http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Square footing on geocell reinforced cohesionless soils
Biswas, Sefali,Mittal, Satyendra Techno-Press 2017 Geomechanics & engineering Vol.13 No.4
Ground improvement with use of geosynthetic products is globally accepted now. The present paper discusses the improvement in bearing capacity of square footing placed at surface of cohesionless soil reinforced with geocell. Mohr-Coulomb failure criterion has been used in the observations. To study effects of geocell with respect to planar geogrid, model tests were conducted on planar reinforcement also. A comparative study of unreinforced soil and soil reinforced with plane geogrid and geocell has also been made. Numerical analysis results obtained by PLaxis have been compared with those obtained from model tests and were found to be in good agreement. A parametric study revealed the role of length of reinforcement, spacing between layers, placement of reinforcement from top surface etc. on bearing capacity. A design example given in paper illustrates the savings in cost of construction of footing on reinforced sand. The study shows that there is improvement in bearing capacity with respect to unreinforced soil which is of the order of 86%. Similarly settlement reduction is 13.07% for single layer of geocell which for double layers of geocell is 693% and 86.48% respectively. The cost reduction in case of reinforced soil is 35% as compared to unreinforced soil.
Biswas, Tanmay The Kangwon-Kyungki Mathematical Society 2018 한국수학논문집 Vol.26 No.1
The main aim of this paper is to prove some results related to the growth rates of composite entire and meromorphic functions on the basis of their relative (p, q)-th order, relative (p, q)-th lower order, relative (p, q)-th type and relative (p, q)-th weak type where p and q are any two positive integers.
Thermal Evolution of BaO-CuO Flux as Sintering Aid for Proton Conducting Ceramic Fuel Cells
Biswas, Mridula,Hong, Jongsup,Kim, Hyoungchul,Son, Ji-Won,Lee, Jong-Ho,Kim, Byung-Kook,Lee, Hae-Weon,Yoon, Kyung Joong The Korean Ceramic Society 2016 한국세라믹학회지 Vol.53 No.5
The eutectic melt of BaO-CuO flux is known to be a potential sintering aid for $Ba(Zr,Y)O_3$ (BZY) electrolyte for proton-conducting ceramic fuel cells (PCFCs). A density of BZY higher than 97% of theoretical density can be achieved via sintering at $1300^{\circ}C$ for 2 h using a flux composed of 28 mol% BaO and 72 mol% CuO. In the present study, chemical and structural evolution of BaO-CuO flux throughout the sintering process was investigated. An intermediate holding step at $1100^{\circ}C$ leads to formation of various impurity compounds such as $BaCuO_{1.977}$, $Ba_{0.92}Cu_{1.06}O_{2.28}$ and $Cu_{16}O_{14.15}$, which exhibit significantly larger unit cell volumes than the matrix. The presence of such secondary compounds with large lattice mismatch can potentially lead to mechanical failure. On the other hand, direct heating to the final sintering temperature produced CuO and $Cu_2O$ as secondary phases, whose unit cell volumes are close to that of the matrix. Therefore, the final composition of the flux is strongly affected by the thermal history, and a proper sintering schedule should be used to obtain the desired properties of the final product.
Thermal Stability of Phaseolus vulgaris Leucoagglutinin: a Differential Scanning Calorimetry Study
Biswas, Shyamasri,Kayastha, Arvind M. Korean Society for Biochemistry and Molecular Biol 2002 Journal of biochemistry and molecular biology Vol.35 No.5
Phaseolus vulgaris phytohemagglutinin L is a homotetrameric-leucoagglutinating seed lectin. Its three-dimensional structure shows similarity with other members of the legume lectin family. The tetrameric form of this lectin is pH dependent. Gel filtration results showed that the protein exists in its dimeric state at pH 2.5 and as a tetramer at pH 7.2. Contrary to earlier reports on legume lectins that possess canonical dimers, thermal denaturation studies show that the refolding of phytohemagglutinin L at neutral pH is irreversible. Differential scanning calorimetry (DSC) was used to study the denaturation of this lectin as a function of pH that ranged from 2.0 to 3.0. The lectin was found to be extremely thermostable with a transition temperature around $82^{\circ}C$ and above $100^{\circ}C$ at pH 2.5 and 7.2, respectively. The ratio of calorimetric to vant Hoff enthalpy could not be calculated because of its irreversible-folding behavior. However, from the DSC data, it was discovered that the protein remains in its compact-folded state, even at pH 2.3, with the onset of denaturation occurring at $60^{\circ}C$.
