RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
        • 주제분류
        • 발행연도
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • SCOPUSKCI등재

        습식 배연탈황공정에서 DBA 부산물의 영향

        이형근,조항대,김인원 한국화학공학회 2001 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.39 No.6

        국내 산업체에 설치된 배연탈황공정의 효율적이고 안정적인 운전을 위하여 첨가제의 물리화학적 특성, 첨가제의 반응 메커니즘 등을 살펴보고 bench 규모의 실험장치를 이용하여 국내 산업체에서 부산물로 발생한 첨가제의 성능을 측정하기 위한 실험을 수행하였다. 실험 조건하에서 DBA 첨가제 주입농도가 증가함에 따라 SO_2 제거효율의 증가를 보였으며, L/G Ratio가 8.0 이상인 조건에서 DBA 농도가 1,200ppm인 경우에는 pH 또는 SO_2 농도에 관계없이 SO_2 제거효율은 99.8% 이상을 보였다. 또한 첨가제를 사용할 경우에 pH가 낮은 영역에서 사용하는 것이 높은 영역에서 사용하는 것보다 그 효과가 상승되었으며, 액상 내에서 완충작용을 하게 되어 액체막 저항을 감소시키는 효과를 보였다. 실험결과에서 pH, L/G, DBA농도를 이용하여 SO_2 제거효율을 예측하기 위한 경험적 모델식을 제시하였다. To enhance the performance of the flue gas desulfurization process using Dibasic Acids(DBA) additive, physicochemical properties and reaction mechanism were studied and the performance of the DBA additive, produced from a domestic industrial company as byproduct, was experimentally investigated using a bench scale system. The increase of SO_2 removal efficiency was observed as the increasing of DBA concentration in the experimental conditions. SO_2 removal efficiency at DBA concentration of 1,200 ppm and L/G ratio of 8.6 was showed more than 99.8% regardless of pH and inlet SO_2 concentration. SO_2 removal efficiency was higher in the lower pH region than the higher region, and liquid film resistance was decreased due to the buffering effect of additive in the solution. Empirical equations were obtained to predict the SO_2 removal efficiency depend on pH, L/G ratio and concentration of DBA additive using the experimental data.

      • SCOPUSKCI등재

        배가스에서 SO2 와 NO의 동시제거를 위한 첨가제의 성능

        김성현,이형근,조항대 한국화학공학회 1994 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.32 No.3

        배가스중의 SO₂및 NO를 제거하기 위해 bubbling 형태의 반응기에서 첨가제로 황인을 사용하여 NO제거효율 및 황인의 이용도에 영향을 주는 교반속도, 유입가스의 유량, 산소의 주입농도, 황인의 첨가농도와 유입가스의 농도 등을 변화시켜 실험을 수행하였다. 특히 유입 NO가스의 농도변화가 큰 경우에 대해서도 좋은 결과를 보여 배출농도가 다양한 공정에서도 황인첨가에 의한 NO제거의 가능성을 볼 수 있었다. 황인이 용액내에서 산소와의 반응에 의해 생성된 액적을 gas washing bottle을 이용하여 인산의 형태로 98%이상 부산물로 회수할 수 있음을 보였다. 석회석과 황인을 이용하여 SO₂와 NO 동시제거실험에서 모두 98%이상 동시제거 가능함을 보였으며, 용액의 pH는 2.5-3.0정도를 유지하였다. A bubbling type reactor for simultaneous removal of SO₂/NO was built to test the performance of yellow phosphorous and limestone. Factors affecting NO removal efficiency and phosphorous utilization in this system such as mixing degree, flow rate of flue gas, P₄ concentration, concentration of NO and O₂ in the flue gas were investigated. This method showed good results for NO removal efficiency of phosphorous emulsions over wide range of NO concentrations. It means that this method can be applied for treatment of NO emission from other sources. White fume produced by reaction of P₄ and O₂ in the reactor can be recovered above 98% as phosphoric acid and phosphorous acid using a washing column. Using P₄ and limestone, both SO₂ and NO in the flue gas can be removed above 98%, and pH of solutions were maintained in the level of 2.5-3.0.

      • SCOPUSKCI등재

        Mg(OH)2 를 이용한 습식배연탈황공정에서 흡수탑의 특성

        박영수,이형근,조항대,최병문,윤혜식 한국화학공학회 2000 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.38 No.5

        수산화마그네슘을 이용하여 산업체의 보일러에서 발생하는 연소가스를 처리하는 배연탈황공정을 개발하기 위하여 bench 규모의 실험장치를 이용하여 여러 형태의 흡수탑의 특성과 성능에 관한 실험을 수행하였다. 흡수탑의 종류에 따라 기상물 질전달계수(k_Ga) 값을 기상 Reynolds number 21,000-33,000과 액상 Reynolds number 950-2,400 범위에서 경험적 상관관계식을 얻었다. Dual Flow Tray(DFT)를 설치한 흡수탑에서 SO₃ 농도가 0.2-0.3wt% 정도로 낮은 경우에는 L/G ratio의 변화에 따라 SO₂제거효율이 크게 변화함을 보여 주지만, SO₃ 농도가 0.7wt% 이상인 조건에서는 L/G ratio나 SO₃ 농도가 증가하여도 별 영향을 받지 않았다. DFT의 hole 상부에 일정한 각도의 plate가 붙어 있는 Cycloid Dual Flow Tray (CDFT)는 DFT에 비해 성능이 다소 높지만 각도에 따라 흡수탑내의 압력차의 변화가 컸다. CDFT#3, CDFT#4를 이용한 경우에 비교적 낮은 압력을 유지하면서도 SO₂ 제거효율이 95% 정도를 유지할 수 있었다. To develope the flue gas desulfurization process using magnesium hydroxide, which is used in industries to treat the flue gas from boilers, the performance of different types of gas-liquid contactors was experimentally investigated using a bench scale system. Emperical correlations for the gas phase mass transfer coefficient(k_Ga) was determined at gas-phase Reynolds numbers from 21,000 to 33,000 and liquid-phase Reynolds numbers from 950 to 2,400. SO₂removal efficiency obtained at the Dual Flow Tray(DPT) was varied by L/G ratio when S03 concentration was 0.2-0.3 wt%, but was not affected by L/G ratio and SO₃ concentration when SO₃ concentration was more than 0.7 wt%. Not only was the performance of Cycloid Dual Flow Tray(CDFT) which has an inclined plate above each plate hole higher than DPT but the pressure drop was larger. 95% SO₂ removal efficiency was obtained using CDFT#3, CDFT#4 with a mild pressure drop.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