Practical experiences and requirements on workflow

김광훈,장병옥,백수기 경기대학교교육대학원 1997 경기교육논총 Vol.6 No.-

에어로빅 지도자의 직무만족에 관한 연구

이병익,정훈,김진표,이동희 龍仁大學校 人文社會科學硏究所 2002 인문사회논총 Vol.- No.8

This Study attempts to figure out job satisfaction level of aerobic instructors by gender, age and education background. It was carried out on the hypothesis that "there may be difference in the degree of job satisfaction among aerobic instructors by gender, age and education." For this study, a total of 145 instructors (26 males and 119 females), working in Seoul as of 2001, were surveyed In the survey, "Job Diagnostic Survey" that Cho Young-chang translated and revised (1988) was utilized as a questionnaire. Afterwards, Frequency Analysis, t-Test and One-person Variable Analysis methods were adopted to analyze survey results. Based on the aforementioned study procedures and data analyses, the study concluded as follows: First, gender is not a determinant factor of job satisfaction as both gender groups, male and female instructors surveyed, showed high level of job satisfaction. There is not noticeable difference in overall and detailed job satisfaction between the two gender groups. However, in the question of self-achievement evaluation, female groups showed much higher marks. Secondly, age affects job satisfaction level. The instructors in their 30s are found to be more gratified with their job than those in their 20s. In particular, the two age groups demonstrated significant variance in the question of self-achievement evaluation. Thirdly, job contentment level of aerobic instructors varies by educational background. Instructors with highschool education displayed higher level of satisfaction than those with university and graduate school education. However, for question of work environment, compensation, and facilities, those with higher educational background are more content than those with highschool education.

기-액병류상향 충전탑에서 액체체류량과 축방향혼합특성

조지훈,손민일,박용성,함병호,김태옥 明知大學校 産業技術硏究所 1993 産業技術硏究所論文集 Vol.12 No.-

For upward cocurrent gas-liquid flow in a packed column, holdup and axial mixing characteristics of liquid were investigated. In an air-water-glass bead system. liquid holdup and residence time distribution(RTD) were measured and Peclet number based on axial dispersion model was evaluated from experimental RTD. We found that liquid holdup was increased with increasing liquid velocity and size of packing material, and it was decreased with increasing gas velocity. Also, liquid holdup for the cocurrent up flow system was larger than that for the downflow system at the same experimental conditions. As increasing gas velocity, the in fluence of packing size and operation method on liquid holdup was reduced. The calculated Peclet number was not affected by gas velocity, and it was increased with increasing liquid velocity and with decreasing packing size. Furthermore, the effect of liquid velocity on Petlet number for higher liquid Reynolds number(Re1>70) was larger than that for lower Re1. In these conditions, correlations of the dynamic liquid holdup and the Bodenstein number were obtained.

치아종에 대한 증례보고

백병주,김재곤,주훈,양정숙 大韓小兒齒科學會 1995 大韓小兒齒科學會誌 Vol.22 No.2

Odontomas are most common benign odontogenic tumors, and have been defined as "mixed odontogenic tumor composed of epithelial and mesenchymal cells". Many authors are considered to be malformations rather than neoplasm. The etiology of odontoma is uncertain but hypothesized to involve local trauma, infection, inheritance or mutant gene interference with genetic control of tooth development. The recent classification by WHO divides odontoma into 2 groups such as complex odontoma and compound odontoma. Odontomas are usually asymptomatic and are usually discovered on routin dental radiographs. The most frequently encountered symptoms are impacted tooth and swelling. Radiographically, it appears as an irregular mass of calcified material surrounded by a radiolucent band. The possibility of an ameloblastic odontoma must be kept in mind during the differential diagnosis. Surgical excision and histopathological examination of the lesions is recommended. Following removal of the odontoma closing the incision and allowing the tooth to erupt spontaneously was considered. Hitchin suggested that spontaneous eruption may not occur if the root of the impacted tooth is completed. Failure to erupt would require a 2nd surgical exposure to place an orthodontic attachment. This report presents the result in treating patients, whose chief complaint was delayed eruption of teeth due to odontoma.

