부산·경남 지역의 절취사면 보강 사례 연구

장정욱,박춘식,김종환 國立 昌原大學校 産業技術硏究所 2002 産技硏論文集 Vol.16 No.-

This study examined cut slope reinforcement cases in the Pusan-Kyoungnam district, which includes 3 Pusan, 2 East Kyoungnam, 6 Middle Kyoungnam and 3 West Kyoungnam cases. It also analyzed the causes of the collapse and hazards, and the reinforcement method that had been used. The conclusions of the study are presented in the following. (1) The major causes of collapse and hazards in the cut slope are in the following. (ⅰ) The rise of ground water due to a local downpour and the ground seepage of water. (ⅱ) Existence of a soft ground layer. (ⅲ) A decision of slope inclination by an empirical method. (2) It turned out that the main reinforcement methods used for each cut slope were the remethod of gentle slope inclination and the retaining wall method. The auxiliary methods were drainage method for the prevention of water seepage and protection method of surface for the prevention of surface erosion. These methods were applied to almost all the slopes.

GPON MAC 프로토콜의 BR-DBA 알고리즘 설계

장종욱,박성한 동의대학교 산업기술개발연구소 2007 産業技術硏究誌 Vol.21 No.-

6차와 개편된 7차 교육과정 중학교 과학 교과서 생물영역에 대한 비교 분석

장은영,조현욱,김종홍 順天大學校 師範大學 附屬 科學敎育硏究所 2002 科學과 敎育 Vol.10 No.-

The purpose of this study is to compare and analyze the biology area of the 6th and the revised 7th curriculum in the middle school The 6th curriculum emphasized the research activities. It also gave emphasis on the biological materials in our surroundings, field studies, open questions and various applications and the participation in scientific events, while the new curriculum points on the ability to group either between classes or within classes. In―depth and supplementary differentiated curriculum in the 7th curriculum makes "level―based differentiated curriculum" possible and stresses the synthetic research activities, which deal with fundamental notions and the research processes. Looking into the degree of emphasis for each scientific area, the new textbooks have 12 chapters, but the old textbooks have 4 chapters. The allotment of each scientific area is almost same in the new textbooks, through matter (22.7%) takes up less pages than other areas. In the old textbooks, the number of pages allotted for biological subjects is 28.4% and takes up more pages than other areas. The content dealing with biological area comprises 67.5 pages of the new textbooks and 77 pages of the old textbook. The items analyzing constituents for the research activities appear in the new textbooks. These constituents are planning observing and assuming, investigating, reading and building ideas. The common experiments in both textbooks are 22 in the new textbooks, and 11 in the old textbooks.

중합시간과 중합방법에 따른 자가중합형 상교정용 레진의 중합률의 비교에 관한 연구

장기택,김종철,유종욱 大韓小兒齒科學會 1999 大韓小兒齒科學會誌 Vol.26 No.2

가찰성 상교정 장치에 많이 사용되는 자가중합형 상교정용 레진의 미반응 단량체는 레진의 물성과 생물학적인 면에 많은 영향을 끼친다. 다라서 미반은 단량체를 최소화하고 중합률을 최대로 하는 중합방법에 대한 연구는 중요한 의의를 갖는다. 저자는 자가중합형 상교정용 레진의 중합시간과 중합방법에 따른 중합률을 비교해보기 위해 시편을 다음과 같이 5군으로 나누어 연구를 진행하였다. 상교정용 레진의 분말과 용액을 혼합하여 제 1군은 28℃의 공기중에 보관하였고, 제 2군은 28℃의 물에, 제 3군은 28℃의 물과 30psi의 압력에, 제 4군은 43℃의 물에, 제 5군은 43℃의 물과 30psi 의 압력하에 각각 보관하였고, 10분, 1시간, 12시간, 1일, 3일 경과 후에 각 시편을 Fourier 변환적외선분광법을 이용하여 중합률을 측정하여 다음과 같은 결론을 얻었다. 1. 모든 군에서 중합시간이 경과함에 따라 중합률도 지속적으로 증가하는 양상을 보였다. 10분경과 후의 결과와 비교하여 볼 때, 제 1군은 12시간 경과 후부터 중합률의 증가가 유의성이 있었고, 제 2군과 3군, 4군, 5군은 1시간 경과 후부터 유의성이 있었다.(p<0.05) 2. 10분과 1일, 3일 경과 후에는 제 5군, 제 4군, 제 3군, 제 2군, 제 1군의 순서대로 중합률이 높았다. 3. 중합시 온도에 따른 비교에서, 1일 경과 후를 제외하고는 모든 시간에서 43℃에서 중합시킨 군의 중합률이 28℃에서 중합시킨 군의 중합률보다 유의성 있게 높았다.(p<0.05) 4. 압력은 12시간 경과 후를(p<0.05) 제외하고는 중합률에 영향을 주지 못했다. 5. 보관방법은 1시간 경과 후를(p<0.05) 제외하고는 중합률에 영향을 주지 못했다. Autopolymerized resin facilitates a more rapid and easier means for the construction of removable orthodonic appliances than heat cured resin. But many reports reveal that more unreacted monomer is found in autopolymerized resin. It is very important to achieve maximum degree of polymerization because if polymerization is inadequate, high level of unreacted monomer has been shown to adversely affect mechanical and physical properties, and also the question of allergy or toxicity to methylmethacrylate must be considered. The purpose of this study was to compare the degree of polymerization according to curing method and curing time. Five groups were desinged ; Group 1 was polymerizied at room temperature(28℃) ; Group 2 in 28℃ water ; Group 3 in 28℃ water under 30psi pressure ; Group 4 in 43℃ water ; Group 5 in 43℃ water under 30psi pressure for 10 minutes. 1 hour, 12 hour, 1 day and 3 day. The degree of polymerization was meaured by means of Fourier Transform Infrared spectroscopy. The results were as follows : 1. The degree of polymerization increased constantly in accordance with curing time in all groups and after curing for 10 minutes. Group 1 showed significantly higher degree of polymerization after 12 hours and Group 2, Group 3, Group 4, Group 5 after 1 hour (p<0.05). 2. The degree of polymerization decreased in the order of Group 5, Group 4, Group 3, Group 2, Group 1 except when the curing time was 1 hour and 12 hours(p<0.05). 3. The degree of polymerization Group 4, Group 5 cured at 43℃ showed significantly higher degree of polymerization than Group 2, Group 3 at 28℃ except when the curting time was 1 day(p<0.05) 4. Among Group 2, Group 3 and Group 4, Group 5, the pressure had no effect on polymerization except when the curing time was 12 hours(p<0.05) 5. Between Group 1 and Group 2, the method of storage had no effect on polymerization except when the curing time was 1 hour(p<0.05)

