고속가공을 위한 검사시편에 관한 연구

정종윤,황영수,이춘만,정원지,고태조 한국공작기계학회 2003 한국생산제조학회지 Vol.12 No.4

The properties of a machine tool greatly affect machining quality since a machine tool has large variance in its features. Machine tool makers want to find best machining condition with the one that they have built. Machine builders need to develop test specimen since it helps finding characteristics of machine tools when the machining properties of the specimen are analyzed. This paper develops test specimen to identify features of the main spindle, the feeding device, and the frame of a machine tool. The specimen is machined with a high speed machine and the features of the machine are analyzed with test items. They are surface roughness, overshoot in axial movement, errors in circular movement, feeding with small movement, and compensational error. This work can improve usability for a machine tool in machining practice.

평면도파로의 소산장 결합을 이용한 광섬유형 자외선센서의 광강도에 따른 감도변화

윤종국,서규원,조강민,권혁춘,강신원 경북대학교 센서기술연구소 2002 센서技術學術大會論文集 Vol.13 No.1

교대의 조시시공을 위한 단계별 성토고 결정에 관한 연구

박춘식,장정욱,김종환 국립7개대학공동논문집간행위원회 2004 공업기술연구 Vol.4 No.-

This study suggests solutions to the problem of consolidation settlement or lateral movement, which may occur when roads or civil structures are constructed on soft clay. It also presents a proposal to determine appropriate height and time of embankment for early construction of abutment, on the basis of soil parameters in terms of reverse analysis. The following shows the summary of the study. (1) The Hyperbolic method was applied to the field measurement to compute a predictable final settlement. (2) The field measurement was analyzed by Asaoka method and a reverse analysis was carried out on the coefficient of consolidation of the vertical drain method. (3) The target amount of settlement was determined by the try and error method, which considered consolidation settlement to form the planned height. (4) Appropriate heigh and time of stepped embankment was determined to reach the target amount of settlement. (5) Slope stability of the step embankment was examined.

크랭크샤프트를 이용한 페달장치의 성능특성 해석

이종춘,김준안 慶南專門大學 2001 論文集 Vol.29 No.1

지속가능한 산림경영을 위한 기준 및 지표의 산림기능구분에 대한 적용성 연구

우종춘,장재영,신현지 江原大學校 森林科學硏究所 2005 Journal of Forest Science Vol.21 No.-

지속가능한 산림경영을 위하여 우리나라는 여러 가지 프로세스 중에 몬트리올 프로세스를 채택하고 있다. 본 연구에서는 우리나라에 적용 가능한 7개 기준. 27개 지표를 산림의 6가지 기능에 적용하였다. 산림기능에 대표성, 적합성, 가능성 기준과 지표를 각각의 산림 상태와 목표로 하는 방향을 고려하여 가장 비중 있게 적용되는 기준과 지표를 선정하였다. 그리고 각각 다른 산림에 모두 같은 기준과 지표를 가지고 산림을 평가할 수는 없으며 이를 적용하기 위해서는 산림에 대한 정확한 데이터와 지식이 필요 하다고 사료된다. To be a sustainable forest management, Korea took a Montreal process in many proccsses. This study applied seven criterias. twenty-seven indicators that are applicable indicators to the forest function type. Forest function type choose representation. suitability, possibility criterias and indicators that forest conditions are thought a great deal of wegit on th forest by a goal. And we can't estimate many forest with same criteria and indicators every time, to apply them need correct data and knowledge about forest.

