Isolation and Characterization of Antimicrobial Substance Macrolactin A Produced from Bacillus amyloliquefaciens CHO104 Isolated from Soil

( Seung Je Lee ),( Jeong Yong Cho ),( Jung Il Cho ),( Jae Hak Moon ),( Ki Deok Park ),( Young Ju Lee ),( Keun Hyung Park ) 한국미생물생명공학회 2004 Journal of microbiology and biotechnology Vol.14 No.3

전북 평야 수도작 농가의 담수직파 기술개발 방향 및 경제성 분석

조홍기,신용규,박정근 全北大學校 1995 論文集 Vol.39 No.-

New technology plays a role of stimulator in releasing the constraints on growth imposed by resource endowment in any society. In an economy with high population pressures and limited land, increases in output depend on the development of land-saving technology, that can release the constraints imposed by the inelastic supply of land. The development of fertilizer-responsive crop varieties, which is identified as biological technology, can essentially be a new technology designed to facilitate the substitution of fertilizer (or pesticides) for scare land and to raise yield per Ha. In an economy characterized by a relative scarcity of labour, the improvement of agricultural machinery that can save labour and raise labour productivity may reduce the problem of labour shortage. The constraints imposed by an inelastic supply of labour may be offset by advances in so called mechanical technology. The Technology of Direct-Seeding in paddy rice cultivation (TDS), which has rapidly diffused among individual farmers in recent years, may be the same scale-neutral technology as Tong-il HYVs. It may be said that the TDS has been designed to solve the problem that results from the bottlenecks of labour shortage and high labour cost. It is also assumed that the TDS may be the technical innovation that is induced by changes in factor endowments in market economy while Tong-il HYVs may be the technological development that is leaded by the government's incentives to attain self-sufficiency of staple food. In the area of agricultural policy, the study has a crucial role in establishing a desirable direction for agricultural reconstruction-policy for improving agricultural infrastructure and in providing information for the scientific technology-policy for attaining more efficient resource allocation in agricultural research.

양파(Allium cepa L.) 추출물이 Tyrosinase 유전자 발현에 미치는 효과

조남철,윤연희,이혜진,손현정,김양경,최근희,나명석,조영권,이황희,진종언 한국식품영양학회 2001 韓國食品營養學會誌 Vol.14 No.3

Melanin 생성에 관여하는 tyrosinase 유전자의 발현을 억제하는 물질을 탐색하고자 tyrosinase promoter를 지닌 Bl6 mouse melanoma cell해 앙파 methanol 추출물을 처리한 바 양파 methanol 추풀물은 10.0㎍/ml, 100.0 ㎍/ml, 1.0 ㎎/ml의 농도에서 대조군에 비해서 약 15%, 23% 57%의 억제효과를 나타냈으며 세포생존율은 1.0 ㎍/ml, 10.0 ㎍/ml, I00.0 ㎍/ml, 1.0㎎/ml의 농도에서 약 126 %, 92%. 85%, 64%로서 세포독성이 낮게 나타났다. Ethyl acetate, butyl alcohol, 그리고 물 용매 분획물은 tyrosinase 유전자의 발현물 억제하는 효과가 없었지만 methylene chloride 용해 분획물은 10.0 ㎍/ml과 100.0 ㎍/ml의 농도에서 약 37%와 35%의 발현율을 나타냄으로서 대조군에 비해 크게 억제하였다. Onion(Allium cepa L,) extract by methanol repressed the expression of tyrosinase gene of B16 mouse melanoma cell containing tyrosinase promoter. 10.0 ㎍/ml, 100.0 ㎍/ml, 1.0 ㎎/ml of the extract repressed expression of tyrosinase gene about 15%, 23%, and 57%, respectively, compared with control. In the MTT assay, the same extract exhibited low cytotoxicity at 1.0 ㎍/ml, 10.0 ㎍/ml, 100.0 ㎍/ml, and 1.0 ㎎/ml, respectively. The fractions of ethyl acetate, butyl alcohol, and water did not showed the repressive effect on the expression of tyrosinase gene, but the fraction of methylene chloride repressed highly at 10.0 ㎍/ml and 100.0 ㎍/ml.