Biswas, D K,Dai, S C,Cruz, A,Weiser, B,Graner, E,Pardee, A B National Academy of Sciences 2001 PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF Vol.98 No.18
<P>The effect of a kinase inhibitor Go6796 on growth of epidermal growth factor (EGF)-stimulated estrogen receptor negative (ER-) breast cancer cells in vivo and role of nuclear factor kappa B (NF-kappaB) on tumorogenesis have been investigated. This was studied in an animal model by implanting ER- mouse mammary epithelial tumor cells (CSMLO) in syngeneic A-J mice. (i) Local administration of Go6976 an inhibitor of protein kinases C alpha and beta inhibited growth of tumors and caused extensive necrotic degeneration and regression of the tumors without causing any microscopically detectable damage to the vital organs liver and lung. (ii) Stable expression of dominant-negative mutants of the beta subunit (dnIkkbeta) of the inhibitory kappa B (IkappaB) kinase (dnIkk) that selectively blocked activation of NF-kappaB caused loss of tumorigenic potential of CSMLO cells. Stable expression of dnIkkbeta also blocked phorbol 12-myristate 13-acetate (PMA)-induced activation of NF-kappaB and overexpression of cyclin D1, concomitantly with the loss or reduced tumorigenic potential of these cells. Thus, results from in vivo and in vitro experiments strongly suggest the involvement of NF-kappaB in ER- mammary epithelial cell-mediated tumorigenesis. We propose that blocking NF-kappaB activation not only inhibits cell proliferation, but also antagonizes the antiapoptotic role of this transcription factor in ER- breast cancer cells. Thus, NF-kappaB is a potential target for therapy of EGFR family receptor-overexpressing ER- breast cancers.</P>
Biswas, Arup Kumar,Das, Santanu,Das, Sanjoy The Society for Aerospace System Engineering 2020 International Journal of Aerospace System Engineer Vol.7 No.2
When a rigid wedge is indented in to a semi-infinite block, the material is bulged up around the wedge that is generally called lip. The previous works in this filed considered the outer profile of the lip to be linear. But, present authors observed both experimentally and with the aid of finite element analysis that the profile of the lip is not always linear, and it depends on the angle of the wedge and friction parameters. So, in this work, attempts have been made to calculate hardness of indentation for different wedge angles and friction parameters. As hardness is intrinsic property of material, consideration of either linear or parabolic lip will not be affected much. A comparative study of hardness for linear and parabolic free surface profiles of the piled up material around the cone is analyzed in this work.
SOME GENERALIZED GROWTH PROPERTIES OF COMPOSITE ENTIRE AND MEROMORPHIC FUNCTIONS
Biswas, Tanmay,Biswas, Chinmay The Kangwon-Kyungki Mathematical Society 2021 한국수학논문집 Vol.29 No.1
In this paper we wish to prove some results relating to the growth rates of composite entire and meromorphic functions with their corresponding left and right factors on the basis of their generalized order (, ) and generalized lower order (, ), where and are continuous non-negative functions defined on (-∞, +∞).
Biswas, P. V.,Kim, H. Y.,Ahn, J. H. Springer Science + Business Media 2017 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.31 No.4
<P>Manufacturing a high-pressure sensitive diaphragm type sensor is a complex task. Due to it's complex shape, several parts are designed individually. It involves welding of several parts. As welding involves several parameters it's difficult to control the welding geometry where it is being fused. So it is likely that the physical boundary condition of the welded region will be different from the theoretical boundary conditions. So the change in boundary condition will make the deflection of the diaphragm different. For a precision device, any effect of a change in boundary condition can affect the deflection of the diaphragm largely. Thus, any effect of imperfect welding in a high precision measuring device can hamper the sensitivity of the particular device. A welded diaphragm of steel for a pressure sensor using eddy current sensor to detect it's deflection due to pressure can lose it's effectivity, due to the unpredictable boundary conditions created after the welding. In this paper, we will be trying to find the cause of deviation between the theoretical and experimental results due to the effect of a change in boundary conditions at the welded region.</P>