http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정찬권,나유찬 남서울대학교출판국 2008 남서울대학교 정보통신 논문집 Vol.5 No.1
The capacity of telecommunication networks has been increased substantially to meet the request for tremendous rate of information traffic growth due to the demands for multimedia services. As a result, DWDM technologies are emerging to be a prevailing solution of increasing capacity and to enable optical methods of implementing network functions. With the recent movement toward 50-GHz (0.4 nm) channel spacing in DWDM systems, the need for improved components has spawned several new technologies. One such filter technology is the fiber/slab evanescent coupler. The features of the individual isolated waveguides(i.e. the fiber and the slab) play an important role in the performance of the composite structure(e.g. resonance points, FWHM, tunability). For instance, the ACP's approximately determine the resonance points fo the coupler, and the FWHM si inversely proportional to th difference in the dispersion slope of the individual isolated waveguides. For a practical design, study on the features of the DMS will be a good start, because the performance of the coupler is less sensitive to the fiber parameters than to those the external DMS.
정찬권,김선엽,강영진,Jeoung Chan-gwoun,Kim Sun-youb,Kang Young-jin 한국정보통신학회 2005 한국정보통신학회논문지 Vol.9 No.5
This paper is studied the high-repetition rate optical-pulse stream generation using optical loop mirror coupler. With the recent development of the ultrahigh-speed optical time division multiplexed system, hish-repetition rate optical-pulse stream generation is necessary. This is different from conventional approaches, which use fiber or integrated waveguide delay line circuits. The high-repetition-rate optical-pulse multiplication phenomenon occurs when the optical pulse's spectral width is greater than the transfer bandwidth of the coupler used. From the analysis, the output repetition rate can be controlled by using fiber couplers with different equivalent transfer bandwidths. The pulse separation spacing is controlled by number of cascaded coupler in optical loop mirror coupler scheme. 본 논문은 광섬유 루프 결합기를 이용한 고반복률의 펄스 발생에 대해 연구하였다. 최근 OTDM에서, 고 반복률 광 펄스의 개발이 필요하다. 이것은 광섬유나 집적화된 도파관 지연 선로 회로들 일반적인 접근법과 차이가 있다. 고 반복율 광펄스 다중 현상은 광펄스들의 분리 폭이 사용된 결합기의 전달대역폭보다 더 클 때 발생한다. 분석으로, 출력 반복율은 서로 다른 등가 전송 대역폭인 광섬유 결합기를 이용하여 조절될 수 있다 분리간격은 직렬의 광루프 미러 결합기 수를 조절함으로서 얻을 수 있다.
정찬권,나유찬,Jeoung, Chan-Gwoun,Ra, Yoo-Chan 한국정보통신학회 2007 한국정보통신학회논문지 Vol.11 No.7
최근 광통신 용량은 VoIP, AUdio/Video 스트리밍의 멀티미디어 서비스 수요로 인한 정보통신 용량의 증가에 비례하여 증가하고 있다. 초고속 광통신망에서 추가적인 광섬유망과 고속장비 없이 이를 해결하기 위한 방법으로 DWDM(Dense Wavelength Division Multiplexing) 기법이 대두되고 있다. 따라서, 본 논문에서는 이러한 기능을 갖는 광필터를 설계하기 위하여 광섬유 한쪽의 클래드를 연마하여 다층 슬래브 도파로에 결합시킨 형태의 광섬유/다층 슬래브 결합구조의 광필터를 제안하였다. 제안된 광필터는 $1.5{\mu}m$ 통신창에서 분리간격이 $4.15{\mu}m$일 때 65nm의 편광 독립성, TM 모드와 TE 모드에 대해 중심파장이 각각 ${\lambda}_0=1.54946\;{\mu}m$와 ${\lambda}_0=1.6144\;{\mu}m$일 때 0.1 nm의 FWHM(Full Width at Half Maximun) 특성을 가진다. The recent, a large capacity of communication is required in order to it is in proportion to capacity of information communication increase and to satisfy a demand because of the demand about Internet, a multimedia service of Video of internet protocol(VoIP), Audio/Video steaming. DWDM(Dense Wavelength Division Multiplexing) technique has been emerged as the method of solving it without additional optical fiber network building and hish-speed equipment. Therefore this thesis proposed the optical filter of fiber/multilayer slab coupled structure combining it to multilayer slab waveguide by polishing the cladding of one side of fiber to design the optical filter having these functions. The optical filter proposed as the simulation result satisfies DWDM filter characteristic; 1) when the separation distance between fiber and slab is $4.15{\mu}m$ at the communication window of $1.5{\mu}m$, the polarization independence is 65nm, 2) when the center wavelengths about TM mode and TE mode are each ${\lambda}_0=1.54946\;{\mu}m$ and ${\lambda}_0=1.6144\;{\mu}m$ and, FWHM(Full at Half Maximun) is 0.1nm.