CAD/CAM 으로 제작된 Ceramic Inlay의 변연누출에 관한 비교연구

조병훈,이명종,임미경,이광원,손호현 大韓齒科保存學會 1997 Restorative Dentistry & Endodontics Vol.22 No.2

To compare the marginal leakage of CAD/CAM-fabricated ceramic inlay, gold inlay and amalgam, forty extracted caries-free premolars were prepared with Class Ⅱ MO cavity design. The teeth were divided into four groups of ten samples each. Group 1 was restored with CAD/CAM-fabricated ceramic inlays cemented with Scotchbond Resin Cement / Scotchbond Multi-purpose plus. Group 2 was restored with gold inlays cemented with Scotchbond Resin Cement / Scotchbond Multi-purpose plus. Group 3 was restored with gold inlays cemented with zinc phosphate cement. And, Group 4 was restored with amalgam. All samples were thermocycled, and stored in 1% methylene blue. Marginal leakage was examined at four margins, that is, occlusal distal, priximal gingival, occlsal facial and occlusal lingual margins from sectioned samples under steeomicroscope(x15). The results were as follows: 1. Group 1 and 2 showed no statistically significant difference among marginal leakage at all four examined margins(p>0.05). 2. Group 3 and 4 showed significant marginal leakage at proximal gingival margin compared with other margins(p<0.05). 3. Significantly increased marginal leakage at priximal gingival, occlusal facial and occlusal lingual margins in group 3 were observed compared with other groups(p<0.05).

유동성 및 응축성 복합레진의 점탄성에 관한 유변학적 연구

조병훈,이인복,권혁춘,손호현,엄정문 대한치과보존학회 2000 Restorative Dentistry & Endodontics Vol.25 No.3

The purpose of this investigation was to observe the viscoelastic properties of five commercial flowable(Aeliteflo, Flow it, Revolution, Tetric flow, Compoglass flow) , three conventional hybrid(Z-100,Z-250,P-60) and two condensable(Synergy compact, SureFil) resin composites. A dynamic oscillatory shear test was done to evaluate the storage shear' modulus (G' ) , loss shear modulus(G") , loss tangent(tan δ) and complex viscosity(η* ) of the resin composites as a function of frequency dynamic frequency sweep test from 0.01 to 100 rad/s at 25℃ - by using Advanced Rheometric Exparusion SystemtARES) . To investigate the effect On the viscosity of resin composites of filler volume fraction, the filler weight % and volume % were measured by means of Archimedes' principle using a pyknometer. The results were as follows 1.The complex viscosity η* of flowable resins was lower than that of hybrid resins and significant differences were observed between brands. The complex viscosity η* of condensable resins was higher than that of hybrid resins. The order of complex viscosity η* at ω = 10 rad/s was as follows. Surefil, Synergy compact, P-60, Z-250, Z-100. Aeliteflo, Tetric flow, Compoglass flow, Flow it, Revolution. The relative complex viscosity of flowable resins compared to Z-100 was 0.04-0.56 but Surefil was 30.4 times higher than that of Z-100. 2.The storage shear modulus G' and the loss shear modulus G" of flowable resins were lower than those of hybrid resins but those of condensable resins were higher. The patterns of the change of loss tangent, tan δ of resin composites with increasing frequency were significantly different between brands.The phase angles,δ, ranged from 30.2-78.1˚at ω = 10 rad/s. 3.A11 composite resins represent pseudoplastic nature with increasing shear rate. 4.The complex shear modulus G* and the phase angle δ was represented by the frequency domain phaser form, G*( ω )= G* eIδ = G*〈 δ. The locus Of frequency domain phaser plots in a complex plane was a valuable method that represent the viscoelastic properties of composite resins. 5.There was no direct linear correlationship but a weak positive relation was observed between filler volume % or weight % and the viscosity of the resin composites.

