Pocine Adenovirus-3의 E1B Region의 鹽基序列 分析

朴鍾賢,宋載永,李重馥,玄芳勳,安東濬,車相昊,裵用泰,姜永源,Reddy, P S,全茂炯,安壽煥 충남대학교 생물공학연구소 1999 생물공학연구지 Vol.7 No.-

돼지 아데노바이러스(PAV-3). 6618주의 EIB region이 包含되어 있는 map unit 4.0에서 9.7까지의 유전자에 대한 1,984 bp의 염기서열을 決定하였으며, 이 結果를 알려진 여러 아데노바이러스 유전자와 비교하여 다음과 같은 결과를 얻었다. 1. PAV-3의 EIB유전자는 10개의 ORF로 구성되어 있으며, 그 중 아데노바이러스의 단백질과 유사성이 있는 것은 ORF1, ORF2 및 ORF3이었다. ORF1은 Ad41의 19kd 와 BAV-2에서의 EIB ORF2에서의 아미노산의 一致率은 각각 32%와 31%이었다. 2. ORF2는 Ad2 55kd protein과 tupaia adenovirus 44kd protein가 각각 34%로 아미노산 一致率이 가장 높았으며, Ad41의 52kd protein. BAV-3의 EIB ORF3에서도 33%의 一致率을 보였다. 3. ORF1은 61-666 uncleotide (606 bp), ORF 2에서는 429-1,850 uncleotide (1,422 bp)의 부위로 각각 202, 474 a.a로 構成되었으며, 예상되는 분자량은 20 kd와 52 kd이었다. 4. ORF3는 hexon-associated pIX유전자로 추정되며 내부에 1개의 polyadenylation signal(ATAAA)이 1938-1942 uncleotide에 위치하였으며, 이 부위는 TATA box (1937-1942 uncleotide)와 중복되어 존재하였다. Porcine adenovirus type 3 (PAV-3) does not cause severe infection in pigs. Adenovirus has been suggestive of live vaccine vector carrying foreign gene. One of insertion regions is delayed early (EIB) region. However, EIB region of PAV-3 has not been molecularly characterized to date. Nucleotide sequence of EIB of PAV-3 was determined. The EIB region was composed of 1,984 bp and located between 4.0 and 9.7 map units. Three potential open reading frames(ORFs) with low level of homology to other adenoviruses and a polyadenylation signal were identified in the rightward direction of genome. The nucleotide and the predicted amino acid sequences of EIB were compared to those of human and animal adenoviruses. One of the three potential ORFs. ORF1 encoded a polypeptide homologous to bovine adenovirus type 2(BAV-2) ORF2 and human adenovirus type 41(Ad41) 19 kd protein. ORF2 encoded a polypeptide homologous to human adenovirus type 2(Ad2) 55 kd protein, bovine adenovirus type 3(BAV-3) ORF3 and porcine adenovirus type 4(PAV-4) ORF2. The predicted protein of ORF1 had homology to those of Ad41 and BAV-2 with 32 and 31% respectively, whereas the deduced protein of ORF2 had homology to those of Ad2. BAV-3 and PAV-4 with 34, 33 and 29%, respectively.

국내에서 분리된 canine parvovirus의 구조유전자 cloning과 염기서열 분석

박종현,송재영,이중복,현방훈,안수환,전무형 충남대학교 생물공학연구소 1993 생물공학연구지 Vol.3 No.-

In this study gene encoding structural proteins of a CPV isolate was cloned and saquenced to elucidate the molecular genetical properties of the canine parvoviruses isolated from the field. Six recombinant plasmids of pEP3, p1471, p2070, pEP069, pEP338 and p14711p were constructed from the map positions 22 to 98 of RF DNA to clone the VP1 and VP2 genes of CPV-V20. Sequentialy the gene comprising 3780 nucleotides were sequenced by dideoxy chain termination method. When nucleotide sequence of gene encoding the structural proteins of CPV-V20 was compared with those of other strains, CPV-N, CPV-d and CPV-780929 published previously. DNA homologies to CPV-V20 were 99.87% with CPV-NM, 99.73% with CPV-d, 96.85% with CPV-780929 AND 98.4% with FPLV-Carl, respectively. The DNA sequence data of CPV-V20 showed seven point mutations and also deletion of 135 nucleotides from the nucleotide position 4745 to 4879 located in the 3-noncoding region of CPV-N.

