Special Issues - 전기자동차 보급과 충전인프라 구축

한승호,Han, Seung-Ho 대한전기협회 2010 전기저널 Vol.- No.402

음성 특성을 이용한 G.711 패킷 손실 은닉 알고리즘의 성능개선

한승호,김진술,이현우,류원,한민수,Han Seung-Ho,Kim Jin-Sul,Lee Hyun-Woo,Ryu Won,Hahn Min-Soo 대한음성학회 2006 말소리 Vol.57 No.-

Because a packet loss brings about degradation of speech quality, VoIP speech coders have PLC (Packet Loss Concealment) mechanism. G.711, which is a mandatory VoIP speech coder, also has the PLC algorithm based on pitch period replication. However, it is not robust to burst losses. Thus, we propose two methods to improve the performance of the original PLC algorithm in G.711. One adaptively utilizes voiced/unvoiced information of adjacent good frames regarding to the current lost frame. The other is based on adaptive gain control according to energy variation across the frames. We evaluate the performance of the proposed PLC algorithm by measuring a PESQ value under different random and burst packet loss simulating conditions. It is shown from the experiments that the performance of the proposed PLC algorithm outperforms that of PLC employed in ITU-T Recommendation G.711.

고장력 강판 부분용입 맞대기 용접부의 피로균열진전수명 평가

한승호,신병천,이웅,최전호,Han, Seung-Ho,Shin, Byung-Chun,Lee, Woong,Choi, Jeon-Ho 대한용접접합학회 2003 대한용접·접합학회지 Vol.21 No.1

Fatigue behaviour of partially penetrated butt-welded joints in high strength steel plates, in which crack-like structural defect, i.e. lack of penetration(LOP), is inevitably introduced during welding processes, was investigated. Fatigue lives of two types of welded joints, namely X-grooved and K-grooved joints, were experimentally determined first. Observed fatigue crack propagation behaviours of the partially penetrated butt-welds were interpreted through considering 3-dimensional semi-elliptical crack shape in front of the LOP. Based on such interpretation, a fracture mechanical method to estimate stress intensity factors at the crack tip was proposed. Since the fatigue lift of the partially penetrated butt-welds was strongly influenced by the ratio of size of the LOP to thickness, D/t, the D/t was used as a main parameter to calculate the fatigue lift by using the proposed method. Comparison of the fatigue lift obtained experimentally and analytically agreed well with each other. Hence it is suggested that the method used in this work to predict fatigue lift of the partially penetrated butt-welds can be applied to real cases with improved lift-prediction capability.

블완전용입 맞대기 용접재의 용입깊이에 따른 피로강도특성 및 잔류수명의 산출

한승호,한정우,신병천,Han, Seung Ho,Han, Jeong Woo,Shin, Byung Chun 한국강구조학회 1998 韓國鋼構造學會 論文集 Vol.10 No.3

