RCS Numerical Simulation of Stealth Modified Three-Surface Aircraft

Cheng Liangliang,Yue Kuizhi,Xing CuiFang,Yu Dazhao 한국항공우주학회 2016 International Journal of Aeronautical and Space Sc Vol.17 No.1

The RCS characteristics of stealth modified three-surface aircraft are analyzed in this paper. Prototype A is built with CATIA software and the three-dimensional digital models of modified stealth three-surface B and C are also designed based on carrier-based aircraft Su-33; the numerical simulation of RCS characteristics of three-surface aircraft is conducted with RCSAnsys software based on physical optics method and the method of equivalent currents; The following results are obtained by comparative analysis and mathematical statistics: (1) by the use of physical optics method and equivalent electromagnetic current method, the scattering intensity for each part of the model and RCS characteristic of the aircraft can be analyzed efficiently and accurately; (2) compared with model A, the mean RCS value of model B is reduced to 14.1% in forward direction and 48.1% in lateral direction; (3) compared with model A, the mean RCS value of model C decreases to 11.4% in forward direction and 21.6% in lateral direction. The results are expected to provide theoretical basis and technical support to the conceptual design of aircraft and stealth technology research.

Dynamic response of a base-isolated CRLSS with baffle

Cheng, Xuansheng,Liu, Bo,Cao, Liangliang,Yu, Dongpo,Feng, Huan Techno-Press 2018 Structural Engineering and Mechanics, An Int'l Jou Vol.66 No.3

Although a rubber isolation cushion can reduce the dynamic response of a structure itself, it has little influence on the height of a sloshing wave and even may induce magnification action. Vertical baffles are set into a base-isolated Concrete Rectangular Liquid Storage Structure (CRLSS), and baffles are opened as holes to increase the energy dissipation of the damping. Problems of liquid nonlinear motion caused by baffles are described using the Navier-Stokes equation, and the space model of CRLSS is established considering the Fluid-Solid Interaction (FSI) based on the Finite Element Method (FEM). The dynamic response of an isolated CRLSS with various baffles under an earthquake is analyzed, and the results are compared. The results show that when the baffle number is certain, the greater the number of holes in baffles, the worse the damping effects; when a single baffle with holes is set in juxtaposition and double baffles with holes are formed, although some of the dynamic response will slightly increase, the wallboard strain and the height of the sloshing wave evidently decrease. A configuration with fewer holes in the baffles and a greater number of baffles is more helpful to prevent the occurrence of two failure modes: wallboard leakage and excessive sloshing height.

Dynamic response of a base-isolated CRLSS with baffle

Xuansheng Cheng,Bo Liu,Liangliang Cao,Dongpo Yu,Huan Feng 국제구조공학회 2018 Structural Engineering and Mechanics, An Int'l Jou Vol.66 No.3

Although a rubber isolation cushion can reduce the dynamic response of a structure itself, it has little influence on the height of a sloshing wave and even may induce magnification action. Vertical baffles are set into a base-isolated Concrete Rectangular Liquid Storage Structure (CRLSS), and baffles are opened as holes to increase the energy dissipation of the damping. Problems of liquid nonlinear motion caused by baffles are described using the Navier-Stokes equation, and the space model of CRLSS is established considering the Fluid-Solid Interaction (FSI) based on the Finite Element Method (FEM). The dynamic response of an isolated CRLSS with various baffles under an earthquake is analyzed, and the results are compared. The results show that when the baffle number is certain, the greater the number of holes in baffles, the worse the damping effects; when a single baffle with holes is set in juxtaposition and double baffles with holes are formed, although some of the dynamic response will slightly increase, the wallboard strain and the height of the sloshing wave evidently decrease. A configuration with fewer holes in the baffles and a greater number of baffles is more helpful to prevent the occurrence of two failure modes: wallboard leakage and excessive sloshing height.

Lineage conversion of mouse fibroblasts to pancreatic α-cells

Lijian Hui,Liangliang Sun,Beige Jiang,Limei Li,Jin Cen,Xiaotao Chen,Zhaoyun Zhang,Qinghua Wang,Xin Cheng,Yongquan Shi,Lijian Hui 생화학분자생물학회 2017 Experimental and molecular medicine Vol.49 No.-

α-cells, which synthesize glucagon, also support β-cell survival and have the capacity to transdifferentiate into β-cells. However, the role of α-cells in pathological conditions and their putative clinical applications remain elusive due in large part to the lack of mature α-cells. Here, we present a new technique to generate functional α-like cells. α-like cells (iAlpha cells) were generated from mouse fibroblasts by transduction of transcription factors, including Hhex, Foxa3, Gata4, Pdx1 and Pax4, which induce α-cell-specific gene expression and glucagon secretion in response to KCl and Arg stimulation. The cell functions in vivo and in vitro were evaluated. Lineage-specific and functional-related gene expression was tested by realtime PCR, insulin tolerance test (ITT), glucose tolerance test (GTT), Ki67 and glucagon immunohistochemistry analysis were done in iAlpha cells transplanted nude mice. iAlpha cells possess α-cell function in vitro and alter blood glucose levels in vivo. Transplantation of iAlpha cells into nude mice resulted in insulin resistance and increased β-cell proliferation. Taken together, we present a novel strategy to generate functional α-like cells for the purposes of disease modeling and regenerative medicine.

