http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김선택(Sun Teak KIM),최기인(Ki In CHOI),이재인(Jae In LEE),임다혜(Da Hye LIM),최철호(Zel Ho CHOI),구상만(Sang Man KOO) 한국생태공학회 2014 한국생태공학회지 Vol.4 No.1
PVC is one of the common thermoplastic polymers well mixed up with other plasticizer, stabilizer, and additive agent. It is also a highly energy efficient material widely used in many industries related with vehicles, accessories, furniture, packaging, pipes, wallpaper, wire coating, and so on. Since it has been reported that VCM, the raw material of PVC, could be related with high of bio-carcinogenicity in human, however, the level of residual VCM not only in the polymer resins but also in the environment have been regulated in many countries. There are several testing methods for the determination of residual VCM in the polymer resins as well as environment samples, including those by ISO, ASTM, EPA, KS, and other governmental guidelines. However, it is still difficult to measure residual VCM because of its high vapor pressure. No suitable commercial reference material for VCM is another problem. To establish and develop more reliable test method for residual VCM, this paper introduces several typical standard methods for residual VCM testing in Korea and other countries.
가변피치프로펠러의 칼라형과 트러니언형 허브의 비교 연구
김기인(Ki-In Kim),송기주(Ki-Ju Song),전동춘(Dong-Chun Jeon),강선이(Sun-Yi Kang),김정렬(Jeong-Ryul Kim),차지협(Ji-Hyoub Cha) 한국마린엔지니어링학회 2009 한국마린엔지니어링학회 학술대회 논문집 Vol.2009 No.-
There are two kinds of hub mechanism on the controllable pitch propeller. One is the collar type and the other is the trunnion type. Pitch variation mechanism of the collar type of CPP is a simpler and cheaper solution, therefore CPP of this type is more applicable for commercial vessels. But the trunnion type of CPP has many advantages compared to the collar type of CPP : There are an ability to install up to 7 blades and a smaller dependency from bolt properties. The blades arrangement of trunnion type does not need bolts and it has a smaller disk factors for the same number of blades compared with the collar type CPP. In this instance, the CPP of trunnion type is an appropriate fit for the naval purposes(explosive shock) and ice breakers.
소형 정찰 UAV를 위한 고분자 전해질막 연료전지의 경량의 금속 분리판
김기인(Ki-In Kim),이종광(Jong-Kwang Lee),장보선(Bo-Sun Jang),권세진(Se-Jin Kwon) 한국항공우주학회 2010 韓國航空宇宙學會誌 Vol.38 No.10
이 논문에서는 소형 정찰 UAV의 동력원으로 연료전지 시스템을 적용하기 위해, 기존의 흑연 분리판을 대체할 수 있는 가벼운 알루미늄 분리판을 제시하였다. 분리판은 연료 전지 시스템 전체 무게의 80% 이상을 점유하므로, 경량의 알루미늄 분리판은 연료천지 UAV의 유효 탑재량과 항속 시간을 증가시킬 수 있다. 일반적으로 사용되고 있는 흑연 재질의 분리판과 성능을 비교 및 평가하기 위해 알루미늄과 흑연 분리판을 제작하였으며, 알루미늄 분리판의 성능이 흑연 분리판에 비해 약 15% 이상 증가하였음을 확인하였다. 또한, 실제 소형 정찰 UAV 에 적용하기 위한 기초 연구로써 알루미늄 분리판을 이용한 단천지의 성능을 다양한 운전조건에서 측정하였다. This paper proposed lightweight alumllum bipolar plates as an alternative for conventional graphite bipolar plates in fuel cell systems used as a power source for small reconnaissance UAVs. Since bipolar plates occupy more than 80% of the total weight of the fuel cell system, lightweight alumllum bipolar plates can improve the overall payload and flight time of the fuel cell UAV. The aluminum and graphite bipolar plates were fabricated to compare the performance of each of them. A 15% higher performance per weight was obtained from aluminum bipolar plates than the graphite bipolar plates. Also, the performance of a single cell using aluminum bipolar plates was evaluated under various operating conditions.
열처리 후 플럭스 사파이어와 천연 사파이어의 비교 분석
김기인,안용길,서진교,박종완,Kim, Ki-In,Ahn, Yong-Kil,Seo, Jin-Gyo,Park, Jong-Wan 한국결정성장학회 2009 한국결정성장학회지 Vol.19 No.3
산업용 뿐만 아니라 보석용으로 가치가 있는 사파이어는 매우 다양한 방법으로 합성 사파이어를 만들어 왔다. 그 중 천연 사파이어와 매우 유사하며 보석용으로 가치가 높은 Chatham사의 플럭스 사파이어를 사용하여 천연 사파이어와 비교하였다. 먼저 WD-XRF(Wavelength dispersive x-ray fluorescence spectrometer)를 사용하여 천연과 합성의 화학 조성을 비교하였다. 천연 사파이어는 화학 조성이 매우 다양하였으나 플럭스 사파이어는 천연과 유사한 화학 성분과 특히 Mo, Pt, Pb 미량원소가 검출되었다. Pt는 플럭스 사파이어라는 결정적인 증거가 된다. 다음으로 $1300^{\circ}C$와 $1500^{\circ}C$의 고온에서 열처리를 한 후 자외선-가시광선 분광광도계(UV-VIS Spectrophotometer)를 사용하여 분광학적 특성을 조사함으로써 천연 사파이어는 $Cr^{3+}$와 관련된 약 690nm의 형광과 관련된 흡수 피크의 변화를 관찰할 수 있었고 플럭스 사파이어는 $Cr^{3+}$와 관련된 약 690nm의 피크와 376nm, 388nm의 $Fe^{3+}$의 흡수 피크가 변화함을 볼 수 있었다. 고온 열처리에 의해 플럭스 사파이어의 흡수 피크의 변화가 천연 사파이어의 흡수 피크의 변화보다 더 큰 것을 알 수 있었다 화학조성 및 분광분석 실험을 통하여 천연 사파이어와 flux 합성 사파이어의 특성을 비교 분석하였다. Various fabrication methods have been used to synthesize sapphire which has qualities of jewelry well beyond the industrial class. Among them, the flux sapphire of Chatham Company which has as high value as jewelry was selected in order to compare natural and synthetic sapphire. First, the WD-XRF (Wavelength dispersive x-ray fluorescence spectrometer) was used to analyze the chemical composition of natural and synthetic sapphire. Although natural sapphire had very diverse chemical compositions, flux sapphire had small quantities of Mo, Pt and Pb elements in addition to the similar chemical ingredients to natural one. Pt is decisive proof of flux sapphire. Next, by investigating spectroscopic characteristics using UV-VIS Spectrophotometer after heat treatment at high temperatures of $1300^{\circ}C$ and $1500^{\circ}C$, the variation of 690 nm absorbance related to $Cr^{3+}$ was detected in the natural sapphire while those of the 690 nm absorbance (related to $Cr^{3+}$) as well as absorbance of 376 nm and 388 nm ($Fe^{3+}$) were seen in the flux sapphire. It was found that the difference in the absorbance variation of flux sapphire is greater than that of natural sapphire after heat treatment. The chemical composition and spectrum analysis were utilized to compare the natural sapphire and the flux synthetic sapphire.