http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박진혁,황의호,이근상,채효석 한국지리정보학회 2004 한국지리정보학회지 Vol.7 No.4
본 연구에서는 원격탐사나 지리정보시스템 등을 적응하여 ASCII형태의 수지표고자료와 원격탐사 자료를 이용하여 분류한 토지피복도를 이용하여 각 토지피복별로 알베도와 바로크계수, 증발효율 등을 이용할 수 있는 격자형 토지피복자료를 격자단위로 분할하여 모형의 입력값으로 이용하였기 때문에 유역의 공간적인 특성을 반영한 덜다 정확하고 신뢰성있는 자료의 구축이 가능했고, 기존의 열수지법을 이용하여 증발산량의 시 공간적인 분포양상을 계산할 수 있는 격자기반의 분포형 증발산량 추정 프로그램을 포트란언어고 개발하였으며, 격자형 증발산량 산정 모형은 향후 연될 격자기반의 분포형 강우-유출모형과 통합할 수 있도록 고려하였다. 또한, 격자기반의 계산으로 증발산량에 대한 유역내 특정지점에서의 시7)적 변화 양상과 공간적 분포 양상을 GIS상에서 나타낼 수 있도록 구성하였다. 모형의 적용성 검증을 위해서 비교적 정화한 기상자료와 수문자료를 보유하고 있는 일본의 쇼나이강 유역(532㎢)을 대상으로 적응한 결과, 유역 연평균 증발산량은 825.4mm로 나타났다. A Grid-based distributed evaporation prediction model which calculates temporal and spatial evaporation with a heat balance method was developed. And, the model was considered as the integration with distributed hydrological model in near future. This model was programmed by fortran language and used ASCII formatted map data of DEM (Digital Elevation Model) and land cover map extracted by remote sensing data. Also, temporal variations and spatial distributions of evaporation are presented by using GIS. To verify the applicability of the model, it was applied to the Shonai river basin (532㎢) which has sufficient meteorological and hydrological data, Japan. The result shows that the estimated mean annual evaporation was 825.41nm, and this value is estimated as suitable things in considering rainfall and discharge data in study area.
Effect of Graphene on Growth of Neuroblastoma Cells
( Park,Hye Bin ),( Hyo Geun Nam ),( Hong Gi Oh ),( Jung Hyun Kim ),( Chang Man Kim ),( Kwang Soup Song ),( Kwang Hwan Jhee ) 한국미생물 · 생명공학회 2013 Journal of microbiology and biotechnology Vol.23 No.2
The unique properties of graphene have earned much interest in the fields of materials science and condensedmatter physics in recent years. However, the biological applications of graphene remain largely unexplored. In this study, we investigated the conditions and viability of a cell culture exposed to graphene onto glass and SiO2/Si, using a human nerve cell line, SH-SY5Y. Cell viability was 84% when cultured on glass and SiO2/Si coated with graphene as compared with culturing on polystyrene surface. Fluorescence data showed that the presence of graphene did not influence cell morphology. These findings suggest that graphene may be used for biological applications.
박효근,김형석 순천향대학교 부설 산업기술연구소 2001 순천향 산업기술연구소논문집 Vol.7 No.1
If the geometry of the problem is not one of the simplest, it is very difficult and time comsuming to subdivide the domain into a huge number of triangles by hand-made in order to apply Finite Element Method to analysis model. This paper presents a two dimensional automatic mesh generation which can be easily applicable to electromagnetic problem of complex shape for the finite element method. We implemented an automatic mesh generator using Delaunay triangulation in the windows environments.
박상현,박재윤,구효근,김경환 경남대학교 신소재연구소 1999 論文集 Vol.11 No.-
RF-MW 혼합프로세스를 사용하여 다이아몬드 막을 만들 때, 우선 RF 플라즈마CVD법으로 실리콘 기판 위에 다이아몬드 시드를 증착시키고, 그 시드로부터 MW 플라즈마CVD법에 의해 다이아몬드 막을 성장시켰다. RF-MW 혼합프로세스를 사용하여 성장된 다이아몬드 막은 MW 프로세스만으로 성장된 막에 비해 결정입계의 크기는 작고, 조밀해졌으며, 결정성 또한 더 좋아졌다. 성장된 다이아몬드 막은 전자현미경, X-선 회절기, Raman분광기 등으로 분석하였다. In case of making the diamond films by using RF-MW mix-process, at first. diamond seeds were deposited on silicon substrate by RF plasma CVD, and then diamond layer grown by MW plasma CVD from the seeds. The grain-size of diamond films deposited by using RF-MW mix-process was smaller and denser, in addition, crystallity of diamond films was better than MW plasma CVD process. The deposited diamond films were analyzed by SEM, XRD, and Raman spectroscopy.