Selectively anchoring Cu(OH)2 and CuO on amine‑modified brookite TiO2 for enhanced CO2 photoreduction

Zhangjing Chen,Liangliang Li,Gang Cheng 한국탄소학회 2023 Carbon Letters Vol.33 No.5

Photocatalytic CO2 reduction is a promising approach for reducing CO2 emissions and achieving the goal of carbon neutrality. In this work, selectively coupling Cu(OH)2 and CuO with amine-modified brookite TiO2 ( NH2–B–TiO2) has been achieved by a simple precipitation method. The results show that CuO is better than Cu(OH)2 as a co-catalyst to enhance the CO2 photoreduction capability of NH2– B–TiO2. The highest rates of CO2 conversion to CH4 and CO of NH2– B–TiO2–CuO composite reach 6.05 and 3.25 μmol h? 1 g? 1, respectively, which is higher than 8 times the yield of CH4 of NH2– B–TiO2. It is proposed that the NH2– B–TiO2–CuO composite offers an effective charge transfer through the formation of a p–n junction between NH2– B–TiO2 and CuO interfaces, while in the NH2– B–TiO2–Cu(OH)2 composite, the Cu(OH)2 dominantly serves as an electron sink to capture photo-induced electrons, promoting photo-induced carrier separation. This work provides an ingenious synthetic method for selectively anchoring Cu(OH)2 and CuO on semiconductors with different charge transfer routes for an efficient CO2 photoreduction.

Low-Rank Representation-Based Image Super-Resolution Reconstruction with Edge-Preserving

( Rui Gao ),( Deqiang Cheng ),( Jie Yao ),( Liangliang Chen ) 한국인터넷정보학회 2020 KSII Transactions on Internet and Information Syst Vol.14 No.9

Low-rank representation methods already achieve many applications in the image reconstruction. However, for high-gradient image patches with rich texture details and strong edge information, it is difficult to find sufficient similar patches. Existing low-rank representation methods usually destroy image critical details and fail to preserve edge structure. In order to promote the performance, a new representation-based image super-resolution reconstruction method is proposed, which combines gradient domain guided image filter with the structure-constrained low-rank representation so as to enhance image details as well as reveal the intrinsic structure of an input image. Firstly, we extract the gradient domain guided filter of each atom in high resolution dictionary in order to acquire high-frequency prior information. Secondly, this prior information is taken as a structure constraint and introduced into the low-rank representation framework to develop a new model so as to maintain the edges of reconstructed image. Thirdly, the approximate optimal solution of the model is solved through alternating direction method of multipliers. After that, experiments are performed and results show that the proposed algorithm has higher performances than conventional state-of-the-art algorithms in both quantitative and qualitative aspects.

Synthesis and electrochemical performance of Li1þxV3O8 as cathode material prepared by citric acid and tartaric acid assisted solegel processes

Miao Shui,Weidong Zheng,Jie Shu,Qingchun Wang,Shan Gao,Dan Xu,Liangliang Cheng,Lin Feng,Yuanlong Ren 한국물리학회 2013 Current Applied Physics Vol.13 No.3

Lithium-ion battery cathode material Li1þxV3O8 is synthesized by a citric acid/tartaric acid assisted sol egel method and sintered at 350 C, 450 C and 550 C for 3 h for the formation of Li1þxV3O8 phase. The synthesized samples were fully characterized by FTIR, TG/DTA, XRD, SEM, EIS and chargeedischarge tests. Li1þxV3O8 material synthesized by tartaric acid assisted route and sintered at 450 C for 3 h shows best electro-chemical performance. It shows a high initial capacity of 249 mAh g1 and still reserves a discharge capacity of 260 mAh g1 after 50 cycles. Moreover, in the case of tartaric assisted products, no capacity decadence is observed in 50 cycles. XRD together with TG/DTA measurements reveal that compared with citric acid assisted products, the adoption of tartaric acid as chelating agent effectively lowers the crystallization temperature of amorphous Li1þxV3O8. Therefore, precursors obtained by tartaric acid route calcinated at 450 C for 3 h exhibit lower crystallinity and smaller grain size, which contributes to the better electrochemical performance of the cathode electrodes. From EIS measurements, the bulk resistance is reduced, which favors the intercalation and de-intercalation of lithium ions while cycling.

Time-domain simulations of transient response in LiFePO4 cathode lithium ion batteries

Xiaoping Xu,Miao Shui,Weidong Zheng,Jie Shu,Lei Hui,Linxia Xu,Liangliang Cheng,Lin Feng,Yuanlong Ren 한국물리학회 2014 Current Applied Physics Vol.14 No.5

The time domain transients of batteries comprised of LiFePO4 cathode material exhibit large nonlinearity with the increasing discharging rates. Hence, the calculated overpotential transients match the experimental determined well only when the discharging current is low enough. The results of electrochemical impedance spectra at different OCV level indicate that the change of the parameters of equivalent circuit or even the circuit architecture are probably responsible for the large discrepancy between the predicted and the measured transient profiles. By taking the change of equivalent circuit model at high discharging current into consideration, we successfully simulate the time domain transients of polarization within the entire discharging current range. Also with the help of circuit analysis, the contribution of the ohmic resistance, charge transfer impedance and solid-state diffusion impedance to total polarization has been differentiated as a function of discharging time.