http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유준혁 대구대학교 정보통신연구소 2012 情報通信硏究 Vol.9 No.1
본 논문은 무선 네트워크 제어 시스템(Wireless Networked Control System)의 최신 연구동향을 제시한다. 일반적으로 유선 네트워크 제어 시스템(Networked Control System)에서 극복하지 못한 다양한 문제점들을 간단하게 해결할 수 있어, 무선 네트워크 기반의 제어 시스템을 선호하는 추세이며 이러한 많은 장점들이 있지만 개선해야할 문제점도 많다. 본 논문에서는 보완해야 할 다양한 문제점을 극복하기 위해 관련된 연구가 이루어지고 있는 동향을 제시한다.
지혁준,최병재,이제호 대한소아치과학회 2001 大韓小兒齒科學會誌 Vol.28 No.1
치아만곡은 조직-형태분화기에 나타나는 치아형태의 이상으로 석회화된 부위와 미석회화된 부위간의 장애로 인해서 치관 및 치근 모두에서 발생하는 기형이며, 상악 절치에서 호발하며 매복 가능성이 높다고 보고되었다. 만곡의 원인으로는 유치의 외상, 치배의 이소성 발육, 낭종이 있으며 그외에 otodental syndrome, 쇄골두개이골증에서 보고되었다. 본 증례는 치아우식증으로 인해서 발생된 치근단병소가 치아만곡을 유발할 수 있는 원인이 될 수 있다고 생각하였기에 이에 보고하는 바이다. Dilaceration is a tooth abnormaly occuring in the histo-morphodifferention stage resulting from disturbance between the uncalcified and already calcified portion that affects both the crown and root. The involved tooth is usually the maxillary central incisor and it also shows high prevalence of impaction. The cause of dilaceration can be either from the trauma of the primary tooth, ectopic development of the tooth germ or from cysts. And it is also found in some cases of Otodental syndrome, Hurler syndrome, Cleidocranial dysostosis. The purpose of this study is to show that periapical lesions caused by dental caries can be another factor in causing dilacerations.
PEG 분해균주의 분리와 PEG film의 상용성에 관한 연구
이제혁,정성제,이준열,전억한 경희대학교 부설 식량자원개발연구소 1993 硏究論文集 Vol.14 No.-
PEG를 sole carbon과 energy source로서 이용하는 미생물을 자연계에서 분리하였고, PEG의 분자량이 높아질수록 그 분해 미생물의 수가 감소하는 것을 확인하였다. 또한, liquid culture로서 PEG농도를 감소시키는 미생물을 선별하였고, 분해율은 PEG 8000이 약 18.8%였으며 PEG 10000은 약 25.4%인 것으로 조사되었다. PEG film의 제조를 위해 EMAA 및 EAA와의 상용성을 적외선 분광(IR) 스펙트럼을 사용하여 조사한 결과, EMAA와 EAA의 카르보닐기와 PEG의 에테르기와의 강한 수소결합이 형성으로 blend film제조시 상용성이 있는 것으로 확인되었다. Several strains capable of degrading PEGs(Polyethylene Glycols)were isolated and investigated for their biodgradation ability of PEGs. Microorganisms screened for the biodegradation studies were those grown on the PEG used as a sole carbon and energy source. It was known that the number of microorganisms decreased when grown on the high molecular weight of PEG(e.g. 20,000). A liquid culture was carried out with such microorgaisms and resulted in the decrease in PEG concentration meaning that PEG was degraded in the reactor. The biodegradability was found to be about 18.8% for PEG-8000 and 25.4% for PEG-10000, respectively. For the manufacture of biodegradable PEG film, EMAA/PEG and EAA/PEG blending ability was investigated with IR spectrum and showed that it was possible to produce blending film.
최혁준,김민 한국공업화학회 2005 응용화학 Vol.9 No.1
Chelating forming groups were introduced into the polymer chains grafted onto a porous hollow-fiber membrane for Sb ion remove in waters by radiation-induced graft polymerization and subsequent functionalization of a monomer containing an epoxy group. Moreover adsorption characteristic and different pH of Sb ion by n-MG membrane were researched. The breakthrough curves overlapped independent of the permeation pressure, residence time. This indicates a negligible diffusional nass-transfer resistance of Sb ion to the chelating forming groups. Moreover the adsorption capacity of each n-MG membrane appeared the highest around pH 7.