H자형 개구 결합구조를 갖는 PCS 중계기용 마이크로스트립 패치 안테나 설계 및 제작
이중기,정찬권,강영진,Lee, Jung-Gi,Jeoung, Chan-Gwoun,Kang, Young-Jin 한국정보통신학회 2007 한국정보통신학회논문지 Vol.11 No.3
본 논문에서는 개구 결합형 급전구조(aperture coupled feed)를 이용하여 비교적 높은 이득과 광대역 특성을 갖는 마이크로스트립 안테나(Microstrip patch antenna)를 PCS 대역의($1750{\sim}1870$MHz) 중계기용 안테나로 설계 및 제작하였다. 제안된 안테나는 일반 개구결합 안테나의 특성을 개선하기 위해 결합 슬랏을 H자 형태로 변형하였고, 이 H자형 슬랏은 급전과 패치 사이의 결합을 증가시키는 동시에 안테나 뒷단으로 부터의 백로브(back lobe)를 줄여 안테나의 이득을 최대화 시킨다. 제작한 안테나를 측정한 결과 PCS 대역인 $1750{\sim}1870$[MHz]에서 VSWR은 1.5이하였고 이득은 7.5dBi이상이었으며 빔폭은 $80^{\circ}$가 되어 전파 음영 지역이나 빌딩내에서 PCS 이동통신 서비스를 원활히 수행하는데 활용 될 수 있음을 확인하였다. This paper is designed and producted the microstrip patch antenna which used aperture coupled feed structure, and had a comparatively hish gain and headband characteristic with a PCS substitution repeater antenna. The proposed antenna transformed a coupled slot into a H-type in order to improve a characteristic of a general aperture coupled feed antenna. It is this H-type form slot reduces back lobe from the antenna backside at the same time that a coupling between a power feed and patches is iccreased, and to have maximized a gain of an antenna. As a result of having measured the antenna which the VSWR was 1.5 or below and tied up the gain than 7.5dBi in the $1750{\sim}1870$[MHz] that was a PCS substitution, and a beamwidth became in $80^{\circ}$ and radio waves shadow was local, but accomplishment did PCS mobile communication service in building me smoothly, but confirmed what practical use can become.
135kHz 이하 미약 전계강도 무선기기 기술기준 개선 방안 및 제안
김선엽,정찬권,강영진,Kim, Sun-Youb,Jeoung, Chan-Gwoun,Kang, Young-Jin 한국정보통신학회 2010 한국정보통신학회논문지 Vol.14 No.1
본 논문에서는 135kHz 이하 미약 무선국의 전계 강도(기술 기준)에 대한 현재 각국의 동향과 그 기준치를 분석 및 비교를 통하여 해당 대역의 국내기준의 문제점을 분석하였다. 전자파 적합 등록에서 제시하고 있는 각국의 전계 강도 기준치와 연계하여 이에 적합한 국내의 비허가 무선기기(미약 무선기기)의 실질적인 도입 가능한 전계 강도의 기준치를 제시함을 목적으로 한다. 본 논문에서 제시한 전계 강도 허용치를 바탕으로 국내 기준을 상향하면 미약 무선기기 의 보급과 발전에 기여할 것으로 예상되며 국내 통신 시장은 물론 국제 통신 시장에서 경쟁력을 갖출 수 있을 것으로 예상된다. This paper analyzed the problems of the Korean output regulation in the relevant band through an analytic comparison of the current trend of each country and their standard values concerning electric field strength (technical standard) of weak wireless stations with less than 135kHz. In connection with the standard value of electric field strength of each country, which has been proposed in the registration of the appropriate electric wave, the paper aims to propose the standard value of electric field strength that could actually be introduced for suitable unauthorized wireless devices (weak wireless devices) in Korea. Provided that the Korean standard may be upgraded based on the tolerances of electric field strength proposed m this paper, this is expected to be committed to the distribution and advancement of weak wireless devices; and further it is anticipated to be prepared with competitiveness not only in the Korean communications market, but also in the international communications market.