화상창상의 치유 및 반흔형성 과정에서 신경펩티드의 변화

장영철,범진식,이종욱,오석준 대한화상학회 2003 대한화상학회지 Vol.6 No.2

화상창상의 치유 및 반혼형성 과정에서 신경펩티드의 변화

장영철,범진식,이종욱,오석준 대한화상학회 2003 대한화상학회지 Vol.6 No.2

MH를 이용한 이종망간 초기설정시간 축소에 관한 연구

장종욱;김기용 東義大學校産業技術開發硏究所 2008 産業技術硏究誌 Vol.22 No.-

Mobile IP provides hand-held devices with mobility which allows the user to do work over the network. However, handover time due transfer between access routers causes network delays and data loss. L2Trigger Handover expects this handover to take place, and executes L3 handover before L2 handover takes place, thereby reducing overall handover latency, although it still is an issue since handover latency between AR is not completely eliminated in L2 trigger handover. In this paper took into consideration where MIH is used in MIPv4 and using MIH Table when handover is about to occur in MN(Mobile Node), thereby pre-fetching data needed by Handover. In this way, when the handover is estimated, it improves the init lime that L2trigger had. Furthermore we can find that we can execute the handover with shorten init time in smaller and narrow overlap length

심인성 색전 요인이 없는 뇌경색 환자에서 경식도 심초음파와 Acoustic Quantification을 이용한 대동맥 탄성의 평가

이종민,윤호중,임효영,박지원,김휘열,전희경,문건웅,정욱성,채장성,김재형,최규보,홍순조 대한순환기학회 2000 Korean Circulation Journal Vol.30 No.8

축구포지션별 무산소 운동능력 분석

손장식,정정욱,김종호,임정수,김훈 대구대학교 기초과학연구소 2003 基礎科學硏究 Vol.19 No.3

In this study, the Wingate power test was performed to investigate of the anaerobic power output in soccer players who play in different position. The main purpose of the test was to provide the enhancement of anaerobic capacity which was conducted by comparing and analysing of the Wingate test. This will improve the performance during the soccer games. Seventeen soccer players with three different positions, FW, MF, DF, were recruited, and undertook the Wingate power test, and anaerobic power, peak power output, anaerobic capacity, and fatigue index was analysed. There was a significant effect of a peak power output among positions showing MF>DF>FW (P<.05). MF revealed the highest peak power output at 15 and 30 seconds time points compared to DF and FW. As far as the players' positions were concerned, a relative anaerobic capacity showed a similar results with a peak power output (P<.05; MF>DF>FW). Unlike with these results, the fatigue index in different positions did not show any statistical significant results (P>.05). Based on these results, it was suggested that the systematical training program is required to perform a modern soccer, pressure and total soccer, in MF players. If the physical strength, especially power out, in MF players is enhanced, the results of the soccer games will be also improved.

지도자의 경쟁가치리더십과 선수만족 및 인지된 경기력의 관계

김종욱,양용길,이정수,장갑석,정종환 한국스포츠리서치 2004 한국 스포츠 리서치 Vol.15 No.3

The purpose of this study was to identify the relationships among competing value leadership, athlete satisfaction and performance in sport field, The instrument for data collection was a questionnaire in which competing value leadership consisted as identified by Ha(1996), athlete satisfaction consisted as identified by Che(1997), and performance consisted as identified by An(2002), 350 subjects were selected from universities in Seoul by the stratified cluster sampling method, Among these selected subjects, 322 responded, and data analyses consisted of employing descriptive statistics, one-way ANOVA, multiple-regression using SPSS/PC version 11.0. First, competing value leadership and athlete satisfaction differ statistically and partially according to socio-demographic variables of athletes, Second, athlete satisfaction and performance statistically and significantly is influenced by competing value leadership of leader, Third, athlete satisfaction statistically and significantly influence performance of athletes.