Bainite 球狀黑鉛鑄鐵의 磨滅特性에 미치는 殘留Mg의 影響
權赫茂,朴相俊,金水泳 충남대학교 공업교육연구소 1982 論文集 Vol.5 No.2
Bainite spheroidal graphite cast iron specimens of 0∼0.054wt % residual Mg were casted into a green sand mold, 25 mm thickness Y-block. The microstuctures of the castings were studied for mechanical properties and abrasion characteristics. The results obtained from this study are summerized as follows: 1) Under the present expermental conditions, the relation between the abrasion speed and the abraded amount are; 0.5m/sec for 1^st abrasive wear and 2.38m/sec for 2^nd abrasive wear. 2) Increasing the residual Mg, the first abrasion speed for 2nd abrasive wear moved to the low abrasion speed. 3) The maximum amount of abraded material during 2^nd abrasive wear decreases with the increasing residual Mg content, and moves to the high abrasion speed as the residual Mg is increased over 0.042 wt %. 4) The amount of abraded materials increases with the decreasing residual Mg at abrasion speed 2.38 m/sec and with the increasing residual Mg at abrasion speed 0.62∼1.14 m/sec. 5) Increasing the abrasion speed, abrasion mechanisms are as follows; ⓐ 1^st abrasive wear ⓑ 1^st corrosive wear ⓒ 2^nd abrasive wear ⓓ 2^nd corrosive wear. But, Under the present expermental condition the adhesive wear mechanism didn't appear.
광조형 시스템의 정밀조형을 위한 지지대 자동 생성 시스템 개발
강혁준,이형국,김효찬 동의공업대학 2000 論文集 Vol.26 No.1
Support structures are used to support a component during building process and must be removed once the building is complete. For precise building this paper specified types of support structures by means of geometry characteristics. They are point, line and area. And found a new algorithm for detecting geometries which need support structures. For easy of removing support structure teeth profile generation and interferences avoidance algorithm was studied.
국내 살모넬라 분리주에서 spvR 유전자 분포와 단일 뉴클레오티드 다형 연구
권혁준,박경윤,박주연,박용호,김선중,유한상 대한감염학회 2004 감염과 화학요법 Vol.36 No.6
목적 : 지금까지 병원성 살모넬라를 확인하기 위해 분자량이 큰 플라스미드의 존재 유무를 확인하여 왔으나 살모넬라 혈청형 및 검출 방법에 따라 양성율에 큰 차이를 보이고 있고, 일부 병원성 살모넬라 분리주에서 병원성 플라스미드가 관찰되지 않아 spv 유전자들의 유무에 대한 아른 확인방법이 필요하다. 본 실험은 국내 동물 유래 주요 살모넬라 혈청형에서 spvR 유전자의 분포를 알아보고, 병원성 살모넬라 분자진단을 위한 분자표지로써의 가치를 평가하기 위해 실행하였다. 재료 및 방법 : 국내 가축 유래 S. lyphimurium (ST, 26주), S. enteritidis (SE, 10주), S. pullorum (SP, 40주), S. gallinarum (SG, 53주)에 대해 GenBank에 등록된 ST, SE, SP의 spvR 유전자를 비교하여 ST와 SE 간에 차이를 보이는 single nucleotide polymorphism (SNP, 625번 뉴클레오티드)을 포함하도록 시발자를 합성하여 집락-PCR을 수행하였다. 증폭 산물(194bp)은 자동 염기서열장치를 이용하여 염기서열을 결정하였고, 제한효소인 MseI을 사용하여 PCR-RFLP를 실시하였다. 결과 : 집락-중합효소연쇄반응 결과 SP, SG, SE의 모든 (100%) 분리주에서 특이 증폭산물이 검출되었으나 ST의 경우 19주(73%)에서만 증폭되었다. 특히 병원성 관련 플라스미드가 관찰되지 않았던 SP 4주에서 특이적인 증폭산물이 검출되었다. 염기서열 분석결과 SE, SG, SP는 625번 뉴클레오티드에 아데닌을, ST는 구아닌을 가지고 있어 PCR-RFLP를 이용하여 쉽게 구분할 수 있었다. 