유치열과 영구치열의 구개 각부의 관계에 대한 연구

이용훈,백병주,양연미,이용희,김상훈,김재곤 大韓小兒齒科學會 2004 大韓小兒齒科學會誌 Vol.31 No.4

본 연구는 유치열과 영구치열에서 구개의 길이, 폭, 깊이 및 치열궁의 형태 등을 조사하여 남녀간의 차이와 유치열과 영구치열간의 변화양상을 파악하는 것이다. 유치열기 아동 100명과 영구치열기 성인 100명 총 200명을 대상으로 하여 상악 석고 모형을 채득하고 3차원 laser scanner(SD Scanner, DS4060, LDI, U.S.A.)를 통한 석고 모델의 측정을 통해 cloud data, polygonization, section curve and loft surface, fit and horizontal plane (Surfacer 10.0, Imageware, U.S.A.)을 기초로 하여 구개의 폭, 길이, 높이 및 치열궁의 형태 등을 계측하였다. 통계학적 분석을 위해 t-tests가 사용되었다. 이에 다음과 같은 결론을 얻었다. 1. 구개의 계측항목에서 유치열 전방부 구개높이를 제외한 나머지 항목에서 남자가 여자보다 크게 나왔으며, 유치열은 전구개폭(p<0.05)과 후구개폭(p<0.01), 영구치열은 구개폭(p<0.05)과 전구개길이(p<0.01), 중구개, 후구개길이(p<0.05)에서 남녀간에 유의한 차이가 있었다. 2. 남녀의 구개지수에서 유치열에서는 구개장고지수(p<0.05)와 구개장폭지수(p<0.01)가 남녀간에 통계학적으로 유의한 차이가 있었다. 영구치열의 구개지수에서는 남녀간에 유의한 차이가 없었다. 3. 유치열과 영구치열의 계측항목 비교에서 후방부 구개폭이 가장 많이 증가하였으며, 다음으로 후방부 구개높이, 전방부 구개폭, 전방부 구개길이 순이었다. 전방부 구개높이와 후방부 구개길이는 오히려 감소하였다. 4. 유치열과 영구치열의 구개지수 비교에서 구개장고지수와 구개장폭지수, 후구개폭고지수는 영구치열에서 증가하였고, 나머지 지수는 감소하였다. The purpose of this study was to clarify the palatal arch length, width and height in the primary and permanent dentition. Samples were consisted of normal occlusions both in the primary dentition(50 males and 50 females) and in the permanent dentition(50 males and 50 females). With their upper plaster casts were used and through 3-dimensional laser scanning(3D Scanner, DS4060, LDI, U.S.A.), cloud data, polygonization, section curve and loft surface, fit and horizontal plane were based to measure the palatal arch length, width and height(Surfacer 10.0, Imageware, U.S.A.). T-tests were applied for the statistical analyze of the data. The results were as follows : 1. In the measurement values, the values of the male were higher than those of the female except primary anterior palatal height. There were not only statistically significant differences in anterior palatal width(p<0.05) and posterior palatal width(p<0.01) in primary dentition but palatal width(p<0.05), anterior palatal length(p<0.01), middle and posterior palatal length(p<0.05) in permanent dentition between male and female. 2. In the indices of palate, there were statistically significant differences in height-length index(p<0.05) and width-length index(p<0.01) between male and female in primary dentition. In permanent dentition, there was statistically difference between male and female. 3. In the measurement values, posterior palatal width was increased most greatly. Posterior palatal height, anterior palatal width and anterior palatal length were followed by descending order. On the other hand, anterior palatal height and posterior palatal length were decreased. 4. In the indices of palate, the height-length index, the width-length index and posterior height-width index were increased, but the others were decreased.

