RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        토양의 함수율에 따른 전기비저항 반응 모형 실험 연구

        지윤수 ( Yoon Soo Ji ),오석훈 ( Seok Hoon Oh ),이희순 ( Heui Soon Lee ) 한국지구물리·물리탐사학회 2013 지구물리와 물리탐사 Vol.16 No.2

        지반조사에서 비파괴 조사 기술은 시추조사보다 경제적으로 비용이 덜 들고 광역에 걸친 지반정보를 제공하는장점이 있다. 하지만 지반설계정수로서 적용하기에는 어려운 한정된 정보만을 제공하게 된다. 이를 극복하기 위해, 비파괴 조사 방법 중 하나인 전기비저항 탐사를 모형토조실험에 적용하여, 토질상태에 따른 비저항 반응과 함수비에 따른 비저항 반응을 분석하여 비저항 거동 양상에 대한 연구를 수행하였다. 실험에 사용한 토질은 주문진 표준사, 마사토이며 각토질의 입도 분포, 균등계수를 구하여 실험에 있어 실험재료의 균질한 상태를 유지하였다. 실험에 사용한 모형의 제원은160×100×50 (cm)의 아크릴 재질 토조이며, 각 토질의 높이는 30 cm를 유지하였다. 5TE(함수비측정센서)센서를 7~8cm 간격으로 수직하게 꽂아 층별 함수비를 측정하였다. 모형실험 결과 주문진 표준사는 비저항 거동 양상이 함수비에 민감하게 반응하는 것을 알 수 있었으며, 마사토는 함수비에 따라 비저항이 낮아진 후에도 시간경과에 따른 거동 양상에큰 변화가 없는 것을 관찰하였다. 또한 토조 실험에 사용된 토양과 유사한 테스트 베드를 선정하여 그 반응을 비교 분석하였다. 이러한 실험을 통해 토질 상태와 함수비에 따른 다양한 비저항 거동 양상 자료를 수집하고, 비파괴 조사기술의 정확도를 향상 시켜 나간다면 지반설계정수를 산정하는데 있어 기초적인 연구가 될 수 있음을 확인하였다. Geophysical investigation in non-destructive testing is economically less expensive than boring testing and providing geotechnical information over wide-area. But, it provides only limited geotechnical information, which is hardly used to the design. Accordingly, we performed electrical resistivity experiments on large scale of soil model to analyze the correlation between electrical resistivity response and soil water contents. The soils used in the experiments were the Jumunjin standard sand and weathered granite soil. Each soil particle size distribution and coefficient of uniformity of experimental material obtained in the experiments were maintained in a state of the homogeneous. The specifications of the model used in this study is 160×100×50(cm) of acrylic, and each soil was maintained at the height 30 cm. The water content were measured using the 5TE sensors (water contents sensors) which is installed 7~8 cm apart vertically by plugging to floor. The results of the resistivity behavior pattern for Jumunjin standard sand was found to be sensitive to the water content, while the weathered granite soil was showing lower resistivity over the time, and there was no significant change in behavior pattern observed. So, it results that the Jumunjin standard sand`s particle current conduction was better than the weathered granite soil`s particle through contact with the distilled water. This lab test was also compared with the result of a test bed site composed of similar weathered soil. It was confirmed that these experiments were underlying research of non-destructive investigation techniques to improve the accuracy to estimate the geotechnical parameter.

      • KCI등재

        전기비저항 모니터링 자료를 이용한 연약지반 평가를 위한 역산기법 적용

        지윤수 ( Yoon Soo Ji ),오석훈 ( Seok Hoon Oh ),임은상 ( Eun Sang Im ) 한국지구물리·물리탐사학회 2014 지구물리와 물리탐사 Vol.17 No.2

