http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정동규,정은진,이미선,김진영,송덕용,Chung, Dong-Kyu,Jung, Eun-Jin,Lee, Mi Sun,Kim, Jinyoung,Song, Duk-Yong 한국청정기술학회 2019 청정기술 Vol.25 No.2
2단 유동층 염화로에서 일메나이트광의 선택염화반응과 이산화티탄의 탄소염화반응의 염화도를 예측하기 위해서 shrinking core 모델과 유출률 및 입자파손을 고려한 수치 모델을 개발하였다. 입자분포를 고려하여 입자별 물질 수지와 염화반응을 반영할 수 있는 유동층 염화 반응 해석이 가능하다. 유동층 염화로의 실험값과 비교하여 약 6% 오차율의 정확성을 보였다. 입자 크기에 따라서는 입자 크기가 작을수록 염화도의 변화가 더 크게 나타났으며 염화도 1의 값에 도달하는 반응시간 차이가 약 100 min 정도로 나타났다. 온도의 변화($800{\sim}1000^{\circ}C$)에 대한 염화도의 변화는 염화도 0.9에 도달하는 반응시간이 약 10 min 차이로 크게 나타나지 않았다. 1단계 선택염화공정에서 일메나이트광의 질량감소율은 180 min 경과 시에 이론값인 0.4735 값에 근접하고, Fe 성분의 염화도는 $FeCl_2$ 또는 $FeCl_3$로 변환되어 180 min 경과 시에는 거의 1의 값을 보인다. 2단계 탄소염화공정에서 $TiO_2$의 염화도는 180 min 경과 시 0.98에 근접하고, 질량분율은 0.02에 도달하여 $TiCl_4$로 변환되는 것으로 나타났다. 1단계 선택염화공정에서 $TiO_2$는 180 min 경과 시에 98%까지 생성되었다가 연속적인 2단계 탄소염화공정에서 추가로 90 min 경과 시(총 경과 시간 270 min)에 99% $TiCl_4$로 전환되는 것으로 나타나고, 질량감소율도 99% 이상 감소하였다. Numerical model that considered the shrinking core model and elutriation and degradation of particles was developed to predict selective chlorination of ilmenite and carbo-chlorination of $TiO_2$ in a two stage fluidized bed chlorination furnace. It is possible to analyze the fluidized bed chlorination reaction to be able to reflect particle distribution for mass balances and the chlorination reaction. The numerical model showed an accuracy with error less than 6% compared with fluidized bed experiments. The chlorination degree with particle size change was greater with a smaller particle size, and there was a 100 min difference to obtain a chlorination degree of 1 between $75{\mu}m$ and $275{\mu}m$. This was not shown to such a great extent with variation of temperature ($800{\sim}1000^{\circ}C$), and there was only a 10 min difference to obtain a chlorination degree of 0.9. In the first selective chlorination process, the mass reduction rate approached to the theoretical value of 0.4735 after 180 min, and chlorination changed the Fe component into $FeCl_2$ or $FeCl_3$ and showed nearly 1. In the second carbo-chlorination process, the chlorination degree of $TiO_2$ approached 0.98 and the mass fraction reached 0.02 with conversion into $TiCl_4$. In the first selective chlorination process, 98% of $TiO_2$ was produced at 180 min, and this was changed into 99% of $TiCl_4$ after an additional 90 min. Also the mass reduction rate of $TiO_2$ was reduced to 99% in the second continuous carbo-chlorination process.
일메나이트 중 철의 선택적 염화와 선광된 TiO<sub>2</sub>의 추가 염화반응에 대한 글로벌 피팅함수
정동규,원용선,김용하,정은진,송덕용,Chung, Dong-Kyu,Won, Yong Sun,Kim, Yong-Ha,Jung, Eun-Jin,Song, Duk-Yong Materials Research Society of Korea 2019 한국재료학회지 Vol.29 No.7
Global fitting functions for Fe-selective chlorination in ilmenite($FeTiO_2$) and successive chlorination of beneficiated $TiO_2$ are proposed and validated based on a comparison with experimental data collected from the literature. The Fe-selective chlorination reaction is expressed by the unreacted shrinking core model, which covers the diffusion-controlling step of chlorinated Fe gas that escapes through porous materials of beneficiated $TiO_2$ formed by Fe-selective chlorination, and the chemical reaction-controlling step of the surface reaction of unreacted solid ilmenite. The fitting function is applied for both chemical controlling steps of the unreacted shrinking core model. The validation shows that our fitting function is quite effective to fit with experimental data by minimum and maximum values of determination coefficients of $R^2$ as low as 0.9698 and 0.9988, respectively, for operating parameters such as temperature, $Cl_2$ pressure, carbon ratio and particle size that change comprehensively. The global fitting functions proposed in this study are expressed simply as exponential functions of chlorination rate(X) vs. time(t), and each of them are validated by a single equation for various reaction conditions. There is therefore a certain practical merit for the optimal process design and performance analysis for field engineers of chlorination reactions of ilmenite and $TiO_2$.