인천 인현동 호프집 화재 피해자 분석

최정태,안무업,안희철,최영미,정재봉,서정열,유기철,이삼우,박석현,조준휘,김성환,김아진,송근정 대한응급의학회 2001 대한응급의학회지 Vol.12 No.4

Purpose : This study was conducted to develop field triage, transportation, distribution, and prehospital care at a fire disaster by analyzing the victims of the fore that broke out at a bar in Incheon. Method : We analyzed the cases of the victims of a fire in Incheon in Oct. 1999. We determined the primary care hospital, the arrival time, the burn size, the outcome, and the injury type from the medical records, the concerned organ records, and interviews with concerned persons. Result : The total number of victims was 137: 56 prehospital deaths, 1 hospital death, and 80 survivals. The Pearson correlation coefficient between the burn size and the severity was -0.175. There were 121(89.6%) cases of inhalation injury, 59 (43.7%) cases of flame burns, 66 (48.9%) cases of hypoxic brain damage, and 16 (11.9%) cases involving other types of injury. Conclusion : The causes of death of the fire victims were inhalation injury and hypoxic brain damage due to CO poisoning and other toxic inhalants. We propose the use of a simple triage and rapid treatment(START) system and a reassessment the delayed category in fire disasters.

두 광원에 의해서 형성된 그림자식 무아레 무늬의 컴퓨터 채색을 통한 3차원 물체의 형상 재현

육근철,정기주,류지욱,조선미 公州大學校 基礎科學硏究所 1996 自然科學硏究 Vol.5 No.-

위치가 서로 다른 두개의 백색 광원에 의해서 형성된 무아레 무늬를 컴퓨터로 받아들여 소프트웨어 상에서 재구성하고 이들을 채색하여 무아레 무늬 사이의 경계가 뚜렷한 색구조 무아래 무늬를 만든다. 그리고 이렇게 해서 얻은 두 개의 2차원적 무아레 무늬를 합성하여 3차원적 형상으로 재생할수 있는 방법을 구현하고 제안하였다. In this paper. We present and experimently realized the reconstruction of the 3-D image by using two color moire topography painted in computer, we can be effectively removed noise effects originated from background color of objects by using reconstruction techniques in software.

위암환자의 복강내에 투여한 Mitomycin C-Carbon Particle의 Mitomycin 용출에 관한 연구

노승무,조영훈,정경수,오정연,김진향,양준묵,강대영,송규상,조준식,최선웅,이진호,민병무,김용백,김창식,박근성,인현빈,정현용,김학용 충남대학교 의과대학 지역사회의학연구소 1998 충남의대잡지 Vol.25 No.1

Locoregional recurrence is the most common type of recurrence in surgical operation of gastric adenocarcinoma, and peritoneal dissemination is one of the most difficult problems in advanced gastric adenocarcinoma treatment. Because the peritoneal cavity is the most common site of the first recurrence after gastric cancer resection, intraperitoneal chemotherpy seems a logical choice for cancer chemotherapy. The Mitomycin C(MMC) adsorbed by the activated charcoal particles(CH) is relatively released when the drug concentration surrounding the carbon particles becomes low in the peritoneum of the peritoneal cavity. For the intraperitoneal chemotherapy on the advanced gastric adenocarcnoma, mitomycin C adsorbed on activated carbon particles was administered in the peritoneal cavity just before abdominal wall closure. The closed drainage tubes were inserted in the peritoneal cavity and clamped for tuo hours after completion of operation. MMC concentrations were serially measured in peritoneal fluid, plasma and urine at 2hour, 48 hour, 72 hour and 168 hour following its administration in order to study the efficacy of the MMC-CH as a drug delivery system. There were minimal toxicities in born marrow, liver, and gastrointestinal system after intraperitoneal MMC-CH administration. The data of this study suggested that MMC-CH may have a somewhat more beneficial effect than surgery alone when administered in optimal dose and schedules, but the MMC concentration of the peritoneal fluid was not sufficient to eradicate remnant cancer cells, and effective duration of maintenance was only below 24 hours in the peritoneal fluid and plasma.

다형성 교모세포종에서 광범위 전적출술후 단기 재발된 치험 1예

박호권,강중식,조준,문창택,장상근,임정애 건국대학교 의과학연구소 2003 건국의과학학술지 Vol.13 No.-

Glioblasty/ma Multiforme(GBM) is the one of the most common malignant tumors in central nervous system(CNS). The incidence of the tumor is about 12% of all CNS tumors and about 50% of all intracranial tumors. Though the development of the microsurgical technique, radiosurgical technique, and chemotherapy works effectively, complete cure of the GBM has not been achieved. It has been known that the prognosis of GBM depends on the extent of surgical tumor removal, remained tumor volume, radiation dose, and chemotherapy. Not only patient's age but also tumor characteristics such as MRI enhancement, angiogenesis and necrosis are also very important prognostic factors. Authors experienced very aggressive GBM in aged woman, who received gross total tumor removal, but refused other therapeutic motalities postoperatively. Very rapid recurrence of GBM and global cerebral edema in aged woman should be considered fatal. This case demonstrates the effectiveness of aggressive removal and the limited usefulness of neurosurgical tools in GBM recurrence. Authors would suggest that the early diagnostic effort and the verified neurosurgical therapy for malignant tumor are still strongly requested to make better prognosis.