        간척지의 연약지반 평가를 위해 전기비저항 모니터링을 실시하여 물리탐사기법의 적용성을 알아보고자 총 3개월에 걸쳐 전기비저항 모니터링 자료를 획득하였고, 이 자료들을 독립역산, 시간경과 역산, 4D 역산법으로 해석을 실시하였다. 본 연구에서는 각 역산 방법들의 비교를 통해 연약지반의 변화 특성을 잘 나타낼 수 있는 역산방법을 파악하고자 하였다. 또한, 시추자료와 콘 관입시험(Cone Penetration Test; CPT) 자료를 이용하여 각 역산방법들이 기반암과 연약지반을 명확히 구분 하는지 알아보았다. 시간경과 역산의 경우 독립역산 보다 역산 잡음이 감소하여 연약지반을 잘 반영한다는 것을 알 수 있었다. 4D 역산은 3개월 데이터 보다 장기의 데이터를 사용하면 시간경과 역산법보다 효율적인 해석방법이 될 수 있음을 파악하였다. 연약지반에서의 전기비저항 모니터링은 지반의 시공간적 전기적 상태를 연속적으로 분석 할 수 있는 유용한 방법임을 확인하였다. Electric resistivity monitoring was applied to evaluate the soft ground in reclaimed land in order to figure out the applicability of physical prospecting. For this, electrical resistivity monitoring data were acquired for total three months and analyzed those data with independent inversion, time-lapse inversion, and 4D inversion methods. The result was compared for various inversion methods so as to figure out what showed the soft soil most properly. Moreover, drilling and CPT(Cone Penetration Test) data were also used in order to find out if each of those inversion methods could distinguish either bed rock or the soft soil clearly. And according to the result, time-lapse inversion showed less inversion artifacts than independent inversion, so it could indicate the soft soil better. If data gained for a longer period than three months are used, 4D inversion has been found to be a more efficient analysis method than the time-lapse inversion method. Electrical resistivity monitoring on the soft soil has been found to be a useful method that can analyze the spatio-temporal electric state of the ground serially.

      • KCI등재

        석회석 광산지역 지반침하 분석을 위한 물리탐사 기술 적용 연구

        홍진표 ( Jin Pyo Hong ),지윤수 ( Yoon Soo Ji ),오석훈 ( Seok Hoon Oh ),최성웅 ( Sung Oong Choi ) 한국지구물리·물리탐사학회 2015 지구물리와 물리탐사 Vol.18 No.4

        지반침하가 발생한 두 곳의 석회석 광산 지역에서 전기비저항 탐사를 수행하여 침하 원인과 향후 위험지역을 추정하고자 하였으며, 해석의 한계성을 극복하기 위해 암반공학적 해석을 수행하여 광산 개발과의 연계성을 검토하고자 하였다. 연구지역은 점토와 모래질 토층의 석회석 광산 인근 지대(연구지역 1)와 석회석 광산과의 연관성이 예측되는 채굴적 상부 지대(연구지역 2)를 대상으로 하였다. 연구지역 1, 2의 2차원 전기비저항 탐사 결과, 침하 발생 위치 하부에서 각각 70 ~ 120 ohm-m, 20 ~ 50 ohm-m의 상대적으로 저비저항 이상대가 확인되었다. 연구지역 1은 2차원 전기비저항단면을 파악하여 3차원 역산 해석을 통해 지반침하의 가능성을 확인하였다. 연구지역 2는 침하가 발생하고 이상대가 관찰된 측선 7번에 대하여 암반공학적 안정성 해석을 실시하고, 침하의 원인과 향후 침하 발생 가능성을 확인하였다. Electrical resistivity surveys were conducted at two subsidence areas near and at limestone mine sites, respectively, in order to estimate their causes of subsidence and the regions of potential occurrence. In addition, the linkages of mine development with these subsidences were investigated by the rock engineering analysis. Two study areas have different geological setting. One study site is the land subsidence area, which contains clay and sandy soil near the limestone mine, The other study site is the land subsidence area located just above the mine, which is expected to be relevant to the limestone mine. As results of two-dimensional (2D) electrical resistivity surveys at the sites 1 and 2, low resistivity zones, which are 70 ~ 120 ohm-m and 20 ~ 50 ohm-m, respectively, were found under the subsidence zones. For the study site 1, the possibility of subsidence was confirmed by using three-dimensional (3D) inversion performed with 2D resistivity profiles. For the study site 2, the cause of the subsidence and the possibility of subsidence occurrence were confirmed by rock engineering computation with regard to measurement line 7 in which low resistivity accompanied by subsidence area was observed.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