본 연구에서는 기존의 강교에서 흔하게 발견되고 있는 맞대기 용접부의 용입불량으로 인한 부재의 피로강도 저하도를 정량적으로 평가하고자 하였다. 이를 위하여 강교량의 재료로 널리 사용되고 있는 SWS490강으로 제작된 완전용입 및 용입깊이가 서로 다른 불완전용입 맞대기 용접시험편을 대상으로 일정진폭하중시험을 수행하여 S-N선도를 산출하고 이를 비교 검토하였으며, 파괴역학적 방법을 이용하여 불완전용입 용접재의 피로수명을 계산하였다. 본 연구의 결과로서, 완전용입 용접재의 경우 AASHTO의 피로강도등급선도와의 비교에서 피로한도값은 A등급보다 높은 값을 보였고, S-N선도의 기울기는 5.57로 매우 높게 나타났다. 불완전용입 용접재의 경우 불완전용입깊이 D가 증가함에 따라 피로강도가 감소하는데, D=14.7mm인 경우 AASHTO의 E'등급보다 낮게 나타난다. 불완전용입 용접재의 파손거동에서 피로균열은 내부 용접루트 선단부에서 a/c가 매우 작은 반타원형 표면균열의 형태로 발생하고, 시험체의 두께방향으로 진전하여 최종파손을 유발한다. 파괴역학적 방법을 이용한 불완전용입 용접재의 피로수명을 평가하기 위하여 3차원 반타원형 균열형상에 대한 응력확대계수 K를 유한요소해석으로 구하였다. 여기서 얻어진 K값과 실험으로 얻어진 Paris식의 상수를 이용하여 불완전용입 용접재의 피로수명을 계산하여 비교하였다. 그리고 실제 불완전용입 맞대기용접부의 파손으로 붕괴사고가 발생한 성수대교의 수직재에 본 연구결과를 적용하여 피로수명을 계산해 보았다. In this paper fatigue strength reduction of butt weld with penetration defect, which can be seen frequently in the steel bridge, was assessed quantitatively. S-N curves were derived and investigated through the constant amplitude fatigue test of fully or partially penetrated welded specimen made of SWS490 steel. The fracture mechanical method was applied in order to calculate the remaining fatigue life of the partially penetrated butt welds. The fatigue limit of the fully penetrated butt welds was higher than that of category A in AASHTO's fatigue design curves, and the slope of S-N curves with 5.57 was stiffer than that of other result for welded part generally accepted as 3. The fatigue strength of the partially Penetrated butt weld was strongly influenced by the size of lack of penetration, D. It decreased drastically with increasing D from 3.9 to 14.7mm. Fracture behaviour of the partially penetrated butt weld is able to be explained obviously from the beach mark test that a semi-elliptical surface crack with small a/c ratio initiates at a internal weld root and propagates through the weld metal. To estimate the fatigue life of the partially penetrated butt weld with fracture mechanics, stress intensity factors K of 3-dimensional semi-elliptical crack were calculated by appling finite elements method and fracture mechanics parameters such as C and m were derived through the fatigue test of CT-specimen. As a result, the fatigue lives obtained by using the fracture mechanical method agreed well with the experimental results. The results were applied to Sung-Su bridge collapsed due to penetration defects in butt weld of vertical member.

저수형 잔디블록 저수조 내 충진재료에 따른 저수량 및 초종별 증발산량

한승호,최준수,양근모,양병이,강진형,김원태,Han, Seung-Ho,Choi, Joon-Soo,Yang, Geun-Mo,Yang, Byoung-E,Kang, Jin-Hyoung,Kim, Won-Tae 한국조경학회 2006 韓國造景學會誌 Vol.34 No.5

The purpose of this study was to investigate the performance of porous grass block. For the investigation, Festuca arundinacea and Zoysia japonica 'Zenith' were planted, and the volume of evapotranspiration and remains were examined based on different materials in the water tank in the experiment of Festuca arundinacea, the volume of water storage of treatment with perlite ($10.84{\iota}/m^2$) was higher than that with drainage ($7l/m^2$). The difference between the two was $3.84/m^2$. The drainage treatment without water storage capacity showed the higher degree of dryness in turf grass. The volume of evapo-transpiration of treatment with perlite was the highest (21.57mm/week). The volume of evapotranspiration of treatment with sand was 19.57mm/week, and with treatment with drainage was 18.24mm/week. Based on the measured volume of daily evapotranspiration of $2.60{\sim}3.08mm\;d^{-1}$, it was determined that the unit with water storage capacity would store water of one to two days usage compared to unite without such storage capacity. In the experiment of Zoysia japonica 'Zenith', the volume of water storage of treatment with perlite was $10.77l/m^2$ which was similar to the former experiment. The volume of evapotranspiration of treatment with perlite and sand were 21.64mm/week and 20.64mm/week, respectively. In case of airtight water tank, the volume was measured as 22.06mm/week. Each treatment has no notable difference in the volume of evapotranspiration. In conclusion, from the investigation in this study, porous grass block with water tank was found to be effective in plant growth under low irrigation. As the ecological area ratio and vegetated porous pavement have became more emphasized, additional study of rain infiltration and reservoir effect are needed in the future.

투수성 잔디블록 포장 하부 토양의 물리성

한승호,김원태,강진형,Han, Seung-Ho,Kim, Won-Tae,Kang, Jin-Hyoung 한국조경학회 2006 韓國造景學會誌 Vol.34 No.4

