건축공사시방서에서의 KS규격의 국제인증방안에 관한 연구

김경식,이재섭,김용수,이규진,조용훈,최완철,전재열,이현수,구재동,이기환 대한건축학회 2004 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.24 No.1

The purpose of this research is make out construction specifications for International Construction. Using off-shore products incur cost increase and longer delivery term of construction. and inconvenient on International Construction. Expand the range of additional local products conforming to performance. Life Cycle Cost. maintainability. operability. user's acceptability, etc.. And this study is suggest the standard formats and the techniques for construction specification.

서울의 Penicillinase Producing Neisseria gonorrhoeae 발생빈도(1998)

김재홍,김준호,반재용,이정우,황성주,정준규,정성태,강진문,조흔정,홍창의,정혜신,이한승,김이선,이봉길,이종호,선영우,한기덕,윤성필,이성훈,안종성,박석범,문승현,조항래,김형섭,류지호,황재영,박준홍,손상욱 한양대학교 의과대학 2001 한양의대 학술지 Vol.21 No.1

In recent years, gonorrhea has been pandemic and remains one of the most common STDs in the world, especially in developing countries. For the detection of a more effective therapeutic regimen and assessing the prevalence of Penicillinase Producing Neisseria gonorrhoeae(PPNG), we have been trying to study the patients who have visited the Venereal Disease Clinic of Choong-Ku Public Health Center in Seoul since 1980 by menas of the chromogenic cephalosporin method. In 1998, 93 strians of N. genorrhoeae were isolated, among which 60(64.5%) were PPNG. The prevalence of PPNG in Seoul, which had been decreased to 39% in 1996 after a peak of 74.3% in 1993, is increased to 64.5% in 1998.

서울의 Penicillinase Producing Neisseria Gonorrhoeae 발생빈도(1996)

김재홍,황동규,전재홍,김윤석,김중환,김용준,이창균,임동진,김현수,조창근,김경문,박상훈,전우형,김희성,이호정,차명수,김갑형,김형석,김석우,황지환,박병순,권오상,이민수,송기훈,성소영,이인섭,부태성 대한화학요법학회 1999 대한화학요법학회지 Vol.17 No.2

Background : In recent years, gonorrhea has been panedemic and remains one of the most commom STDs in the world, especially in developing countries. Objective & Methods: For the detection of a more effective therapeutic regimen and assessing the prevalence of PPNG, we have been trying to study the patients who have visited the VD Clinic of Choong-Ku Public Health Center in Seoul since 1980 by means of the chromogenic cephalosporin method. Results: In 1996, 139 strains of N. gonorrhoeae were isolated, among which 53(39.0%) were PPNG. Conclusion: Our results suggests that after a peak of 74.3% in 1993, the prevalence of PPNG in Seoul is gradually declining.

광중합형 글래스아이오노머 시멘트의 브라켓 접착후 시간 경과에 따른 전단결합강도의 비교연구

이기수,임호남,박영국,신강섭 대한치과교정학회 1995 대한치과교정학회지 Vol.25 No.5

이 연구는 시간 경과에 따라 폴리아크릴산 용액으로 표면 조건화된 법랑질에 대한 광중합형 글래스아이오노머 시멘트의 브라켓 전단결합강도를 인산용액으로 부식된 법랑질에 대한 치과 교정용 레진 접착제의 그것과 비교하여 브라켓을 접착할 때 상용되어 온 치과교정용 레진 접착제를 광중합형 글래스아이오노며 시멘트로 대체할 수 있는지의 여부를 구명하기 위하여 시행되었다. 발거된 사람 소구치의 법랑질 표면을 각각 10% 폴리아크릴산용액과 38% 인산용액으로 처리한 후, 각각 시판되고 있는 광중합형 글래스아이오노머 시멘트의 일종(Fuji Ⅱ LC)과 화학중합형 치과교정용레진접착제의 일종(Mono-Lok 2)으로 법랑질 표면에 금속브라켓을 접착하고, 시편을 실온에서 5분, 15분 방치한 후, 37℃의 증류수 속에 1일, 35일동안 침지시킨 후, 브라켓 전단결합강도를 측정하고, 접착파절 패턴을 관찰하였다. 브라켓 접착 5분과 15분 후의 광중합형 글래스아이오노머 시멘트의 브라켓 전단결합강도는 치과교정용 레진 접착제의 그것보다 유의성 있게 높았다. 광중합형 글래스아이오노머 시멘트와 치과 교정용 레진 접착제의 브라켓 전단결합 강도는 브라켓 접착 1일 까지 증가하였으나 1일군과 35일군의 그것 사이에 통계적 유의차가 없었다. 이상의 결과는 광중합형 글래스아이오노머 시멘트가 브라켓 접착제로서 임상적인 유의성이 있음을 시사한다. The purpose of this study was to evaluate effects of time on shear bond strengths of a light-cured glass ionomer cement and chemically cured resin cement to enamel, and to observe the failure patterns of bracket bondings. Shear bond strength of a light-cured glass ionomer cement were compared with that of a resin cement. Metal brackets were bonded on the extracted human bicuspids. Specimens were subjected to a shear load(in and Instron machine) after storage at room temperature for 5 and 15 minutes; after storage in distilled water at 37℃ for 1 and 35 days. The deboned specimens were measured in respect of adhesive remnant index. The data were evaluated and tested by ANOVA, Duncan's multiple range test, and t-test, and those results were as follows. 1. The shear bond strength of light-cured glass ionomer cement is higher than that of resin cement at 5 and 15 minutes. 2. The shear bond strength of both light-cured glass ionomer cement and resin cement increase with time. There was no significant difference in those of both 1 day group and 35 day group 3. Light-cured glass ionomer cement is suitable as orthodontic bracket adhesives

