http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
생물학적 질소제거시 운전조건의 변화가 N<sub>2</sub>O 발생에 미치는 영향
장현섭,김태형,이명주,황선진,Jang, Hyun-Sup,Kim, Tae-Hyeong,Lee, Myoung-Joo,Hwang, Sun-Jin 대한상하수도학회 2009 상하수도학회지 Vol.23 No.5
The objectives of this research were focused on the effects of various operating parameters on nitrous oxide emission such as C/N ratio, ammonia concentration and HRT in the hybrid and suspension reactors. With the decreasing of C/N ratios, $N_2O$ emission rates in the both processes were increased because organic carbon source for denitrification was depleted. In case of biofilm reactor operated using medium, $N_2O$ release from the nitrification was not affected by the variation of ammonia concentration. But in the suspension reactor, $N_2O$ production from the nitrification was rapidly increased with the increase of ammonia. Nitrite accumulation caused by undesirable nitrification conditions could be a important reason for the increase in the $N_2O$ production from the aerobic reactor. And rapid increase in $N_2O$ production was reflected by the decrease of HRT, similar to the results observed in the results of ammonia loading changes. So it could be said that it is very important to put in consideration both its optimum conditions for wastewater treatment efficiency and suitable conditions for $N_2O$ diminish, simultaneously, in order to development an eco-friendly and advanced wastewater treatment, especially in BNR process.
계면활성제 미생물반응기의(혼합 VOCs) 생분해 Ⅱ : 미생물의 군집해석
장현섭(Jang Hyun Sup),신승규(Shin Shoung Kyu),송지현(Song Ji Hyeon),황선진(Hwang Sun Jin) 대한토목학회 2006 대한토목학회논문집 B Vol.26 No.6B
Toluene을 유일 탄소원으로 배양한 혼합미생물 군으로부터 순수미생물을 분리배양한 후, 염기서열을 분석하여 Pseudomonas sp. TDB4 균주를 얻었다. 이 균주의 VOC 분해능을 평가하기 위해 toluene, benzene, p-xylene, styrene을 대상기질로 하여 회분식 생분해실험을 진행하였으며, 단일 기질인 경우 toluene, benzene, styrene, p-xylene의 순으로 분해능이 좋은 것으로 나타났다. 또한 VOCs 혼합물을 주입하였을 경우에는 모든 조합조건에서 styrene, toluene, benzene, p?xylene의 순서로 쉽게 분해하였다. 이러한 결과로부터 VOC가 공존할 경우 toluene과 p-xylene은 다른 VOC의 분해를 촉진 시키지만 styrene은 저해물질로 작용함을 알 수 있었다. 한편 연속식 계면활성제 미생물 반응기(Bioactive Foam Reactor, BFR)에 혼합미생물 배양액과 TDB4 배양액을 접종하고 장기 운전하면서 운전특성과 미생물 동적변화를 확인하였다. VOCs 혼합물질 유입농도가 250 ppm 이상에서는 처리효율이 급격히 저하되었는데, FISH 분석 결과에 따르면 동일한 시점에서 TDB4가 차지하는 비율이 전체 미생물의 20% 미만으로 감소하여 BFR의 처리효율과 미생물상은 매우 밀접한 관련이 있음을 알 수 있었다. 본 연구 결과 FISH 분석법을 계면활성제 미생물 반응기의 미생물 군집변화 해석에 유용하게 시용할 수 있음을 확인하였으며, 미생물 반응조를 장기간 운전할 때에는 안정적인 처리효율을 유지하기 위하여 주기적인 식종을 해주는 것이 적절하다고 판단된다. A toluene-degrading bacterial strain was isolated from a mixed culture that was maintained using toluene as a sole carbon and energy source. The isolated bacterium was classified as Pseudomonas sp. TBD4 based on the close relationship to bacteria belonging to this genus. A bottle study to determine biodegradation rates of individual aromatic compounds showed that the biodegradation was faster in the order of toluene, benzene, styrene, and p-xylene. However, when various mixtures were subjected to TDB4, styrene was degraded at the highest rate, indicating that both toluene and p-xylene could stimulate the degradation of other substrates whereas styrene played as an inhibitor. In addition, the mixed culture and TDB4 were inoculated to the bioactive foam reactor (BFR), and the reactor performance and the corresponding change of microbial community were monitored using the fluorescent in situ hybridization (FISH) method. When an inlet concentration of the VOC mixture increased to greater than 250 ppm, the overall removal efficiency dropped significantly. The FISH measurement demonstrated that the ratio of TDB4 to the total bacteria also decreased to less than 20% along with the decline in removal efficiency in the BFR. As a result, the periodic addition of the pre-grown TDB4 might have been beneficial to achieve a stable performance in the BFR operated over an extended period.
장현섭(Hyun seop Jang),금기섭(Gi sup Geum),권도욱(Do wook Kwon),김종관(Jong kwan Kim),이영훈(Young hoon Lee),박선홍(Sun hong Park),김성규(Seong kyu Kim),배홍용(Hong yong Bhae) 한국신뢰성학회 2014 한국신뢰성학회 학술대회논문집 Vol.2014 No.5
오늘날의 차량 시스템은 전자부품의 비중이 커지고 안전에 대한 중요성이 더욱 부각됨에 따라, 완성차 업체들의 ISO26262 안전규격 준수에 대한 요구가 증가하고 있다. 그러나 규격 충족을 위해서는 제품 설계는 물론 검증과 평가 등의 전 과정에 걸쳐 세계 최고 수준의 기술이 요구된다. 본 논문은 전장 부품 하드웨어에 적용되는 ISO26262규격의 실질적 적용에 대한 것으로, 전자식 조향 보조 장치의 전자 제어 유닛을 그 대상으로 분석을 진행하였다. 하드웨어의 설계와 관련된 V-cycle 의 Key activity 인 PMHF 를 정량적이고 객관적으로 수행하고, 이 결과를 바탕으로 해당 제품이 HARA분석에서 정의한 ASIL을 만족하는지 검증할 수 있다. 또한 FMEDA 시, Component 의 고장모드에 해당하는 Diagnostic measure 를 정의하고 SPFM과 LFM을 계산하면서 회로 설계상의 오류를 검증할 수도 있다. 이를 통해 불필요한 설계를 제거할 수 있으므로 비용상의 이점도 취할 수 있다. 이러한 방법을 모든 차량 전장품 설계에 적용한다면, 안전 규격 만족과 동시에 설계의 물적/시간적 낭비를 막는 데에도 도움을 줄 수 있다.