http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
The Quality of Korean Dried Noodle made from Australian Wheats
이현덕,이철호,Lee, Hyun-Duck,Lee, Cherl-Ho Korean Society of Food Science and Technology 1985 한국식품과학회지 Vol.17 No.3
Korean dried noodles were prepared from 6 different types of Australian wheats and tested for their cooking property and sensory quality. The flours from different wheat types were characterized by the fractionation of starch and gluten. The flow property of fractionated starch and flour suspensions were determined. The protein content of flour influenced many aspects of dried noodle quality. The Cooking rate decreased as the protein content increased. The higher protein content resulted in the higher of shear extrusion force, and lower grade of appearence of cooked noodle. The flours containing about 10% protein, i.e. Australian standard White flours, were appeared to be most adequate to make Korean dried noodle. 여섯 종류의 호주산 밀을 이용하여 한국 재래식 건조 밀국수를 제조하여 조리특성과 관능적 품질을 비교 평가 하였다. 밀가루의 성질을 구체적으로 파악하기 위하여 글루텐과 전분으로 분획하여 전분의 유동특성을 규명하였다. 국수의 품질은 사용한 밀가루의 단백질 함량에 크게 영향을 받았으며 단백질 함량이 높을수록 국수를 삶는데 필요한 시간이 길어졌으며 삶은 국수의 층밀림 압축력이 커지며 외관은 불량하여 졌다. 단백질 함량이 10% 수준의 중력분을 나타내는 Western Australian wheat과 South Australian wheat가 한국 재래식 건조 밀국수의 제조에 가장 적당하였다.
새로운 구조의 pMOS 삽입형 TIGBT의 전기적 특성 분석
이현덕(Lee, Hyun-Duck),원종일(Won, Jong-Il),양일석(Yang, Yil-Suk),구용서(Koo, Yong-Seo) 한국전기전자학회 2010 전기전자학회논문지 Vol.14 No.1
본 논문에서는 기존 TIGBT의 구조적 한계로 인한 순방향 전압강하와 스위칭 손실간의 트레이드-오프 관계를 극복하고, 좀 더 우수한 전기적 특성을 갖는 새로운 구조의 pMOS 삽입형 트렌치 TIGBT를 제안하였다. 제안된 구조는 TIGBT소자의 셀(Cell)과 셀 사이에 존재하는 폴리(poly) 게이트 영역에 pMOS를 형성시킨 구조로 n-드리프트 층으로의 전자, 정공의 주입효율을 증가시켜 기존 구조보다 더 낮은 온-저항과 빠른 스위칭 손실을 얻도록 설계된 구조이다. 시뮬레이션 결과 제안된 구조의 단일 소자인 경우 순방향 전압강하와 스위칭 특성은 각각 1.67V와 3.1us로, 기존 구조가 갖는 2.25V와 3.4us비해 각각 약 25%의 감소된 순방향 전압강하와 약 9% 감소된 스위칭 특성을 보였다. In this paper, we proposed the novel TIGBT with an additional p-type MOS structure to achieve the improved trade-off between turn-off and on-state voltage drop(Vce(sat)). These low on-resistance and the fast switching characteristics of the proposed TIGBT are caused by an enhanced electron current injection efficiency which is caused by additional p-type MOS structure. In the simulation result, the proposed TIGBT has the lower on state voltage of 1.67V and the shorter turn-off time of 3.1us than those of the conventional TIGBT(2.25V, 3.4us).
U-Army의 VoIPv6 망 성능 시뮬레이션을 이용한 망 설계 방안
이현덕(Hyun-Duck Lee),민상원(Sang-Won Min) 한국통신학회 2008 韓國通信學會論文誌 Vol.33 No.10B
본 논문에서는 군의 요구사항을 고려하여 군 통신망의 서비스와 관련 파라미터들을 연구하고, u-Army 실험망을 시뮬레이션을 통해 성능 측정을 하였다. 이를 바탕으로 전 군에 VoIP를 적용할 수 있는 VoIP 설계 가이드라인을 제시하였다. 측정은 패킷과 콜 시그널링 관점에서 지연과 손실에 관하여 몇 가지 시나리오데 대해 측정하였다. 첫 번째는 독립적인 네트워크 서비스에 따라 만족하는 요구사항을 측정하였다. 두 번째는 통합 서비스에서 지연과 손실에 관하여 백그라운드 트래픽을 증가시키면서 그 결과를 측정하였다. 마지막으로 시뮬레이션에 근거하여 IP PBX 장비의 설치 위치에 따라 네트워크의 구성을 분류하여 설계 가이드라인을 제시하였으며, 현재 군의 고정된 링크의 상황에 맞추어 VoIP 단말기의 수를 정할 수 있도록 계산 방법을 제시하였다. In this paper, we consider the military requirement, study the military network services and their related traffic parameters, evaluate the performance the experimental army network, and then suggest the design guideline of applying VoIP to the whole military. We evaluate the performance of the delay and loss in the viewpoint of packet and call levels for the several scenarios. First, the performances of separate network service were considered and the satisfaction of the requirement was obtained. Secondly, the delays and losses of the integrated network services were calculated as the amount of the background traffic increases. Finally, based on the simulation results, we presented the design guideline which classified network configurations for applying VoIP equipment and helped estimate the number of VoIP terminals in the existing link.