0.05). This study demonstrated that patients had high learning needs after thyroidectomy.