Impervious pavement is primary contributor to the malfunctioning of the urban water circulation system. The aim of this research is to provide basic information and data for new pavement materials and paving technology which could enhance the urban water circulation system. For the study purposes, physical properties of soils sampled from 16 stations were analyzed. The sampling spots were paved with grass block porous pavement material. The findings from the analysis are as follows. The hardness of soils under the pavement was $17{\sim}22mm$ for thoroughfare and $6{\sim}32mm$ for parking areas. The bulk density was $1.42{\sim}1.81g/cm^{3}$ for thoroughfare and $1.38{\sim}1.75g/cm^{3}$ for parking area. The solid phase ration was $46.9{\sim}62.5m^{3}/m^{3}$ for thoroughfare and $45.6{\sim}61.3m^{3}/m^{3}$ for parking area. The porosity was $37.5{\sim}53.1m^{3}/m^{3}$ for thoroughfare and $38.7{\sim}54.4m^{3}/m^{3}$ for parking area. The saturated hydraulic conductivity was $8{\sim}164mm/hr$ for thoroughfare and $14{\sim}201mm/hr$ for parking area. The saturated hydraulic conductivity of the H sample area (the area was completed three months ago) and that of the other area were compared. There was up to 80% decreases of the saturated hydraulic conductivity within one year after the completion of pavement. After the first year, decrease in the saturated hydraulic conductivity was modest. Also there are changes in both surface and under soil physical properties of the grass block porous pavement depending on compaction. The extent of change depends on the degree of compaction. All these factors are combined to influence the permeability of the soil under the pavements. The results of this suggest that it is required to develop a new pavement technology which ensures both the durability and porosity of the pavement to improve the water circulation system by applying Ecological Area Rate.

에너지 하베스팅 응용을 위한 압전 세라믹 파이버-폴리머 복합소재의 연구 동향

한승호,강형원,이우성,박성대,백동수,Han, Seung-Ho,Gang, Hyeong-Won,Lee, U-Seong,Park, Seong-Dae,Baek, Dong-Su 한국전기전자재료학회 2010 전기전자재료 Vol.23 No.9

기간시설물의 구조안전기술

한승호,Han, Seung-Ho 재료연구소 1998 機械와 材料 Vol.10 No.4

논단 3 - 하천 수변녹지 및 생태벨트 조성기술 개발

한승호,조용현,Han, Seung-Ho,Jo, Yong-Hyeon 한국하천협회 2009 하천과 문화 Vol.5 No.4

유류오염 토양/지하수 정화를 위해 개발된 DSB(Deep-Site Biopile) System 현장적용특성

한승호,공성호,강정우,Han Seung-Ho,Kong Sung-Ho,Kang Jung-Woo 한국지하수토양환경학회 2005 지하수토양환경 Vol.10 No.2

본 논문은 유류로 오염된 부지를 DSB(Deep-site Biopile) system을 이용하여 정화함으로써 적용 가능한 현장특성을 평가하기 위한 것이다. 오염부지는 유류가 유출되어 깊이 약 2.5 m 부근에 위치하는 지하수의 흐름에 띠라 광범위하게 오염(총 $7,201m^3$) 되어 있었으며, 투수성이 좋은 Sand층으로 구성되어 있다. 부지 내 설치된 배관은 각 지점마다 독립적으로 제어될 수 있도록 하였으며, DSB system의 가동은 24시간을 기준으로 30분 가동/30분 정지되도록 하였다. 오염부지 내 오염원이 저감되는 현황을 파악하기 위하여 DSB system 가동시간에 따른 시료채취 작업을 수행한 결과, DSB system 가동 후 약 30여일 만에 총석유계탄화수소 및 BTEX 오염원이 약 50% 이상 저감되었으며 약 165일이 경과한 후에는 토양오염 확인기준 이하로 저감되어 정화작업이 정상적으로 완료되었다. 이와 같이 본 DSB system은 기존에 적용되어 왔던 생물학적 공법들과는 달리 높은 농도의 유류화합물로 오염되어 있는 토양 및 지하수를 약 6개월의 단기간에 효과적으로 처리할 수 있었으며 정화 system을 지상이 아닌 지중에 설치함으로써 별도의 부지가 확보되지 않은 경우에도 적용할 수 있는 특성이 있음을 알 수 있었다. The aim of this article is to assess the application characteristics of the site by remediating oil-contaminated area using DSB (Deep-site Biopile) system. In the contaminated area, the soil was composed of penetrable sand and the leaked oil was spread widely (total 7,201 cubic meters) through 2.5 meter deep underground water flow. DSB system was operated for 30 minutes intervals for 24 hours in a day (30 minutes opεration and 30 minutes stop). To check contamination level change in the contaminated area after DSB system was operated, samples were taken. The result from the site shows that BTEX/TPH contamination level was dropped 50% after 30-day operation of DSB system, and that contamination level was dropped below contamination level check standard after 165 days and the remediation was completed. Unlike traditional biological remediation methods DSB system could efficiently process soil and water which were contaminated by high levels of oil compounds.