이차원 LMS 알고리즘의 Systolic Array 구현

박완수,최훈,홍기섭,박봉수,배현덕 충북대학교 컴퓨터 정보통신 연구소 2000 컴퓨터정보통신연구 Vol.8 No.1

적응알고리듬의 VLSI 구현에 있어서 파이프라이닝이나 시스토릭과 같은 구조적 설계기법을 이용하여 알고리듬을 변환하는 것은 효과적이다. 알고리듬 변환은 z-변환 영역에서 연산의 규칙성과 반복성을 찾아 이루어 진다. 본 논문에서는 이차원 필터와 계수갱신 시스템을 시스토릭 구조로 설계하여 LMS의 확장 형태인 TDLMS을 STDLMS로 변환한다. 변화된 STDLMS를 이용 이차원 ALE를 Altera사의 Max-PlusII 상에서 구현하여 시뮬레이션을 통해 성능을 평가한다. 시뮬레이션 결과 salt-pepper 잡음과 가우시안 잡음에 오염된 화상을 ALE가 개선할 수 있음을 보였다. In VLSI realization of adaptive algorithm. it is necessary and efficient that the algorithm is transformed to structural one suitably using architectural design techniques such as pipelining or systolic array. These transform method use regular and recursive of operation of the algorithm on z-transform domain. In this paper, the TDLMS which is a extended version of LMS is transformed to STDLMS which has systolic array architecture in two dimensional filter and coefficients update system. The transformed STDLMS is applied for realization of two dimensional ALE. And the ALE performances are evaluated by Max-PlusII of Altera Co.. The simulation results show that the ALE enhances image data which were corrupted by salt-pepper noise and Gaussian noise.

Baculovirus를 利用한 Canine Parvovirus VP2蛋自質의 發現

朴鍾賢,宋載永,玄芳動,安動濬,姜永源,全茂炯,安壽煥 충남대학교 생물공학연구소 1998 생물공학연구지 Vol.6 No.-

국내에서 分離된 개파보바이러스주(V20주)의 VP2 遺傳子를 baculovirus system을 이용하여 발현시켜 다음의 結果를 얻었다. 1. 개파보바이러스의 VP2 유전자를 PCR에 의해 增幅하여 1755bp의 VP2遺傳子를 pUC19에 클로닝하여, 클로닝된 遺傳子를 polyhedrin promoter를 가지는 baculovirus expression vector인 pVL1393에 옮겨 VP2 발현벡터인 pVL1393-VP2를 얻을 수 있었다. 2. pVL1393-VP2 plasmid와 baculovirus DNA와의 homologous recombination에 의해 재조합바이러스인 VP2-BV를 얻을 수 있었으며, 그 발현효율은 2.000-5.000 HAU/0.05 ml이었다. 3. 免疫沈澱法에 의해 발현된 단백질은 개파보바이러스의 VP2단백질과 유사한 64 kb에 달하는 것이었으며, 血球凝集能을 지니고 있었다 4. 血球凝集能을 지닌 蛋白質이 여러 陽性血淸에 있어서 抗體수준을 測定할 수 있는지 개파보바이러스항원과의 相關性을 比較한 바 0.94 (n=125. p<0.01)의 相關係數를 보였다 5. 발현 VP2白은 virus-like particles를 形成하였으며, 그 크기로는 개파보바이러스와 비슷한 25 ㎚의 크기를 갖았다. Canine parvovirus(CPV) is a member of autonomous replicating parvoviruses and is aetiologically associated with enteritis and mycoarditis in puppies. The capsids of CPV are composed of three structural proteins: VP1, VP2 and VP3. The VP2 protein is the major component of capsid. The VP2 gene of a canine parvovirus. V20 strain isolated in Korea was cloned into baculovirus expression vector, and subsequently the VP2 protein was expressed by a recombinant baculovirus under the control of polyhedrin promoter. The recombinant VP2 protein expressed in Spodoptera frugiperda 9(Sf9) cells was detected by haemagglutination(HA) test and immunofluorescent antibody assay. Molecular weight of the recombinant VP2 protein expressed was estimated as 64Kd when tested by immunoprecipitation test using anti-CPV monoclonal antibody. In haemagglutination inhibition(Ⅲ) test. 8 HA units of the recombinant VP2 protein antigen was successfully utilized to determine a level of antibody against CPV in various positive sera. The recombinant VP2 protein showed also the capability to form virus like particles similar in size and appearance to the CPV virions.