자동차용 실리콘 가속도센서의 개발(Ⅱ)

이종현,신장규,이상룡,천희곤,조찬섭,심준환,류인식,박석홍,허정준,박기열 경북대학교 센서기술연구소 1994 연차보고서 Vol.1994 No.-

자동차의 air-bag 장치에 실용될 수 있는 압저항형 단결정 실리콘 가속도센서 칩을 개발하기 위하여 결정 실리콘 미세구조의 제조방법을 확립하고, 단위공정의 검증을 통하여 일괄공정에 의한 PROTO-TYPE 칩을 만드는 기술을 연구하였다. 단결정 실리콘 미세구조는 선택확산법을 이용하여 정확히 선택된 영역에만 air-gap을 형성하여 미세구조의 측면식각을 방지하는 선택확산법에 의한 실리콘 마이크로머시닝 기술로 제조하였다. 일괄공정을 위한 단위공정확립을 위하여 PROTY-TYPE 8빔 브릿지형 가속도 센서를 제조하였다. 제조된 칩의 가속도에 따른 출력전압은 선형성을 나타내고 있으며, 감도는 약 50 ㎶/V·g로 나타났다. 이 감도는 50G용 가속도센서의 사양을 만족하지 못했다. 이는 공정에 의한 문제라기 보다는 가속도센서의 시뮬레이션에 의해 설계한 구조가 이미 원하는 감도에 못 미친다는 것으로 생각된다. 따라서 2차 공정으로 제조될 가속도센서의 파라미터를 SuperSAP 유한요소 패키지를 이용하여 실리콘 미세구조부의 파라미터에 따른 특성을 시뮬레이션하였다. 설계된 50G용 가속도센서의 mass Pad의 반경 및 빔 길이, 빔 폭, 빔 두께, 그리고 mass의 각 파라미터 값은 700 ㎛, 120 ㎛, 5 ㎛, 1.0 ㎎ 이었다. 반도체 공정기술, 관성질량 제조법 및 선택확산을 이용한 마이크로머시닝을 사용하여 일괄공정으로 8빔 브린지형 가속도센서를 제조하였다. We researched the establishment of the silicon microstructure fabrication technique to develop a piezoresistive type silicon acceleration sensor chip and the technique to make a proto-type chip by the verification of the unit-process. Silicon microstructure is fabricated silicon micro-machining by selective diffusion method. This method prevent a side-etching of microstructure because selective diffused region is only formed an air-gap. We fabricated a proto-type 8-beam bridge-type acceleration sensor to establish the unit-process for the batch-process. The output voltage of the chip represented linearity with acceleration, and the sensitivity was about 50 ㎶/V·g. But this sensitivity dosen't satisfy the requirements of a practical acceleration sensor. The cause of this result is assumed not process problem, but the structure designed by simulation isn't suitable already. Threfore, the characteristics of parameters of the acceleration sensor that will be fabricated by 2nd-process is simulated by SuperSAP finite-element package. The determined parameter values of beam length, beam width, beam thickness, mass, and mass radius are 120 ㎛, 5 ㎛, 1.0 ㎎, and 700 ㎛, respectively. We fabricated 8-beam bridge-type acceleration sensor by batch-process using a semiconductor process technique, proof-mass fabrication method, and micromachinig using selective diffusion.

