대형주강품에 대한 CAE 시스템 개발 연구

이영철,이두호,김종기,소찬영,최정길,홍준표 ( Young Chul Lee,Doo Ho Lee,Jong Ki Kim,Chan Young So,Jeong Kil Choi,Chun Pyo Hong ) 한국주조공학회 1997 한국주조공학회지 Vol.17 No.5

N/A An integrated computer program consisting of a pre-processor, main solver, and post-processor was developed for the design of large steel castings. The pre-processor, based on the AutoCAD, enables the user to produce approval drawings, casting design drawings and mesh diagrams in sequence using a personal computer. In the main solver, two numerical models were employed; one models the fluid flow during mold filling, and the other models the heat transfer and solidification. The post-processor can be used to present simulation results such as flow pattern, mold filling sequences, solidification times, temperature gradients and location of shrinkage defects by color graphics. In order to validate the applicability of the present integrated program, a series of experiments on simple-shaped steel castings were carried out. After the validation of the present model, it was applied to the casting design of the large steel anchor of an SC42 alloy. Various solidification parameters such as a temperature distribution and a solidification time in the casting and the mold were compared with those obtained experimentally. Simulated results predicting shrinkage defects were in good agreement with those obtained experimentally. It was found that the present method can be successfully applied to the quantitative casting design for complex-shaped large steel castings. (Received June 4, 1997)

21세기 신 에너지 가스 하이드레이트 연구 및 기술개발 현황 : 국내의 중장기 개발 방향

이영철,백영순,조병학,박기환,류병재,Lee Young Chul,Baek Young Soon,Cho Byoung Hak,Park Ki Whan,Ru Byong Jae 한국석유지질학회 1999 한국석유지질학회지 Vol.7 No.1

에너지 자원의 빈국인 한국은 에너지 자원의 기본적인 사용량 중에서 절대적인 양을 차지하는 석유 및 천연가스를 $100{\%}$수입에 의존하고 있다. 정부가 유사시 즉각적으로 실시하여야 할 중요한 역할 중의 하나가 이와 같은 유용한 에너지 자원을 다양하게 확보하는 것이다. 가스 하이드레이트는 천연가스와 다론 형태의 에너지로서 그 매장량이 해양이나 영구동토지역 등 전세계적으로 분포되어 있으므로 가까운 미래의 천연가스 대체 자원으로서 주목을 받고 있다. 특히 한반도 주변의 동해에 많은 양의 가스 하이드레이트가 매장되어 있을 것으로 기대된다 따라서 이 논문에서는 국내외 연구 및 기술개발 동향을 검토하여 탄성파 탐사를 통한 해석, 가스 하이드레이트의 특성 및 물리적인 물성, 그리고 가스 하이드레이트의 활용 기술 등에 관련된 국내의 중장기적인 가스 하이드레이트의 기본적인 연구 및 기술개발에 대하여 전체적인 프로젝트의 개요를 설명하였다. Korea, an energy-resources-poor country, imports $100{\%}$ of its, oil and, natural gas supply, which accounts for the greater part of its total primary requirements. One of the important task of the government is diversification of available energy resources such as oil and natural gas. Natural gas hydrate, which is non-conventional types of natural gas, distributes worldwide, especially in marine and permafrost. It would become a target of natural gas resources in the near future. Especially sigrificant amount of hydrates are expected to be located in the East Sea around Korea Peninsular. This paper describes about a multi-year overall project framework of basic research and technological development of natural gas hydrate in Korea focused on the interpretation of the seismic survey, the characteristics and physical properties of the natural gas hydrate, and the utilizable technology of natural gas hydrates from the status of research and development of the world.

