http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Zarina Tatia Barbosa Vieira Santos,Douglas Rangel Goulart,Eder Alberto Sigua Rodriguez,Leandro Pozzer,Sergio Olate,José,Ricardo Albergaria Barbosa 대한구강악안면외과학회 2017 대한구강악안면외과학회지 Vol.43 No.2
Objectives: The aim of this study was to compare the mechanical resistance of four different osteosyntheses modeled in two different sagittal split ramus osteotomy (SSRO) designs and to determine the linear loading in a universal testing machine. Materials and Methods: An in vitro experiment was conducted with 40 polyurethane hemimandibles. The samples were divided into two groups based on osteotomy design; Group I, right angles between osteotomies and Group II, no right angles between osteotomies. In each group, the hemimandibles were distributed into four subgroups according to the osteosynthesis method, using one 4-hole 2.0 mm conventional or locking plate, with or without one bicortical screw with a length of 12.0 mm (hybrid technique). Each subgroup contained five samples and was subjected to a linear loading test in a universal testing machine. Results: The peak load and peak displacement were compared for statistical significance using PASW Statistics 18.0 (IBM Co., USA). In general, there was no difference between the peak load and peak displacement related to osteotomy design. However, when the subgroups were compared, the osteotomy without right angles offered higher mechanical resistance when one conventional or locking 2.0 mm plate was used. One locking plate with one bicortical screw showed higher mechanical resistance (162.72±42.55 N), and these results were statistically significantly compared to one conventional plate with monocortical screws (P=0.016) and one locking plate with monocortical screws (P=0.012). The difference in peak displacement was not statistically significant based on osteotomy design or internal fixation system configuration. Conclusion: The placement of one bicortical screw in the distal region promoted better stabilization of SSRO. The osteotomy design did not influence the mechanical behavior of SSRO when the hybrid technique was applied.
Recognition of the Y chromosome in Turner syndrome using peripheral blood or oral mucosa tissue
Barbosa Lene Garcia,Siviero-Miachon Adriana Aparecida,Souza Maria Anunciação,Spinola-Castro Angela Maria 대한소아내분비학회 2021 Annals of Pediatirc Endocrinology & Metabolism Vol.26 No.4
Purpose: Turner syndrome is defined as total or partial loss of the second sex chromosome in a phenotypically female patient. Due to the possibility of hidden mosaicism of fragments of the Y chromosome and development of gonadoblastoma, we evaluated the presence of such fragments in 2 tissues with different embryonic origins, peripheral blood lymphocytes (mesoderm), and oral mucosal cells (ectoderm) using multiplex polymerase chain reaction.Methods: DNA samples were collected from 109 patients, and primers for the SRY, TSPY, and AMELX genes were used.Results: We found 14 patients (12.8%) with positive molecular markers for the Y chromosome. The study of tissues of different embryological origin showed the same degree of agreement, sensitivity, and specificity.Conclusion: Oral mucosa cells have a simpler method of collection that is less invasive and requires less time for DNA extraction at a lower cost.
Barbosa Carolina Meneghin,Scatolin Renata Siqueira,Vieira-Junior Waldemir Francisco,Tanaka Marcia Hiromi,Ferraz Laura Nobre 대한치과보존학회 2023 Restorative Dentistry & Endodontics Vol.48 No.3
Objective This in vitro study aimed to evaluate the effects of different whitening toothpastes on a composite resin during at-home bleaching with 10% carbamide peroxide. Materials and Methods Sixty samples (7 mm × 2 mm) were used for color and roughness analyses, while another 60 samples (3 mm × 2 mm) were utilized to assess microhardness. The factors analyzed included toothpaste, for which 5 options with varying active agents were tested (distilled water; conventional toothpaste; whitening toothpaste with abrasive agents; whitening toothpaste with abrasive and chemical agents; and whitening toothpaste with abrasive, chemical, and bleaching agents). Brushing and application of whitening gel were performed for 14 days. Surface microhardness (SMH), surface roughness (Ra), and color (∆L*, ∆a*, ∆b, ∆E*ab, and ∆E00) were analyzed. The Ra and SMH data were analyzed using mixed generalized linear models for repeated measures, while the color results were assessed using the Kruskal-Wallis and Dunn tests. Results Between the initial and final time points, all groups demonstrated significant increases in Ra and reductions in SMH. No significant differences were found between groups for SMH at the final time point, at which all groups differed from the distilled water group. Conventional toothpaste exhibited the lowest Ra, while whitening toothpaste with abrasive agent had the highest value. No significant differences were observed in ∆L*, ∆a*, and ∆b. Conclusions While toothpaste composition did not affect the color stability and microhardness of resin composite, combining toothbrushing with whitening toothpaste and at-home bleaching enhanced the change in Ra. Objective This in vitro study aimed to evaluate the effects of different whitening toothpastes on a composite resin during at-home bleaching with 10% carbamide peroxide. Materials and Methods Sixty samples (7 mm × 2 mm) were used for color and roughness analyses, while another 60 samples (3 mm × 2 mm) were utilized to assess microhardness. The factors analyzed included toothpaste, for which 5 options with varying active agents were tested (distilled water; conventional toothpaste; whitening toothpaste with abrasive agents; whitening toothpaste with abrasive and chemical agents; and whitening toothpaste with abrasive, chemical, and bleaching agents). Brushing and application of whitening gel were performed for 14 days. Surface microhardness (SMH), surface roughness (Ra), and color (∆L*, ∆a*, ∆b, ∆E*ab, and ∆E00) were analyzed. The Ra and SMH data were analyzed using mixed generalized linear models for repeated measures, while the color results were assessed using the Kruskal-Wallis and Dunn tests. Results Between the initial and final time points, all groups demonstrated significant increases in Ra and reductions in SMH. No significant differences were found between groups for SMH at the final time point, at which all groups differed from the distilled water group. Conventional toothpaste exhibited the lowest Ra, while whitening toothpaste with abrasive agent had the highest value. No significant differences were observed in ∆L*, ∆a*, and ∆b. Conclusions While toothpaste composition did not affect the color stability and microhardness of resin composite, combining toothbrushing with whitening toothpaste and at-home bleaching enhanced the change in Ra.