정신분열병에서 보이는 이해폭 과제 수행의 결함

이기원,한양순,강대엽,김형섭 용인정신의학연구소 1998 용인정신의학보 Vol.5 No.1

법랑질의 표면처리가 광중합형 및 화학중합형 글래스아이오노머 시멘트의 전단결합강도에 미치는 영향

신강섭,이기수 대한치과교정학회 1995 대한치과교정학회지 Vol.25 No.2

이 연구는 법랑질의 표면처리가 광중합형 및 화학중합형 글래스아이오노머 시멘트의 브라켓 전단결합강도에 미치는 영향을 구명하고, 글래스아이오노머 시멘트의 브라켓전단결합강도와 치과교정용 레진접착제의 그것과 비교하기 위하여 시행하였다. 발거된 사람소구치의 법랑질표면을 10% 폴리아크릴산용액, 38% 인산용액과 퍼미스로 처리한 후, 광중합형 글래스아이오노머 시멘트의 일종, 화학중합형 글래스아이오노머 시멘트의 일종 및 화학중합형 치과교정용 레진 접착제의 일종으로 법랑질표면에 금속브라켓을 접착하고, 37℃의 증류수속에 24시간 침지시킨후, 브라켓전단결합강도를 측정하고, 접착파정패턴을 관찰하였으며, 표면처리된 법랑질표면을 주사전자현미경으로 관찰하여 다음과 같은 결과와 결론을 얻었다. 1. 표면처리방법에 관계없이 광중합형 글래스아이오노머 시멘트의 브라켓전단결합강도는 화학중합형 글래스아이오노머 시멘트의 그것보다 높았다. 2. 38% 인산용액과 10% 폴리아크릴산용액은 퍼미스보다 글래스아이오노머 시멘트의 브라켓전단결합강도를 높였다. 3. 주사전자현미경 관찰에서 10% 폴리아크릴산용액은 법랑질표면을 미약하게 부식시키고 청결하게 하였으며, 38% 인산용액은 법랑질을 심하게 부식시켰고, 퍼미스를 이용한 세마는 법랑질표면에 불규칙한 흠집을 만들고 청결하지 못한 표면을 만들었다. 4. 10% 폴리아크릴산용액으로 표면조건화된 법랑질에 대한 광중합형 글래스아이오노머 시멘트의 브라켓 전단 결합강도는 38% 인산용액으로 부식된 법랑질에 대한 치과교정용 레진접착제의 그것과 유의차가 없었다. 이상의 결과는 10% 폴리아크릴산용액으로 표면조건화시킨 광중합형 글래스아이오노머 시멘트에 의한 브라켓 접착은 통상적으로 사용되어온 치과교정용 레진접착제에 의한 브라켓 접착을 대체할 수 있음을 시사한다. The purpose of this study was to evaluate the effects of surface conditioning with 10% polyacrylic acid, etching with 38% phosphoric acid, and polishing with a slurry of pumice on shear bond strengths of light-cured glass ionomer cement, chemically cured glass ionomer cement, and a composite resin to enamel, and to observe the failure patterns of bracket bondings. Shear bond strengths of glass ionomer cements were compared with that of a composite resin. Metal brackets were bonded on the extracted human bicuspids after enamel surface treatments, and samples were immersed in the 37℃ distilled water bath, and shear bond strengths of glass ionomer cements and a composite resin were measured on the Instron machine after 24hrs passed, and the deboned samples were measured in respect of adhesive remnant index. Scanning electron micrographs were taken of enamel surfaces after various treatments. The data were evaluated and tested by ANOVA and Duncan's multiple range test, and those results were as follows. 1. Shear bond strength of light-cured glass ionomer cement showed statistically higher than that of chemically cured glass ionomer cement. 2. Shear bond strengths of light-cured and chemically cured glass ionomer cements to enamel treated with 10% polyacrylic acid and 38% phosphoric acid showed statistically higher than those with a slurry of pumice. 3. According to scanning electron micrographs, enamel surface conditioned with 10% polyacrylic acid is slightly etched and cleaned, that etched with 38% phosphoric acid is severely etched, and that polished with a slurry of pumice is irregulary scretched and not completely cleaned. 4. After debonding, light-cured glass ionomer cement to enamel treated with 10% polyacrylic acid showed less residual materials on the enamel surface than composite resin to enamel etched with 38% phosphoric acid. 5. There was no significant difference in the shear bond strength of light-cured glass ionomer cement to enamel treated with 10% polyacrylic acid and that of composite resin to enamel etched with 38% phosphoric acid.

촉각센서를 위한 실리콘 마이크로다이어프램 배열의 제조

박기열,심준환,류인식,조찬섭,이종현 경북대학교 센서기술연구소 1994 센서技術學術大會論文集 Vol.5 No.1

Silicon diaphragm arrays were fabricated by silicon micromachining using porous silicon. Fabricated diaphragms consist of 3x3 array. The thickness of diaphragm is 5μm and theire size are 200x200, 300X300 and 400X400μm^(2), respectively. Several % of resistance change is observed, when stress was applied at diffused resistor on the diaphragm. Microdiaphragm arrays were easily fabricated by silicon micromachining using porous silicon, and we confirmed feasibilty of application at tactile sensor.

