http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이재형,한성준,이엄지,이정은,남성욱,하나연,김진성,Lee, Jae-hyung,Han, Seong-jun,Lee, Eom-jee,Lee, Jung-eun,Nam, Seong-uk,Ha, Na-yeon,Kim, Jin-sung 대한한방내과학회 2016 大韓韓方內科學會誌 Vol.37 No.5
Hypoglossal nerve palsy is an uncommon neurologic disorder. We report a 67-year-old Korean male with tongue paralysis due to hypoglossal nerve palsy. He had complaints associated only with tongue paralysis and was treated with herbal medicine and electric acupuncture for 12 days. We evaluated his tongue paralysis severity by a numeric rating scale (NRS) and the angle of tongue deviation. After 12 days of treatment, the NRS score showed improvement of his complaints, and the angle of tongue deviation was decreased. Korean medicine could therefore be an effective treatment choice for hypoglossal nerve palsy.
이재형,신승윤,이한,양석빈,장은영,류재인,이진용,문지회,Lee, Jae-Hyung,Shin, Seung-Yun,Lee, Han,Yang, Seok Bin,Jang, Eun-Young,Ryu, Jae-In,Lee, Jin-Yong,Moon, Ji-Hoi The Microbiological Society of Korea 2019 미생물학회지 Vol.55 No.1
본 논문에서는 한국인 만성 치주염 환자의 치은연하치태에서 분리된 Veillonella atypica KHUD-V1의 유전체 서열을 보고한다. 다른 V. atypica 균주와 달리, KHUD-V1에서는 프로 파지 및 이와 관련된 것으로 추정되는 여러 병독성 인자가 확인되었다. V. atypica KHUD-V1 균주 및 이 균주의 유전체 서열정보는 Veillonella의 유전체 다양성을 진화론적 관점에서 이해하고, V. atypica의 병독성 및 유전적 다양성에 기여하는 프로파지의 역할을 연구하는데 유용할 것이다. Here we report the genome sequence of Veillonella atypica strain KHUD-V1 isolated from subgingival dental plaque of Korean chronic periodontitis patients. Unlike other V. atypica strains, KHUD-V1 carries two prophage regions and prophage remnants, as well as several genes homologous to prophage-associated virulence factors, such as virulence-associated protein E, a Clp protease, and a toxin-antitoxin system. The isolate and its genome sequence obtained here will aid to understand the diversity of the genome architecture of Veillonella within an evolutionary framework and the role of prophages that contribute to the genetic diversity as well as the virulence of V. atypica.
이재형,송인영,국지연,Lee, Jae-Hyoung,Song, In-Young,Kook, Jee-Youn 대한물리치료과학회 1997 대한물리치료과학회지 Vol.4 No.2
The purpose of this study was to determine the efficacy of electrode placement on procaine iontophoresis. Thirty-three healthy students with an age range of 19 to 34 years, were participated in this study. The subjects were randomly assigned into 3 groups. Each subjects received iontophoresis on the proximal 1/3 of volar surface of dominant forearm with soft cotton pad($3.5{\times}3.5cm$) soaked in 2 ml of 4% procaine hydrochloride (pH 5.1) at 4 mA for 10 minutes(total current 40 mA min) of anodal DC. In transversal electrode placement(TEP) group, dispersive electrode was placed on the proximal 1/3 of dorsal surface of the forearm. In longitudinal electrode placement (LEP) group and control group, dispersive electrode were placed on the distal 1/3 of volar surface of the forearm. After procaine iontophoresis, duration of anesthesia were evaluated at five minutes intervals on five random locations in the iontophoretically area using a 21-gauge sterile hypodermic needle pressed with 1 mm invagination until return the sharp pin-pricking pain sensation. The data were ana lysed with one-way ANOVA to determine signific~nt differences between groups. The results showed significantly differences in the local anesthetic duration between the 3 groups(p<0.001). The anesthetic durations of TEP group and LEP group were significantly longer when compared with control group(p<0.05). Anesthetic durations of TEP group and LEP group were not significantly difference, but anesthetic duration of LEP group tends to longer than TEP group. In view of these results, clinicians should consider the electrode placement method when performing the iontophoresis.