Cannabaceae comparative analysis based on plastid genome evolution
Barbosa D’Oliveira Matielo Cristiane,Fernando Metz Geferson,Plá Matielo Lemos Rafael,de Carvalho Victoria Filipe,de Oliveira Camargo Flávio Anastácio,Marcos Stefenon Valdir 한국작물학회 2024 Journal of crop science and biotechnology Vol.27 No.1
Marijuana or hemp (Cannabis sativa L.) of the Cannabaceae family represents one of the most economically important crops within the group that comprises about 170 plant species, some of which are widely used in industry. It is the most consumed, cultivated, and trafficked illicit drug globally, having several hybrids and varieties resulting from crosses, making the distinctions between Cannabis species almost meaningless. In a former study, our research group sequenced and released two cpDNA from Cannabis apprehended by Brazilian Federal Police which we compare with all deposited Cannabaceae complete cpDNA in this work. In countries where planting, marketing, or consumption is prohibited, it is difficult for control and inspection bodies to identify the origin of different strains. Based on this problem, we aim to perform a comparative genomic analysis of the plastid DNA of the Cannabaceae family. We have found evidence that the ndhA intron seems to be an informative region for phylogenetic and evolutive studies in Cannabaceae family. With the results of the present work, we were able to establish the phylogenetic relationships for the Cannabaceae family using the plastid genomes of 35 accessions, between species, subspecies, varieties, and hybrids.
An overview of the gut side of the SARS-CoV-2 infection
( Bruna Barbosa Da Luz ),( Natalia Mulinari Turin De Oliveira ),( Isabella Wzorek França Dos Santos ),( Luana Zampieron Paza ),( Lara Luisa Valerio De Mello Braga ),( Fernanda Da Silva Platner ),( Mar 대한장연구학회 2021 Intestinal Research Vol.19 No.4
In late 2019, an outbreak of pneumonia caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) initiated in Wuhan, Hubei province, China. The major clinical symptoms described for coronavirus disease (COVID-19) include respira-tory distress and pneumonia in severe cases, and some patients may experience gastrointestinal impairments. In accordance, viral RNA or live infectious virus have been detected in feces of patients with COVID-19. Binding of SARS-CoV-2 to the angio-tensin-converting enzyme 2 (ACE2) is a vital pathway for the virus entry into human cells, including those of the respiratory mucosa, esophageal epithelium as well as the absorptive enterocytes from ileum and colon. The interaction between SARS- CoV-2 and ACE2 receptor may decrease the receptor expression and disrupt the function of B0AT1 transporter influencing the diarrhea observed in COVID-19 patients. In this context, a fecal-oral transmission route has been considered and points out a role for the digestive tract in disease transmission and severity. Here, in order to further understand the impact of COVID-19 in human physiology, the cellular and molecular mechanisms of SARS-CoV-2 infection and disease severity are discussed in the context of gastrointestinal disturbances. (Intest Res 2021;19:379-385)
Henrique Barbosa de Freitas,Karina Márcia Ribeiro de Souza Nascimento,Charles Kiefer,Gilson Alexandre Gomes,Tiago Tedeschi dos Santos,Elis Regina Moraes Garcia,Thiago Rodrigues da Silva,Luanna Lopes P 아세아·태평양축산학회 2019 Animal Bioscience Vol.32 No.5
Objective: This study was conducted to assess increasing doses of phytase added to broiler diets formulated with different levels of available phosphorus (avP), calcium (Ca), and sodium (Na), and the respective effects on performance parameters, quantitative carcass characteristics, ash and phosphorus deposition in tibia and weight of organs. Methods: Three different matrices were assumed for phytase with the following nutritional values: matrix A (MT A): 0.165% Ca, 0.150% avP, and 0.035% Na; matrix B (MT B): 0.215% Ca, 0.195% avP, and 0.045% Na; matrix C (MT C): 0.245% Ca, 0.225% avP, and 0.053% Na. There were six different diets: No phytase (formulated to meet the nutritional requirements); phytase 500 FTU/kg+MT A; phytase 1,000 FTU/kg+MT A; phytase 1,500 FTU/kg+MT A; phytase 1,000 FTU/kg+MT B and phytase 1,500 FTU/kg+MT C. Results: There was no significant phytase influence on performance, quantitative carcass characteristics, ash and phosphorus deposition in tibia and weight of the organ throughout the study period, however, it was possible to observe a tendency of improvement in body weight corrected feed conversion for broilers fed the phytase 1,500+MT C diet, where potentially these birds were more efficient on utilize phytic phosphorus and other nutrients bounded to phytate molecule, translating into improvement in performance, and there was also a non significant numerical improvement in body weight corrected feed conversion of broilers fed this diet. Conclusion: Broilers fed with diets formulated with different levels of avP, Ca, and Na and increasing doses of phytase have shown no change on performance, quantitative carcass characteristics, ash and phosphorus deposition in tibia and weight of organs.