투상도법을 이용한 건축디자인의 형태생성에 관한 연구 : Preston Scott Cohen과 Peter Eisenman의 작품을 중심으로

박현수,심은주 대한건축학회 2004 대한건축학회논문집 Vol.20 No.6

This study proposes a digital design method using a projective perspective, one of classical architectural principles, for architectural design profession. After observing fundamental principles of architectural design in projective geometry and its usage in design process, a digital method is proposed as an application to generate and develop architectural objects. The usage case of projective perspective method in two architects' design works was analyzed. As a bridge from the fundamental principles of architecture to contemporary practice, this study aims to relate the projective perspective to new generative approaches with the help of digital technology and make a contribution to design strategies of form-making in architecture. Previous research on projective perspective method with theory and practical issue was studied to find an adequate digital form-making process. Extensions of theory and design method related to projective geometry was sought to propose design possibilities utilizing digital technology. Also, method of using digital tool is presented in order to demonstrate the findings and issues to give directions in developing an expanded digital process.

골격성 Ⅲ급 부정교합자에서 중심위 변위가 두부 방사선 계측치에 미치는 영향

박양수,김종철,황현식 대한치과교정학회 1996 대한치과교정학회지 Vol.26 No.3

본 연구는 Ⅲ급 부정교합자에서 중심교합상태의 두부 방사선 사진과 MPI 수치를 이용하여 중심위로 전환한 두부 방사선 사진(Centrically related cephalometrics)를 계측하여 중심위 변위시 유의한 계측치 변화가 있는지 확인하고자 시행되었다. 교정치료의 경험이 없는 25명의 Ⅲ급 부정교합군과 25명의 정상교합군을 대상으로 하여, 중심교합위 상태의 측모 두부 방사선 사진과 중심위 및 중심교합위 기록을 채득하고, 모형을 SAMⅡ 교합기에 부착하였다. 중심위 변위량은 MPI(Mandibular Position Indicator)를 이용하여 계측하였으며, MPI 수치와 중심교합위 상태의 측모 두부 방사선 사진의 투사도를 이용하여 Conversion work sheet상에서 중심위 전환을 시행하였다. 두부 상사선 계측 항목은 하악골의 위치와 관계되는 것을 선택하였다. 정상교합군과 Ⅲ급 부정교합군에서 중심위와 중심교합위간의 계측치 변화를 연구하여 다음과 같은 결과를 얻었다. 1. 하악 과두에서의 중심위 변위량은 정상교합군에서 전후방 변위량(ΔX)0.56±0.50mm, 수직적 변위량(ΔZ) -0.61±0.53mm였으며, Ⅲ급 부정교합군에서 전후방 변위량 (ΔX) 0.093±0.77mm, 수직적 변위량(ΔZ) -0.64±0.89mm로, 두군 보두 후하방 변위양상을 나타냈다. Ⅲ급 부정교합군에서 정상교합군보다 전후방 변위량이 더 크게 나타났으나 통계학적인 유의성은 없었다. 2. 중심교합위와 중심위 두부 방사선 사진의 계측치를 비교해 본 결과 정상 교합군에서 ANB, Facial angle, Facial convexity, ODI 등의 항목이 유의한 차이를 나타냈다. Ⅲ급 부정 교합군에서는 ANB, Facial angle, facial convexity, ODI, SNB, APDI, L1-FP 등 유의한 차이를 보이는 항목이 더 많았고 유의성도 더 높게 나타났다. 3. 두부 방사선 사진의 계측치 변화는 중심위 변위와는 연관성이 있었으나, 정상교합군과 Ⅲ급 부정교합군에 대한 연관성이 없었다. 이상의 결과는 중심의 변위량이 임상적으로 재현할 수 있는 중심위 위치에서 정상적으로 변위되는 양보다 큰 경우 중심위는 교정 환자에서 적절한 진단과 치료 계획 수립을 위한 기준 점으로 고려되어야 함을 시사하였다. The purpose of this study was to investigate if there were a significant difference between cephalometric measurements of mandibular position derived from a centric occlusion tracing compared to those of a converted centric relation tracing in the Class Ⅲ malocclusion. The sample consisted of 25 ClassⅢ malocclusion and 25 normal occlusion persons who had no orthodontic treatment. The records included an lateral cephalometrics in centric occlusion, centric relation and centric occlusion bite registration and diagnostic casts mounted on the SAM Ⅱ articulator in CR. The amount of CR-CO discrepancy of condyle was recorded using a MPI(Mandibular Position Indicator, MPI 200, Great Lakes Orthodontics, USA). The conversion of the CO cephalogram to CR using the MPI readings was performed on the Conversion work sheet. Measures of mandibular position were chosen for the purpose of this study. The comparison of the difference between CO and CR cephalometric measurements in the normal occlusion and Class Ⅲ malocclusion group were studied. The results were as follows: 1. In the features of CR-CO discrepancy of the condyle, the condyle was displaced posterior and inferior when the teeth were in centric occlusion. The horizontal component(ΔX) in Class Ⅲ malocclusion group was greater than the vertical component(ΔX) and also greater than the horizontal component(ΔZ) in normal occlusion group. There was no statistically significant correlation between MPI measurements and the groups of normal occlusion and Class Ⅲ malocclusion group. 2. In the comparison of the cephalometric measurements in each group, Normal occlusion group showed significant difference in measurements such as ANB, Facial angle, Facial convexity and ODI. ClassⅢ malocclusion group showed significant difference in measurements such as ANB, Facial angle, Facial convexity, OEI, SNB, APDI, L1-FP and it had more significance than the normal occlusion group. 3. The Value of cephalometric measurements was significantly different between CO and CR but there were no differences between the groups of normal occlusion and Class Ⅲ malocclusion. The results of this study suggest that if the discrepancies are greater than the amount of normal displacement from clinically captured centric relation, centric relation should be considered as the starting point for proper diagnosis and treatment planning.