韓末初期 義兵運動에 관한 硏究 : 柳麟錫의 乙未起義를 中心으로

李鍾春 淸州敎育大學校 1981 論文集 Vol.18 No.-

브라켓 기저부 형태에 따른 전단, 인장, 전단/인장복합결합강도의 비교

이춘봉,이승호,김정기 대한치과교정학회 1999 대한치과교정학회지 Vol.29 No.5

금속 브라켓의 결합강도에 영향을 미치는 요소인 브라켓 기저부의 형태와 결합 부위에 적용되는 힘의 특성에 대해 알아보고자 연구를 시행하였다. 형태가 다른 5종의 금속브라켓의 기저부와 결합강도 측정후 접착파절양상을 stereoscope and scanning electron microscope를 통해 관찰하고 결합 부위에 적용되는 힘은 전단결합강도, 인장결합강도, 전단/인장복합결합강도로 구분하고 결합강도를 비교하여 다음과 같은 결론을 얻었다. 1. 브라켓 기저부 형태에 따른 모든 군에서 전단결합강도(SBS)가 제일 컸으며, 인장결합강도(TBS)는 SBS의 50%정도 수준이었고 전단/인장복합결합강도(S/TBS)는 전단결합강도(SBS)의 30%정도이었다. 2. 브라켓의 결합강도는 Micro-Loc base가 가장 크고(SBS:22.86±1.37kgf, TBS:11.37±1.43kgf, S/TBS:6.69±0.34kgf), Integral base가 가장 작았다(SBS:10.52±1.27kgf, TBS:4.27±1.08kgf, S/TBS:2.94±0.58kgf). 3. 단위면적당 결합강도 비교시, Integral base가 가장 작았고(p<0.05), 전단결합강도와 인장결합강도에서는 Micro- Loc과 Chessboard base간의 차이가 없었으며(p>0.05), Non-Etched foil Mesh와 Micro-Etched foil Mesh base 간의 전단결합 강도와 인장결합강도는 차이가 없었으나, 전단/인장복합결합강도에서는 Micro-Etched Foil Mesh base가 Non-etched Foil Mesh base보다 더 크게 나타났다. 4. 전단, 인장, 전단/인장복합결합강도 측정후 접착파절은 브라켓/레진 계면에서 일어나 ARI score가 작게 나타났다. The purpose of this study was to evaluate shear, tensile and shear/tensile combined bond strenghts(SBS, TBS, S/TBS) in various orthodontic brackets bonded to human teeth with chemically cured adhesive (Ortho-one, Bisco, USA). Five types of metal brackets with various bracket base configurations (Micro-Loc base(Tomy, Japan), chessboard base(Daesung, Korea), Non-Ethed Foil Mesh base(Dentarum, Germany), Micro-Etched Foil Mesh base(Ortho Organiners, USA), Integral base(Unitek, USA)) were used in this study. Shear, tensile and shear/tensile combined bond strengths according to the direction of force were measured by universal testing machine. The bracket base surface after bond strength test were examined by stereoscope and scanning electron microscope. The assessment of resin remnant on bracket base surface was carried out by ARI(adhesive remnant index). The results obtained were summarized as follows : 1. In all brackets, SBS was in the greatest value(p<0.05), TBS was in 50% level and S/TBS was in 30% level of SBS. 2. In bond strength, Micro-Loc base bracket showed the maximum bond strength(SBS : 22.86±1.37kgf, TBS:11.37±0.42kgf, S/TBS:6.69±0.34kgf) and Integral base bracket showed the minimum bond strength(SBS : 10.52±1.27kgf, TBS:4.27±1.08kgf, S/TBS:2.94±0.58kgf) (p<0.05). 3. In bond strength per unit area, Integral base bracket showed the minimum value, Micro-Loc base and Chessboard base brackets were in similar value(p>0.05). Non-Etched Foil Mesh base and Micro-Etched Foil Mesh base bracket were similar in SBS and TBS(p>0.05), but Micro-Etched Foil Mesh base bracket was greater than Non-Etched foil Mesh base bracket in S/TBS(p<0.05). 4. Bond failure sites were mainly between bracket base and adhesive, therefore ARI scores were low.