초음파 펄스에코 신호의 3차원 처리

송문호,손상락,조정호,성제중,안형근,장순재 한국비파괴검사학회 2003 한국비파괴검사학회지 Vol.23 No.5

비파괴 시험을 위한 3차원 구조의 초음파 영상에는 다양한 결함을 명백하게 보여줄 수 있을 만큼 상세하고 쉽게 알아볼 수 있는 정보가 제공되어야 한다. 수년 동안 원자력 발전소에서 사용된 금속관에 발견되는 소규모의 균열은 전형적인 결함들인데, 이러한 밀리미터 이하의 균열이나 결함은 최종 3차원 영상에서 묘사되어야만 의미있는 검사가 될 것이다. 향상된 선명도와 그에 따른 결함의 발견 과정의 한 단계로써, 펄스에코(pulse-echo) 초음파를 사용한 3차원 영상제작 기술을 제안한다. 이 기술은 필요한 스캐닝과 펄스에코 데이터의 처리과정을 통한 검사로 3차원 물체의 3차원 영상을 생성하는데, 2차원 위너필터(Wiener filter)에 의해 초음파 빔을 선명하게 하는 기술을 포함한다. 제안하는 위너필터는 빔의 전달에서 펄스에코 데이터를 초음파 빔 방향의 수직방향에 따라 필터링한다. 이 3차윈 처리과정은 결함의 선명성을 증진시키고 사용자에게 3차윈 구조물의 좌우 회전 및 축 회전과 같은 조작 능력을 제공한다. 이러한 조작 능력은 3차원에서 다양한 결함들의 크기와 위치의 분명한 묘사를 가능하게 한다. Infrasonic imaging of 3-D structures for nondestructive evaluation must provide readily recognizable images with enough details to clearly show various flaws that may or may not be present. Typical flaws that need to be detected are miniature cracks, for instance, in metal pipes having aged over years of operation in nuclear power plants; and these sub-millimeter cracks or flaws must be depicted in the final 3-D image for a meaningful evaluation. As a step towards improving conspicuity and thus detection of flaws, we propose a pulse-echo ultrasonic imaging technique to generate various 3-D views of the 3-D object under evaluation through strategic scanning and processing of the pulse-echo data. We employ a 2-D Wiener filter that filters the pulse-echo data along the plane orthogonal to the beam propagation so that ultrasonic beams can be sharpened. This three-dimensional processing and display coupled with 3-D manipulation capabilities by which users are able to pan and rotate the 3-D structure improve conspicuity of flaws. Providing such manipulation operations allow a clear depiction of the size and the location of various flaws in 3-D.

화학공학 전공 학생의 취업을 위한 복합 STC 운영

이명섭,한정태,이근복,김노수,조찬휘 永同大學校 1997 硏究論叢 Vol.3 No.1

우리 영동대학교에서 1998년 이후 지금까지 진행하여 온 특별 주제 학습과정인 STC(Special Topics COurse)프로그램을 기존의 운영틀에서 탈피하여 한층 더 발전시킨 복합STC로 활용하고자 하였으며, 특히 이를 졸업생의 취업 및 진학의 방법으로 최대한 활용하고자 계획·운영하였다. 그 결과 취업 및 진학과 같은 진로 확립은 물론 전공지식의 확대, 자격시험 대비능력의 향상, 학생과 교수간의 유대강화 등과 같은 괄목할 만한 성과를 얻을 수 있었으며, 교수들의 산업체 방문을 통한 산학협동의 계기 마련에도 커다란 성과를 얻었다. We have upgraded the STC(Special Topics Course) program, which has been carried out in our university since 1995, to more structured program so that we could train our chemical engineering students better. This program was geared to help students find better jobs and enter well-recognized graduate schools. Consequently, we had most students successful in job searches as well as entrance exams for graduate school; besides, those who actively participated in our STC program were able to attain better professional knowledge and acquire various professional engineers certificates. On top of that, this program allowed us to build up closer relationships with our students. We also made university-industry cooperation possible through our visits to industries nearby.

기성 콘크리트 파일 두부정리를 위한 자동화 장비의 개발

이정호,김정렬,김영석,조문영,김성근 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.2

During the last few years, the use of prefabricated concrete pile has been gradually increased in many construction sites. Cutting work of the concrete pile is an important task to crush a part of pile head which is compressed with more than 800㎏/㎠, It is usually performed by a crusher and three to four skilled workers. Recent analysis results of the pile cutting work reveal that it frequently makes a lot of cracks which significantly reduce the strength of the pile and is labor-intensive work. The primary objective of this study is to propose conceptual designs for developing an automated pile cutting machine. It is anticipated that the development of the automated pile cutting machine would be able to bring improvements in safety, productivity, quality as well as cost saving.