건축디자인 입체조형구성을 위한 디지털 모델링 방법에 관한 연구 : 정육면체 절점 상의 조형요소 배치를 통한 모델링 방법을 중심으로

박현수 대한건축학회 2004 대한건축학회논문집 Vol.20 No.6

The purpose of this study is to propose a generative three-dimensional digital modeling method using a legacy CAD system for the practice of architectural design and education of spacial perception. A digital tool for design experiment was built as a prototype to produce and allocate design elements efficiently in a cubic framework of Euclidean linear geometry. Through this method, user can construct a three-dimensional shape, which is composed of various design elements and grid, using directional vector and spacial position values as functional variables. Previous research on three-dimensional modeling method with generative modeling issue and design education tool was studied to find an adequate digital modelling process. A prototype system is presented in order to demonstrate the key elements in the proposed method. Findings and issues are discussed to give directions in developing an expanded digital modeling method.

열 변화에 의한 구리전선의 미세조직 및 상 변화에 관한 연구(Ⅲ)

박성우,김윤회,김상현,박남규,김수철,김영만 內務部 國立科學搜査硏究所 2002 國立 科學 搜査 硏究所 年報 Vol.34 No.-

Garcin 증후군으로 발현된 연골육종 1예

강성수,김명권,박현미,류근신,신동진 대한신경과학회 1999 대한신경과학회지 Vol.17 No.2

성견 절치에서 수직 골결손 형성후 함입이동시 치주조직의 반응

박양수,김영준,최홍란,황현식 전남대학교 치과대학 2000 전남치대논문집 Vol.12 No.1

The present study was performed to investigate the periodontal response following orthodontic intrusion of teeth with vertical bony defect produced by periodontal disease. Vertical bony defect and periodontal disease were produced adjacent to the both maxillary second lateral incisors in four adult dogs, weighing 20kg or more. Four weeks later, a flap operation was performed to eliminate inflammation and a reference notch was made on the root surface at the level of bottom of each defect. Two weeks after periodontal surgery, four weeks of intrusion and another four weeks of retention was executed on the right incisors while left incisors served as the control. Through the histologic analysis, following results were obtained. 1. The periodontal lesion which was produced by elastics and artificial bony defect was characterized by three walled infrabony pocket. 2. In the histologic section of control side, the base of the pocket was located below the level of the cemento-enamel junction. Connective tissue attachment was formed apically from the base of the pocket. 3. On the experimental side, the base of the pocket was localized close to the cemento-enamel junction. Connective tissue attachment was formed near to pocket base and extended apically. 4. New cementum was formed from the notch coronally toward the epithelial junction along the root surface in the both intruded incisors and control. 5. In the fluorescence microscopic observation, bone regeneration was began at the base of defect and the remodelling pattern characterized by a combination of coronal bone generation and resorption of the marginal crest could be detected. Although the remodelling pattern was the same in the both side, the bone remodelling in intruded incisors was continued during tooth movement. The results of the present study suggest that an orthodontic intrusion of extruded incisors with vertical bony defect can be carried out with a desirable periodontal response, provided that both the oral hygiene and the biomechanical force system are kept under control.