CdZnS/CdTe 이종접합의 커패시턴스-전압 특성에 관한 연구
이재형,Lee, Jae-Hyeong 한국정보통신학회 2011 한국정보통신학회논문지 Vol.15 No.6
본 연구에서는 CdZnS와 CdTe로 구성되는 이종접합 소자를 제작하고 커패시턴스-전압 특성을 조사하였다. CdS/CdTe 접합의 경우, 역방향 바이어스가 증가함에 따라 공핍층의 폭이 커져 커패시턴스 값이 약간 감소하였으나 CdZnS/CdTe 접합에서는 CdTe 박막 내에서의 공핍층 폭이 바이어스에 크게 영향을 받지 않아 커패시턴스 값이 역방향 바이어스에 따라 거의 변화가 없었다. 바이어스 전압을 인가하지 않은 상태에서의 공핍층 폭은 높은 CdZnS 박막의 비저항 및 낮은 캐리어 농도로 인해 CdS/CdTe 접합보다 CdZnS/CdTe 접합에서 보다 큰 값을 나타내었다. CdZnS/CdTe 태양전지의 개방전압은 Zn의 비율이 커짐에 따라 CdZnS 박막과 CdTe 박막의 전자 친화력 차이의 감소로 인하여 크게 증가하였으나, Zn 비율이 0.35 이상인 경우 오히려 감소함을 알 수 있었다. 또한 CdZnS 박막의 높은 비저항이 태양전지의 직렬저항을 상승시켜 전지의 변환 효율은 오히려 감소함을 알 수 있었다. In this work, we fabricated the CdZnS/CdTe heterojunction and investigated the C-V characteristics to determine the depletion width and the charge density distribution. A parallel experiment on CdS/CdTe heterojunction was also carried out for comparison. The depletion region width, for CdZnS/CdTe heterojunction, was nearly constant, regardless of bias voltage. However, the depletion region was wider than that of CdS/CdTe heterojunction due to high resistivity of CdZnS film. The interface charge density of CdZnS/CdTe heterojunction was increased linearly with the bias voltage and showed lower values than those for CdS/CdTe junction. The open circuit voltage of CdZnS/CdTe heterojunction solar cells increased with zinc mole ratio due to reducing of the electron affinity difference between CdZnS and CdTe films. However, the increase of series resistance due to the high resistivity of Cd1-xZnxS films results in reducing conversion efficiency.
분말 타겟을 이용하여 증착된 ITO 박막의 열처리 특성
이재형,Lee Jae-Hyeong 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.2
Indium tin oxide (ITO) films have been prepared by DC magnetron sputtering. In order to improve the utilization efficiency of the target and reduce the cost of the film deposition processes, the powder target was used instead of the conventional ceramic target. As-deposited films were annealed at temperatures between $200^{\circ}C$ and $500^{\circ}C$ for 30 min in air. Also, the film was annealed in various atmospheres such as air, $O_2,\;H_2,\;N_2$, and vacuum at $400^{\circ}C$C for 30 min. Effects of the heat treatment conditions on structural, electrical, and optical properties of ITO films were investigated. The annealing temperature of $400^{\circ}C$ and atmospheres of $H_2$ and $N_2$ seem to be the most suitable conditions for post processing.
태양전지 응용을 위한 고품위 및 저가격 ZnO 박막 제조에 관한 연구
이재형,Lee, Jae-Hyeong 한국정보통신학회 2010 한국정보통신학회논문지 Vol.14 No.1
본 연구에서는 타겟 제작에 드는 비용을 줄이고, 타겟 이용의 효율성을 높이기 위해 기존의 소결된 세라믹 타겟 대신 분말 타겟으로 사용하여 알루미늄 도핑된 산화아연(Aluminum doped zinc oxde; AZO)박막을 마그네트론 스퍼터법에 의해 제조하고, 스퍼터 압력에 따른 박막 물성을 조사하였다. 유리 기판에 증착된 AZO 박막은 타깃 종류 및 스퍼터 압력에 관계없이 기판에 수직한 c-축 방향으로 우선 성장방위를 갖는 hexagonal 구조로 성장되었다. 스퍼터 압력이 증가함에 따라 이 면 방향으로의 결정성장이 촉진되었다. AZO 박막의 전기적, 광학적 특성은 스퍼터 압력 증가에 따라 향상되었으며, 15 mTorr에서 $6.5{\times}10^{-1}\;{\Omega}-cm$의 최소의 비저항 값을 나타내었다. Aluminum doped zinc oxide (AZO) films have been prepared on Coming 7059 glass substrates by r.f. magnetron sputtering method. A powder target instead of a conventional sintered ceramic target was used in order to improve the utilization efficiency of the target and reduce the cost of the film deposition process. The influence of sputter pressure on the structural, electrical, and optical properties of AZO films were studied. The AZO films had hexagonal wurtzite structure with a preferred c-axis orientation, regardless of sputter pressure and target types. The crystallinity and degree of orientation was increased by increasing the sputter pressure. For higher sputtering pressures, a reduction of the resistivity was observed due to a increase on the mobility and the carrier concentration. The lowest resistivity of $6.5{\times}10^{-3}\;{\Omega}-cm$ and the average transmittance of 80% can be obtained for films deposited at 15 mTorr.
슈퍼듀플렉스 스테인리스강의 TIG 용접에서 질소 침투 모델에 관한 연구
이재형,정병호,조상명,전재호,Lee, Jae-Hyoung,Jung, Byong-Ho,Cho, Sang-Myung,Jun, Jae-Ho 대한용접접합학회 2015 대한용접·접합학회지 Vol.33 No.3
Superduplex stainless steels are important materials to the oil and gas industry, especially for off-shore production. TIG welding of super duplex stainless steels to obtain the optimal phase balance between austenite and ferrite is mainly achieved by controlling the cooling rate and the weld chemistry. The latter depends on the filler wire chosen and the shielding gas used. If TIG welding of superduplex stainless steels is performed with argon shielding gas only, then nitrogen gets lost from the weld pool, which can result in a ferrite-rich weld metal, with an inferior corrosion resistance than parent metal. In the present study, nitrogen permeation model from the shield gas which gets into the weld metal in DCEN-TIG welding has suggested. This plasma stream model shows characteristics of permeation of nitrogen ions into the molten metal due to the strong physical effect of plasma stream which formed by the arc pressure rather than the permeation of nitrogen ions caused by electric effect.