하이브리드 위상 보간법을 이용한 서브-샘플링 기반의 2.4 GHz Fractional-N 위상 고정 루프
윤동현(Dong-Hyun Yoon),정동규(Dong-Kyu Jung),성기호(Ki-Ho Seong),유기태(Kitae Yoo),이우주(Woojoo Lee),백광현(Kwang-Hyun Baek) 대한전자공학회 2019 대한전자공학회 학술대회 Vol.2019 No.11
Phase locked loops (PLLs) are essential circuits to generate stable clocks in many applications requiring low noise and jitter, such as wireless communications and analog-to-digital converters. Among the various PLL structures, the sub-sampling fractional-N PLL structure utilizing a digital-to-time converter (DTC) is the most effective one to achieve improved in-band noise. However, this structure requires a high resolution DTC for noise protection, which exposes obvious limitations in terms of design complexity and difficulty, and power consumption. To tackle the limitations of the existing structure, this paper proposes new 2.4 GHz sub-sampling fractional-N PLL based on a hybrid phase interpolator (PI) composed of capacitors and tournaments. The introduction of the PI greatly reduces DTC overhead, while achieving low power consumption through a capacitor structure interpolator, and assuring the high accuracy of the phase generation through the tournament interpolator. The proposed PLL is designed in 65nm CMOS technology and demonstrates that the fabricated chip achieves 162 fs rms jitter, -247.3 dB FoM and -47 dBc fractional spurs.
방범 설비의 스마트화를 위한 인공지능 자율주행 CCTV 시스템
곽연규 ( Yeon-kyu Kwak ),김예진 ( Ye-jin Kim ),우진우 ( Jin-woo Woo ),정동규 ( Dong-gyu Jung ),유상오 ( Sang-oh Yoo ) 한국정보처리학회 2023 한국정보처리학회 학술대회논문집 Vol.30 No.2
본 논문에서는 치안 공백 문제 해결을 위해 인공지능 CCTV를 소개한다. 자율주행 RC카의 센서 및 영상 처리로 행인의 이상 행동을 자동 탐지하고 이를 통합 관제 애플리케이션과 웹사이트로 확인 및 제어하는 시스템을 개발하였다. 이 시스템은 부족한 인력을 지원하고 CCTV 사각지대를 최소화하며, 이를 통해 공공 안전에 이바지함으로써 시민들이 안전하게 살 수 있는 사회가 구축되기를 기대한다.
VCS 상관블록의 TCP/IP 출력데이터의 무결성 검사 소프트웨어의 개발과 성능개선에 관한 연구
염재환,노덕규,오충식,정진승,정동규,오세진,Yeom, Jae-Hwan,Roh, Duk-Gyoo,Oh, Chung-Sik,Jung, Jin-Seung,Chung, Dong-Kyu,Oh, Se-Jin 한국융합신호처리학회 2012 융합신호처리학회 논문지 (JISPS) Vol.13 No.4
본 논문에서는 VLBI상관서브시스템(VLBI Correlation Subsystem, VCS)의 상관블록 TCP/IP 출력데이터의 무결성 검사를 위한 소프트웨어의 개발과 상관출력 데이터의 손실을 방지하기 위한 성능개선 방법에 대해 기술한다. VCS의 상관결과는 TCP/IP 패킷 통신으로 데이터아카이브(Data Archive)에 저장된다. 본 논문에서는 데이터아카이브에 저장된 상관결과의 무결성을 확인하기 위해 VCS의 TCP/IP 패킷 정보를 이용한 무결성 검사 소프트웨어를 개발하였다. 개발한 소프트웨어를 이용하여 3단계의 무결성 검사 과정을 제안하고, 상관처리 실험을 통하여 제안방법의 유효성을 확인하였다. 또한 VCS와 데이터아카이브 사이에는 최소 적분시간 이내에 TCP/IP 패킷 통신이 완료되어야 하지만, 짧은 적분시간에 다량의 패킷과 대용량 데이터로 인해 패킷 손실이 발생할 뿐만 아니라 상관결과의 무결성 문제에도 영향을 미치는 것으로 확인되었다. 본 논문에서는 TCP/IP 패킷 손실의 원인을 분석하고 VCS의 FPGA(Field Programmable Gate Array) 설계에 대한 수정방법을 제시하여 상관결과의 무결성 문제를 해결하고자 한다. In this paper, we described the software development for verifying the integrity of output data of TCP/IP for VLBI Correlation Subsystem (VCS) correlation block and proposed the performance improvement method in order to prevent the data loss of correlation output. The VCS correlation results are saved at the Data Archive system through TCP/IP packet transmission. In this paper, the integrity verification software is developed so as to confirm the integrity of correlation result saved at the data archive system using TCP/IP packet information of VCS. The 3-step integrity verification process is proposed by using the developed software, its effectiveness was confirmed in consequence of correlation experiments. In addition, TCP/IP packet transmission must be completed within minimum integration period. However, there is not only TCP/IP packet loss occurred but also the problem of correlation result integrity affected in account of a large quantity of packets and data during short integration time. In this paper, the reason of TCP/IP packet loss is analyzed and the modified methods for FPGA(Field Programmable Gate Array) of VCS are proposed, the integrity problem of correlation results will be solved.