결 론 : spvR에 대한 집락-중합효소연쇄 반응법은 병원성 플라스미드 검출법보다 SE, SP, SG 병원성 주를 신속하게 검출하는데 유용하고, 625번 뉴클레오티드의 SNP는 ST와 SE, SG, SP를 구분하는 분자표지로 사용될 수 있을 것으로 기대되며, ST에 비해 SE는 진화적으로 SG와 SP에 가까운 것으로 생각되었다. Background : The Salmonella virulence plasmid (spv) genes (spvR, A, B, C and D) on the large virulence plasmids of pathogenic Salmonella serotypes can replace the virulence of the whole plasmid. Recently, virulence plasmid-negative pathogenic Salmonella isolates were isolated. However, positive rates of spv genes among Korean Salmonella serotypes have been obscure. spv genes are conserved in compared to other virulence genes but there are single nucleotide polymorphisms (SNPs) conserved in only certain serotype. Such SNPs are useful for differentiation and understanding evolution of certain serotypes. Materials and Methods : Salmonella serotypes isolated from live stocks [Salmonella typhimurium (ST, 26), S. enteritidis (SE, 10), S. gallinarum (SG, 40) and S. pullorum (SP, 53)] were used for colony-PCR. A primer set covering single nucleotide polymorphism (SNP) at 625th nucleotide of spvR was designed. The nucleotide sequences of amplicons were determined by cyclic sequencing method and RFLP was performed by using MseI. Results : All isolates of SE, SG and SP, including four plasmid-negative isolates, showed specific amplicons but not all of ST (19/26, 73%) were positive to spvR. Based on the nucleotide sequence of 625th nucleotide and PCR-RFLP, SE, SG and SP [A(625)] and ST [G(625)] could be differentiated. Conclusion : spvR can be used as a molecular marker to detect virulent SE, SG, SP and the SNP may be useful for differentiation of SE, SG, SP and ST. According to the SNP study SE may be evolutionarily closer to SG and SP than ST.
농산물 소독과정에서 브롬화메틸에 노출된 근로자에게 발생한 신경병 2례
박태혁,김정일,손지언,김종국,김형수,정갑열,김준연 大韓産業醫學會 2000 대한직업환경의학회지 Vol.12 No.4
목적 : 농산물 소독과정에서 브롬화메틸에 노출된 근로자에게 발생한 신경병 2례 보고. 방법 : 피로감, 전신무력감, 어지럼증, 보행장애 등의 증상을 주소로 내원한 브롬화메틸을 사용하여 방역작업에 종사하는 건강한 20세와 18세의 근로자를 대상으로 혈액검사, 신경정도 및 근전도검사, 뇌자기공명영상 등의 임상검사와 작업력조사를 시행하였다. 결과 : 1례에서 뇌자기공명영상에서 연수와 소뇌의 양측 측충부의 고신호강도가 관찰되었고 11일 후의 추적조사에서 동일 부위의 고신호강토가 감소된 소견이 관찰되었으며 뇌병증으로 최종 진단되었다. 다른 1례는 신경전도검사에서 다발성 신경병 소견과 뇌유발전위검사에서 우측 하부 뇌간부위 병소가 관찰되었고 뇌병증 및 말초신경 병으로 최종 진단되었다. 결론 : 근로자들의 증상은 소독과정에서 브롬화메틸 노출로 인한 신경 병으로 판단되며 훈증소독과방역작업에 종사하는 근로자들의 실태조사와 안전에 대한 대책이 시급하다고 하겠다. Objectives : To report two cases of neuropathy due to methyl bromide intoxication. Methods : Workers, engaged in the fumigating process, complained fatigue, general weakness, ataxia, and hypersomnia. We evaluated them with blood tests, neurophysiologic studies and MRI and investigated their occupational history. Results : Increased signal intensities were found in the medulla oblongata and paraver mian of cerebellum in MRI and after 11 days, high signal intensities were reduced in the following MRI. In the other case, polyneuropathy and rlght lower brainstem lesion were observed In the NCV and BAEP studies. Conclusions : We confirmed that worker's symptoms were related to methyl bromide exposure in the fumigation. It is necessary that we should evaluate present condition of fumigating process and prepare appropriate methods to protect workers engaged in the fumigation.