광센서를 위한 ZnO:Al 투명도전막의 제조 및 특성연구

박기철,이형기,심호섭 경북대학교 센서기술연구소 1995 연차보고서 Vol.1995 No.-

RF 마그네트론 스퍼터링법으로 AZO(ZnO:Al)막을 증착시켰다. 타겟내의 Al_2O_3의 첨가량, 기판온도, 분위기압, RF출력 등의 증착조건의 변화에 따라 제조된 AZO막의 조성, Al 도핑양, 구조적 특성 등을 XRD, SEM, EDS 및 RBS로 조사하였다. 이와 함께 전기적 및 광학적 특성을 Hall 효과 및 광투과도 특성을 통하여 조사하였다. 증착된 AZO막은 육방정의 wurtzite 구조였으며 모든 증착조건에서 기판에 수직으로 성장하는 (002)면 방향을 가지는 c-축배향성을 나타내었다. 증착된 AZO막내의 AB 도핑량은 타겟내의 무게비에 비례하였으며 Zn : O의 조성비토 1 : 1로 거의 일정하였다. 투명도전막으로서의 최적조건은 3wt%의 Al_2O_3이 첨가된 타겟으로 기판온도가 150℃, 분위기압이 2mTorr, RF출력이 150W로 증착한 경우였으며 이 때 비저항은 4.7×10 exp (4)Ω㎝, 캐리어 농도는 7.5×10 exp (20)㎝^-3이었다. 또 두께가 1500Å인 막의 경우 550㎚에서 광투고도가 90%이상이었으며 광학적 밴드갭은 3.53eV였다. Aluminium doped zinc oxide(AZO)films were prepared by RF magnetron sputtering method. The chemical compositions, doping concentrations, and the structural char-acteristics of the AzO films were studied in accordance with various deposition parameters, such as Al_2O_3 amount, substrate temperature and working pressure, by XRD, EDS, SEM and RBS. And The electrical and optical properties of AZO films were characterized by Hall effect and optical transmittance measurements. AZO films had were hexagonal wurtzite structure and dominent c-axis orientation. The Al doping concentration in the films were monotonically increased. The atomic ration of Zn : O were 1 : 1. The substrate, working pressure and rf power for optimum condition to fabricate the transparet conductive films using a target containing 3wt% Al_2O_3 were 150 ℃, 2mTorr and 150W, respectively. The resistivity and the carrier density of the AZO film prepared under this condition were 4.7 × 10 exp (-4) Ω㎝ and 7.5 × 10 exp (20) ㎝^-3, respectively. The optical transmittance of 1500 Å thick films at 550㎚ is ∼90% and optical energy band gap was 3.53eV.

흰쥐에서 음경발기 평가의 척도로서 음경해면체내압측정술 확립

송윤섭,김용준,이광우,김준모,문기혁,박영호,민영기,유형균,김형건 순천향의학연구소 2001 Journal of Soonchunhyang Medical Science Vol.7 No.1

Purpose: Because studies about the control of penile erection at the entral nervous system was dependent on the animal experiments, establishment of measuring penile erection is important to evaluate the effects changes at the central nervous system on the penile erection. Intracavernous pressure measurement in rats has been introduced as a suitable index for the evaluation of penile erection but this method is invasive and technically difficult. So, we established the intracavernous pressure measurement in rats as the experimental index for penile erection. Materials and Methods: 42 male adult Sprague-Dawley rats (250-300gm) were divided to saline or papaverine treated group. Rats were placed on a heating table to maintain their body temparature and anesthetized with 50mg/kg of pentobarbital sodium by intraperitoneal injection. A cannula was inserted to the left carotid artery to measure systemic blood pressure. Saline (0.05, 0.1ml), papaverine(0.05, 0.1, 0.25, 0.5, 1.0, 2.0mg) were injected intracavernously via 26 guage needle filled with saline or papaverine which connected to pressure transducer and polygraph was inserted into the corpus cavernosum on one side to inject the drug and to measure intracavernous presure. Results: Properly executed insertion and intracavernous administration produced a instantaneous but transient rise in intracavernous pressure that substantially stabilized and maintained at 5.4±0.4mmHg. Intracavernous pressure and duration of penile blood flow following intracavernous injection of papaverine are increased comared to those of saline. Conclusions: Monitoring intracavernous pressure in rats represents a suitable index for the evaluation of penile erection in small laboratory animals.