영한/한영사전을 이용한 동의어/유의어 사전 자동 구축

고병일,이태우,서영훈 충북대학교 컴퓨터정보통신 연구소 2004 컴퓨터정보통신연구 Vol.12 No.1

본 논문에서는 한-영사전과 영-한사전의 상호 정보를 이용한 동의어/유의어사전 자동구축에 대해서 기술한다. 유의어/동의어사전은 정보검색분야 뿐만 아니라 의미정보를 요구하는 자연언어처리의 다양한 분야에서 필요로 한다. 기 구축된 한-영사전과 영-한사전 정보들을 이용하여 동의어/유의어 후보목록들을 획득하고, 획득된 후보목록들에 대해서 후보목록에 출현하는 빈도수, 사전의 위치정보, 입력명사정보들을 이용하여 최종적으로 동의어/유의어 목록들을 추출하게 된다. 동의어/유의어 사전 엔트리들은 한-영사전에 수록된 한국어 명사 64,630개를 대상으로 하여 구하였다. 제안한 동의어/유의어사전을 문서 필터링시스템에 적용하여 실험한 결과 종래방식보다 F-score가 약 0.01정도 상승되었다. This paper describes an automatic synonym-dictionary construction method using the mutual information from the Korean-English and English-Korean dictionaries. The synonym-dictionary is an important resource in the information retrieval and the various fields of the natural language processing requiring the semantic knowledge. Synonym candidate list is extracted by the information of pre-existing Korean-English and English-Korean dictionaries. Finally, synonym words are selected from the candidate-list, using its frequency in the candidates-list, the location information in the dictionary, and the given words. the synonym dictionary was constructed from the 64,630 Korean nouns which listed in the Korean-English dictionary. Document-Filtering System with this dictionary shows higher F-score than without it.

기-액병류상향 고정층반응기에서 액체의 흐름과 축방향분산

함병호,조지훈,편무실,김태옥,손민일 明知大學校 産業技術硏究所 1996 産業技術硏究所論文集 Vol.15 No.-

For upward cocurrent gas-liquid flow in a fixed bed reactor, the flow and axial dispersion of liquid were investigated in an air-water-Zeolite particle system. Based on experimental residence time distributions, parameters of mixing models were evaluated with two proposed liquid mixing models: axial dispersion model with stagnant zone(DSM) and plug flow model with stagnant zone(PFM). Accordingly, the applicability and parameters of each mixing model were analyzed for various operating conditions. We found that the flow and axial mixing characteristics of liquid could be analyzed well by DSM and parameters were well estimated by curve fitting using trial and error method. Also, the fraction of stagnant zone was decreased with increasing liquid velocity, while the dimensionless mass transfer coefficient between dynamic and stagnant zones was increased, and these parameters estimated by DSM were lower than those by PFM. In dynamic zone, calculated Peclet number were increased with increasing liquid velocity and axial mixing characteristics of liquid tended to access to plug flow for the high liquid Reynolds number(about Re1>50). For the porous catalyst particle system the flow and axial mixing characteristics of liquid had nearly same tendency that for the nonporous particle(glass bead) system, while dimensionless mass transfer coefficient was lower value than that for it. In these conditions, correlations of these parameters were obtained for various operating conditions.

점적상에서의 수력학 특성

조지훈,성기천,함병호,김태옥 明知大學校 産業技術硏究所 1991 産業技術硏究所論文集 Vol.10 No.-

Hydrodynamics was investigated in a trickle bed with spherical particles. Flow transition boundary, pressure drop, and liquid holdup were measured and analyzed in an air-water system. The results showed that liquid velocity at trickle-pulse transition boundary increased with increasing packing size and it decreased with increasing gas velocity, and that the theoretical model proposed was well applicable to predicted flow transition boundary. In the same operation conditions, flow characteristics was changed with operation mode because of liquid closslinking. Therefore, as the maximum gas velocity increased, pressure drop increased. Also, pressure drop increased with increasing fluid velocity and it increased with decreasing packing size, and the effect of gas velocity on pressure drop for higher liquid velocity was less than that for lower liquid velocity. Liquid holdup increased with increasing liquid velocity and it decreased with increasing packing size, and the influence of gas velocity on liquid holdup for pulse flow regime had larger than that for trickie flow regime. By contrast, the influence of packing size on liquid holdup for pulse flow regime had less that for trickle flow regime. In this conditions, correlations of pressure drop and liquid holdup were proposed in terms of Reynolds numbers of total fluids and liquid phase.