http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
원심분사주조법에 의한 Cu-X(=Al2O3 , W)p 복합재료의 미세조직 및 복합화
배차헌,정해용 ( Cha Hurn Bae,Gae Yong Jeong ) 한국주조공학회 1997 한국주조공학회지 Vol.17 No.5
N/A Particle reinforced metal matrix composites(MMCs) via a centrifugal spray-cast deposition(CSD) process were fabricated by injecting second phase particles(Al₂O₃<40 )㎛, W<17.3 ㎛) into copper melt on the atomizing disc. Compositing modes were investigated by combining microstructures and mathematical modeling between Cu droplets and the reinforced particles injected. The Cu/W_P powders were shown that the W particles penetrate and get embedded in the Cu droplets. It is considered that the W particles composite preferentially in Cu melt on the atomizing disc. On the other hand, the Al₂O, particles did not penetrate into the Cu droplets on the atomizing disc but get attached in surface of Cu droplets during the flight. It is considered that the compositing may be attained in the flight distance which the relative velocity between Cu droplet and Al₂O, particle is maximum. The microstructure of the Cu/W_P and the Cu/(Al₂O,)_P composite preform was strongly influenced by compositing modes of droplets, and after subsequent deposition it was comprised as it is called the dispersed type and the cell type of microstructure,respectively. (Received July 24, 1997)
2D 및 3D 디지털 이미지 분석과 함께 Moire Tophography 분석을 이용한 화장품의 가슴 탄력개선 효과 평가
서영경 ( Young Kyoung Seo ),유미애 ( Mi Ae Yoo ),류자현 ( Ja Hyun Ryu ),김소정 ( So Jeong Kim ),조성아 ( Seong A Cho ),남개원 ( Gae Won Nam ),조준철 ( Jun-cheol Cho ),부용출 ( Yong Chool Boo ),고재숙 ( Jae-sook Koh ) 대한화장품학회 2012 대한화장품학회지 Vol.38 No.4
외과적으로 가슴의 볼륨 측정은 석고법, 가슴 X선 사진을 이용한 가슴의 볼륨을 산출하는 방법과 MRI, 3차원 측정 시스템 등을 이용한 측정 방법들이 주로 이용되었다. 그러나 최근 화장품 영역에서 가슴 볼륨 증가 및 탄력개선 제품의 증가로 효능평가가 필요하나 외과적 방법들의 적용은 어려운 실정이다. 그리하여 본 연구는 화장품 영역에서 최초로 등고선 사진을 이용하여 가슴 탄력개선을 평가하였다. 또한 가슴둘레 측정, 디지털 이미지 분석, 3차원 가슴이미지 분석 값과의 상관성을 비교하였고 등고선 사진평가를 가슴의 탄력을 평가하는 새로운 방법으로 제안하고자 하였다. 본 연구는 병력조사 및 피부 상태 진단을 통해 건강한 여성 피험자 30명이 시험에 참여하였다. 피험자로 하여금 제품사용전과 2주, 4주, 8주 후 시점에서 가슴둘레 측정, 유두점의 각도와 거리 분석, Moire’s Topography를 이용한 scoring, 3D가슴측정을 실시하여 가슴확대 및 탄력개선 정도를 평가하였다. 평가 결과 디지털 이미지를 분석결과 유두점의 각도(Angle)는 시점별로 증가하는 경향을 보였으나 유의성은 없었다. 유두점으로부터 밑가슴까지의 길이(Length)는 시점별로 유의하게 증가하였다(p < 0.05). 또한, 유두점으로부터 밑가슴까지의 높이는 4주 후, 8주 후 시점에서 통계적으로 유의하게 증가하였다(p < 0.05). Moire’s Topography Score 평가 결과 각 시점별로 유의하게 개선하였다(p < 0.05). 3차원 가슴 부피 분석 값은 각 시점별로 증가하는 경향을 보였으나 통계적 유의성은 없었다. 상관성 분석결과 Moire tophography score는 디지털 이미지 분석 값 중 길이, 높이와 유의한 상관성이 있었고 3차원 부피 분석 값과 유의한 상관성이 관찰되었다. 따라서 Moire’s Topography Score 평가는 이미지 분석과 3차원 부피분석 평가법과 더불어 화장품에 의한 탄력 및 처짐 개선을 평가하는 데 중요한 평가방법으로 사용될 것으로 사료된다. Cosmetic products which might augment the breast have attracted an attention and objective methods for the evaluation of such products are in high demand. This study was conducted to establish a method for assessing the breast-firmming effects of cosmetics. This study included a total of 30 healthy Korean females aged 20-50 years. A cosmetic product was applied by massaging it onto the breast twice a day for 8 weeks. Measurement of breast girth with a tape ruler, 2D and 3D digital image analyses, and Moire topographic analysis were performed before and following the treatment. The application of a cosmetic onto the breast significantly increased breast girth at 2, 4 and 8 weeks without a significant change in underbreast girth, implicating the breast might be augmented. The 2D image analysis indicated that the arc length of the breast which represents the surface distance from the nipple to the periphery of the under-breast was significantly increased at 2, 4 and 8 weeks. The height of the breast which represents the perpendicular distance from the nipple to the periphery of the under-breast was also increased significantly at 4 and 8 weeks. The 3D image analysis of body surface also demonstrated a significant increase of breast volume at 2, 4 and 8 weeks. Moire topographic analysis indicated that breast sagging was significantly reduced at 2, 4 and 8 weeks. The results of this study suggest that Moire topography in combination with 2D and 3D digital image analyses may be useful for evaluating the breast-augmenting effects of cosmetics.