전자상거래에서 고객의 신뢰와 구매력의 관계에 대한 연구
차준섭,장재혁 호남대학교 2002 호남대학교 학술논문집 Vol.23 No.2
B2C(Business to Customer) is one of the electronic commercial transaction. Recently, Internet Shopping mall that is the typical type of it has been on the sharp rise But of all the internet users, those who purchases actually online is few. With typical business, both parties(buyer and seller) came face to face so that they can check the quality of product and pay it to get directly. For e-commerce, however, these things are done in the virtual area of Internet. Therefore it is not possible for customers trust anything about online shopping as others easily, and it causes buying online not to be facilitated inevitably. For example, trying to buy online, customers worry about if the quality of products displayed in the internet mall is acceptable, delivery is to be done correctly and someone can steal our credit card number provided for paying Ironically while buying online increases steadily, reliability for shopping mall is no improved much better. As a result, to facilitate business to customer(B2C), it is required to analyze the factors to make online shopping reliable and the factors that are chief in improving reliability. This document reviews the major factors in trust, and relationship between customers trust and purchasing power, based on the recognition that reliability in business to customer(B2C) is important. With doing research in existing studies and classifying them, theoretic model is provided. For verification and discussion about this model, surveys targets 20∼30 years ole men and women have been made. First, the reputation of Internet Shopping mall do not influence customer trust. Second, two factors of safetyness and trust in e-channel do not influence customer trust, significantly. This point is shown that individual propensity than environmental influence is more important. Third, trust was found o have a strong positive effect on power of purchase. Implications of the findings are discussed for researchers and practitioners.
정순준,허익,박준봉,이만섭,권영혁 慶熙大學校 齒科大學 1995 慶熙齒大論文集 Vol.17 No.2
This study was performed to estimate the effects of cultured bone cell inoculated on porous type hydroxyaptite for the regeneration of the artificial alveolar bone defect. In this experiment 3 beagle dogs were used, and each of them were divided into right and left mandible. Every surgical intervention were performed under the general anesthesia by using with intravenous injection of Pentobarbital sodium (30mg/Kg). To reduce the gingival bleeding during surgery, operative site was injected with Lidocaine hydrochloride (1:80,000 Epinephrine) as local anesthesia. After surgery experimental animal were feeded with soft diet(Mighty dog, Frisies Co., U.S.A.) for 1 weeks to avoid irritaion to soft tissue by food. 2 months before surgery both side of mandibular 1st premolar were extracted and bone chips from mandibular body were obtained from all animals. Bone cells were cultured from bone chips obtained from mandible with Dulbecco's Modified Essential Medium contained with 10% Fetal Bovine Serum under the conventional conditions. Porous type hydroxyapatite were immerse into the high concentrated cell suspension solution, and put 4 hours for attachment the cells on the surface of hydroxyapatite. Graft material were inserted on the artificial bone defect after 3 days of culture. Before insertion of cell-inoculated graft material, scanning electronic microscopic observation were performed to confirm the attachment and spreading of cell on the hydroxyapatite surface. 3 artificial bone defects were made with bone trephine drill on Abe both side of mandible of the experimental animal. First defect was designed without insertion of graft material as negative control, second was filled with porous replaniineform hydroxyapatite inoculated with cultured bone marrow cells as expermiental site, and third was filled with graft materials only as positive control. The size of every artificial bone defect was 3 mm in diameter and 3 mm in depth. After the every surgical intervention of animals, oral hygiene program were performed with 0.1% chlorhexidine digluconate. All of the animals were sacrificed at 2, 4, 6 weeks after surgery. For obtaining histological section, tissus were fixed in 2.5% Glutaldehyde and decalcified with Planko-Rycho Solution for 72 hr. Tissue embeding was performed in paraffin and cut parallel to the surface of mandibular body. Section in Bum thickness of tissue was done and stained with Hematoxylin-Eosin. All the specimens were observed under the light microscopy. The following results were obtained. 1. In the case of control site which has no graft material, less inflammatory cell infiltration and rapid new bone forming tendency were revealed compared with experimental groups. But bone surface were observed depression pattern on defect area because of soft tissue invasion into the artificial bone defect during the experimental period. 2. In the porous hydroxyapatite only group, inflammatory cell infiltration was prominet and dense connective tissue were encapsulated around grafted materials. osteoblastic activity in the early stage after surgery was low to compared with grafted with bone cells. 3. In the case of porous hydroxyapatite inoculated with bone cell, less inflammatory cell infiltration and rapid new bone formation activity was revealed than hydroxyapatite only group. Active new bone formation were observed in the early stage of control group. 4. The origin of new bone forming was revealed not from the center of, defected area but from the surface of preexisting bony wall on every specimen. 5. In this experiment, osteoclastic cell was not found around grafted materials, and fibrovascular invasion into regions with no noticeable foreign body reaction. Conclusively, the cultured bone cell inoculated onto the porous hydroxyapatite may have an important role of regeneration of artificial bone defects of alveolar bone.