http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정승훈,Jung, Seunghun 한국교통대학교 융복합기술연구소 2020 융ㆍ복합기술연구소 논문집 Vol.10 No.1
Automotive battery system consists of various components such as battery cells, mechanical structures, cooling system, and control system. Recently, various computational technologies are required to develop an automotive battery system. Physics-based cell modeling is used for designing a new battery cell by conducting optimization of material selection and composition in electrodes. Structural analysis plays an important role in designing a protective system of battery system from mechanical shock and vibration. Thermal modeling is used in development of thermal management system to maintain the temperature of battery cells in safe range. Finally, vehicle simulation is conducted to validate the performance of electric vehicle with the developed battery system.
C#을 이용한 XML과 관계형 데이터베이스 매핑 모듈 개발
정승훈 ( Seung-hoon Jung ),고재진 ( Jaejin Koh ),권순덕 ( Sundeok Kwon ),안형근 ( Hyoungkeun Ahn ),양상석 ( Sangseok Yang ) 한국정보처리학회 2004 한국정보처리학회 학술대회논문집 Vol.11 No.2
인터넷의 사용 증가로 정보의 양은 기하급수적으로 증가하고 있으며 웹 데이터의 표준인 XML의 데이터 표현의 유연성으로 인해 EDMS(Electronic Document Management Syste), ebXML(e-businesseXtensible Markup Language)등 웹 기반의 전자문서를 이용하는 XML를 문서 교환 및 표준 문서 형식으로 도입하고 있는 실정이다. 이런 XML문서들을 저장관리 하기 위해 XML전용 Database도 현재 많이 연구되고 있다. 하지만 이런 XML전용 Database들은 관계형 데이터베이스보다 실용성이 떨어지는 점들이 많아 XML과 관계형 데이터베이스 매핑에 대한 연구도 활발히 진행중이다. 본 논문에서는C#을 이용하여 XML과 관계형 데이터베이스 간의 매핑을 위한 모듈을 개발하였으며, XML의 element와 관계형 데이터베이스의 필드를 상호 매핑시켜 줌으로 인해 XML문서의 element를 정확하게 저장, 관리 할 수 있다.
자동차용 연료전지 시스템의 가습모델과 열/물균형 유지방법
정승훈(Jung, Seung-Hun),윤석호(Yoon, Seok-Ho),김민수(Kim, Min-Soo) 한국신재생에너지학회 2005 한국신재생에너지학회 학술대회논문집 Vol.2005 No.06
A PEMFC system model for FCEV was constructed and simulated numerically to examine the heat/water flow of the system and air/fuel humidification process for various operation conditions (ambient pressure /temperature/humidity, operating temperature, power load). We modeled PEMFC stack which can generate maximum electricity of about 80 kW. This stack consists of 400 unit cells and each unit cell has 250cm² reacting area. Uniform current density and uniform operating voltage per each cell was assumed. The results show the flow characteristics of heat and water at each component of PEMFC system in macro-scale. The capacity shortage of the radiator occurred when the ambient was hot (over;40?C) and power level was high (over 50 kW). In spite of some heat release by evaporation of water in stack, heat unbalance reached to 20kW approximately in such a severe operating condition. This heat unbalance could be recovered by auxiliary radiators or high speed cooling fan with additional cost. In cold environment, the capacity of radiator exceeded the net heat generation to be released, which may cause a problem to drop the operating temperature of stack. We dealt with this problem by regulating mass flow rate of coolant and radiator fan speed. Finally, water balance was not easily broken when we retrieved condensed and/or unused water.
기체투과도가 다른 포장재로 포장한 ‘엘리오트’ 블루베리와 ‘설향’ 딸기의 냉장 저장 중 품질 변화
정승훈(Seung Hun Jung),강지훈(Ji Hoon Kang),박승종(Seung Jong Park),성기현(Ki Hyun Seong),송경빈(Kyung Bin Song) 한국식품영양과학회 2014 한국식품영양과학회지 Vol.43 No.6
블루베리 및 딸기의 품질유지를 위한 MAP의 활용 가능성을 확인하고자 비가열 병합 처리 세척과정을 거친 ‘엘리오트’ 블루베리와 ‘설향’ 딸기 시료를 기체투과도가 다른 polyolefin film(6,000 mL O2/m2·24 hr·atm at 24°C)과 PA/PA/PE film(60 mL O2/m2·24 hr·atm at 24°C)에 각각 포장한 후 4°C에 저장하면서 품질 변화를 측정하였다. 수확 후 블루베리와 딸기에 병합 세척처리를 한 결과, 총 호기성균은 각각 2.50, 1.97 log CFU/g, 효모 및 곰팡이에서는 각각 1.95, 2.18 log CFU/g의 감균 효과를 얻어 우수한 살균 효과를 나타내었다. 또한 PA/PA/PE film 포장에 의한 낮은 기체투과도로 인한 높은 이산화탄소 농도 환경에서 미생물의 생육이 저장 중 억제되는 것을 확인하였고, 중량 감소율에 있어서도 높은 기체투과도를 갖는 polyolefin film으로 포장한 처리구보다 낮은 감소율을 보여, 소포장된 블루베리와 딸기의 경우 기체투과도가 낮은 포장재를 이용하는 것이 효율적인 것으로 나타났다. 따라서 본 연구 결과, 수확 후 블루베리 및 딸기의 적절한 기체 조성을 위한 포장재의 선택은 품질 유지 및 유통기한 증대에 도움을 줄 것으로 판단된다. Blueberries and strawberries are highly perishable and easily contaminated with microorganisms. To maintain the quality of these commodities during refrigerated storage, the effects of two packaging materials as well as passive modified atmosphere packaging on the quality of blueberries and strawberries were investigated. The harvested blueberries and strawberries were first treated with combined non-thermal treatment of aqueous chlorine dioxide and fumaric acid, followed by packaging with polyolefin film (6,000 mL O2/m2?24 hr?atm at 24°C) and polyamide/polyamide/ polyethylene film (PA/PA/PE, 60 mL O2/m2?24 hr?atm at 24°C), respectively. After combined sanitizer treatment, the populations of total aerobic bacteria in blueberries and strawberries were reduced by 2.50 and 1.97 log CFU/g while those of yeast and molds were reduced by 1.95 and 2.18 log CFU/g, respectively, compared with the control. In particular, microbial growth in these samples packed with PA/PA/PE film was reduced during refrigerated storage. In addition, the blueberries and strawberries packed with PA/PA/PE film underwent lower weight loss than those packed with polyolefin film during storage. These results suggest that appropriate packaging with proper gas permeability is necessary to maintain the quality of blueberries and strawberries during refrigerated storage.