젊은 남자에게 발생한 통상성 간질성 폐렴과 동반된 폐암 1예

박종숙,이준혁,박성우,장안수,박춘식,박재성,백상현,고은석,신화균 순천향의학연구소 2004 Journal of Soonchunhyang Medical Science Vol.10 No.2

Usual interstitial pneumonia(UIP) is relatively rare disease of lung parenchyme under the age of 50. Lung cancer is reported to occur as a complication of UIP, but has not been reported in young age patient with UIP in Korea. A 35-year-old man was admitted to the hospital because of dyspnea, cough and mild fever. He had been suffered from dyspnea during 3 years. The dyspnea worsened recent 1 month ago. He had been treated with pneumonia at another hospital during 4 months before this admission. Chest radiographs and High resolution CT showed subpleural and basal dominant reticular opacities in both lung with no change until now. He was smoker and his occupation was car engine-man dealing with benzene. UIP is suspected by history and radiologic findings. Operation for open lung biopsy was performed to obtain lung specimen via video-assisted thoracoscopic surgery. Patient's pathologic examination showed UIP combined with adenocarcinoma in RLL superior segment and posterobasal segment and RLL lobectomy was done. After operation, the patient has been in cancer free condition so far. We report a case of UIP combined with lung cancer in young man with brief review of the literature.

Southern Blot Hybridization법을 이용한 악성 림프종의 면역유전형에 관한 연구

전호종,기근홍,김윤신,이미숙,이미자,장원재,장숙진,박영진,정춘해,정종훈,양성훈,이광민 조선대학교 1994 The Medical Journal of Chosun University Vol.19 No.2

Immunogenotyping using gene rearrangement analysis has emerged as a precise laboratory aid in the diagnosis and classification of malignant Iymphoid neoplasms. The lineage and clonality of the malignant Iymphoid neoplasms can be identified by the demonstration of rearrangements of antigen receptor genes of the immunoglobulin and T-cell receptor genes. The analysis of the gene rearrangements on the malignant Iymphoid neoplasms are also useful as a sensitive unique clonal markers to detect early recurrence in patients with malignant Iymphoid neoplasms after treatment. To analyze the sensitivity and specificity of gene rearrangements in the diagnosis of malignant Iymphoid neoplasms. 24 cases of malignat Iymphoma were examined by Southern blot hybridization using CTβ-T cell receptor β chain gene-DNA probe and JH-immunoglobulin heavy chain gene-DNA probe. The results of the immunogenotypings using Southern blot hybridization disclosed high correlation between the immunophenotyping using immunohistochemical stain with monoclonal antibodies (B-cell Iymphoma 84.2%. T-cell Iymphoma 75% ). The analysis of the gene rearrangement of the angioimmunoblastic lymphadenopathy(AILD) and unclassifiable Iymphoma using immunohistochemical stain could resolve the monoclonality and lineage . Rearranged bands to the CTβDNA probe were observed in one case out of 2 cases of AILD. One case of unclassifiable Iymphoma showed rearranged bands to the CTβ DNA probe. There were no rearrangements in reactive follicular Iymphoid hyperplasia and paracortical Iymphoid hyperplasia. In conclusion, DNA gene rearrangement study should be applied to differentiate the clonality and cell lineage in the malignant Iymphoma with indistinctive immunophenotype.

적분형 최적레귤레이터법을 이용한 가변속 멀티 열펌프의 실내온도 및 과열도 제어

최종민,이춘재 한밭대학교 2004 한밭대학교 논문집 Vol.21 No.-

A variable speed multi-heat pump provides the benefits of comfort, energy conservation and easy maintenance. Recently, the multi-heat pump has been employed in small and medium-sized buildings. However, the control algorithms for multi-heat pump are limited in literatures due to complicated system parameters and operating conditions. In this study, the controller of an integral optimum regulator employing the state space method was designed and applied to the variable speed multi-heat pump system to obtain efficient control of the MIMO(multi input multi output) system. System identification of the multi heat pump was executed by a prediction error algorithm using PRBS(pseudo random binary sequence) for EEV 1 and 2 openings and compressor speed. The integral optimum regulator, which was designed for MIMO system using the state space method, showed appropriate control performance at all indoor and outdoor loads.