MWPECVD法에 의한 H₂-CH₄-O₂계로 부터의 Diamond合成
구효근,이임숙,박상현 경남대학교 신소재연구소 1995 論文集 Vol.5 No.-
마이크로파 플라즈마 기상합성법으로 CH₄-H₂-O₂의 혼합가스로부터 실리콘 기판 위에 다이아몬드 박막을 성장시켰다. 가스 조성비에 따른 박막과 입자의 표면형태, 성정율 및 막의 질을 SEM, XRD 및 Raman 분광기로 조사하였다. 그 결과 CH₄-H₂화합가스에 산소를 첨가함에 따라 어떤 조건하에서는 막의 질과 성장률이 증가하였다. Diamond thin films deposited on Si substrate from CH₄-H₂-O₂gas mixtures were investigated by microwave plasma chemical vapour deposition. The surface morphology of films and particles, the deposition rate and the films quality(SEM. XRD and Raman spectroscopy) were measured as function of gas composition. The results demonstrate that the addition of oxygen to CH₄-H₂gas mixtures can under certain conditions improve the film quality and increase the deposition rate.
들잔디 성숙종자로부터 캘러스배양 및 식물체 재분화에 미치는 몇 가지 요인의 영향
이상훈,김범수,원성혜,조진기,김기용,박근제,성병렬,이효신,이병현 Plant molecular biology and biotechnology research 2004 Plant molecular biology and biotechnology research Vol.2004 No.-
In an effort to optimize tissue culture responses of zoysiagrass (Zoysia japonica Steud.) for genetic transformation, factors affecting callus induction and plant regeneration were investigated. MS medium containing 3 ㎎/L 2,4-D was optimal for embryogenic callus induction from mature seed. The plant regeneration frequency of 73.3% was observed when embryogenic calli induced in this medium were transferred to N6 medium supplemented with 0.1 ㎎/L 2,4-D and 5 ㎎/L BA. Among several basic media, MS and N6 medium were optimal for callus induction and plant regeneration, respectively. Regenerated plants were grown normally when shoots transplanted to the soil. A rapid and efficient plant regeneration system established in this study will be useful for molecular breeding of turfgrass through genetic transformation.
Park, Chang Geun,Park, Su Hong,Kim, Youngseo,Nguyen, Thanh Luan,Woo, Han Young,Kang, Hungu,Yoon, Hyo Jae,Park, Sungnam,Cho, Min Ju,Choi, Dong Hoon The Royal Society of Chemistry 2019 Journal of Materials Chemistry A Vol.7 No.37
<P>Conjugated block copolymers containing donor (D) and acceptor (A) blocks have high potential for single component polymer solar cells (SC-PSCs), but still exhibit the complexity of polymer synthesis and low device efficiency. In this research, we successfully synthesized a new fully conjugated D-A block copolymer (CDABP) by performing the entire reaction in one-pot from start to completion. This polymerization method has the advantage of saving synthesis time and cost. The photoluminescence (PL) of the CDABP film was completely quenched due to photoinduced inter/intramolecular charge transfer. A single component polymer solar cell (SC-PSC) with a CDABP film annealed at 180 °C showed the maximum power conversion efficiency (PCE) of 5.28%, a high short circuit current of 10.77 mA cm<SUP>−2</SUP> and a fill factor of 62.86%, which is much higher than that (2.62%) of the device with the as-cast film. This performance can be attributed to its fine internal/surface morphology and high crystallinity of the CDABP film. In addition, transient absorption experiments on the CDABP films showed that charge carrier generation is faster and the lifetime of the generated charge carriers is longer in the annealed film than in the as-cast film. Our research explicitly provides a new structural design and simple synthesis strategy for D-A conjugate block copolymers for high-efficiency SC-PSCs.</P>