屠殺方法 및 死後時間經過에 따르는 조직비반세포의 出現狀況에 關한 實驗的硏究

李永哲(Young Chul Lee) 대한외과학회 1964 Annals of Surgical Treatment and Research(ASRT) Vol.6 No.5

하악 과두저형성증 환자의 임상적 평가

이영철,조봉혜,옥수민,허준영,김경희,안용우,고명연,정성희,Yi, Young-Chul,Cho, Bong-Hae,Ok, Soo-Min,Heo, Jun-Young,Kim, Kyung-Hee,Ahn, Young-Woo,Ko, Myung-Yun,Jeong, Sung-Hee 대한안면통증구강내과학회 2013 Journal of Oral Medicine and Pain Vol.38 No.2

측두하악장애를 주소로 하는 환자 276명에 대해 임상검사와 방사선검사를 시행하였다. 하악과두 저형성으로 진단된 189명의 실험군과 골관절염으로 진단된 87명의 대조군을 임상적으로 비교하여 다음과 같은 결과를 얻었다. 1. 하악 과두저형성은 골관절염과 임상적으로 많은 부분이 유사하였다. 2. 하악 과두저형성은 골관절염에 비하여 방사선적 진단부위와 통증부위의 일치율이 현저하게 낮았다. 3. 하악 과두저형성 양측이환군이 편측이환군에 비해 교합불편감 및 이악물기습관이 많았다. 4. 편측이환군 비교시 하악 과두저형성은 편측저작습관이 높았으며, 개구제한감을 더 많이 느꼈다. 골관절염은 아침의 불편감 및 두통을 많이 호소하였으며 진단부위와 단순관절음 일치율이 높았다. 5. 양측이환군 비교시 하악 과두저형성이 골관절염보다 평상시 두통을 더 많이 호소하였으며, 수평피개량도 컸다. Objective : Condyle hypoplasia in temporomandibular joint(TMJ) is often observed in several radiographic views. Mandibular Condyle hypoplasia is frequently confused with osteoarthritis with bony changes in TMJ. This paper investigated clinical characteristics of mandibular condyle hypoplasia as compared with TMJ osteoarthritis. Material and method : 276 patients with TMD were taken clinical and radiological examination and were divided into study group, 189 patients diagnosed with mandibular condyle hypoplasia, and control group, 87 patients diagnosed with TMJ osteoarthritis. And clinical features(Onset, Overjet, Overbite, Noise, Locking, NAS of noise, LOM, pain, MCO, and site of diagnosis and pain)of the two groups were compared. Results : 1. Mandibular condyle hypoplasia and TMJ osteoarthritis were similar in many of the clinical features. 2. Mandibular condyle hypoplasia concordance rates of the radiographic diagnosis site and the pain site was significantly lower than TMJ osteoarthritis. 3. Bilateral mandibular condyle hypoplasia group had more occlusal discomfort, and clenching habits than unilateral mandibular condyle hypoplasia group. 4. Unilateral mandibular condyle hypoplasia group had more unilateral chewing habits and LOM than unilateral TMJ osteoarthritis group. Unilateral TMJ osteoarthritis group had more morning stiffness and higher concordance rates of the radiographic diagnosis site and the click sound site than unilateral mandibular condyle hypoplasia group. 5. Bilateral mandibular condyle hypoplasia group had more usual headaches and overjet than bilateral TMJ osteoarthritis group. Conclusion : Mandibular condyle hypoplasia has somewhat distinguishing clinical characteristics as compared with TMJ osteoarthritis.

가변형 박막 유전체에 전극을 임베디드 시킨 고가 변형 커패시터

이영철,홍영표,고경현,Lee Young-Chul,Hong Young-Pyo,Ko Kyung-Hyun 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.9

본 논문에서는 가변형 $Bi_2O_3-ZnO-Nb_2O_5(BZN)$ Pyrochlore 박막을 이용한 고가변형 inter-digital capacitor를 제안하였다. 가장자리 전계 효과를 이용한 가변성의 향상과 DC 전압의 감소를 위해 inter-digital capacitor의 전극이 박막 내부에 삽입되었다. 2.5D simulator를 이용한 설계 결과, 제 안된 구조의 inter-digital capacitor(IDC)가 일반적인 구조의 IDC에 비해 가변성이 10 % 향상되었다. 제안된 IDC는 설계 결과를 바탕으로 실리콘 기판 위에 BZN 박막을 이용하여 제작되었다. BZN 박막은 reactive RF magnetron sputtering 방법을 이용하여 증착되었다. 제작된 inter-digital capacitor는 5.8 GHz와 18 V의 DC 인가 전압에서 최대 가변율이 50 %였다. In this paper, a novel tunable inter-digital capacitor using dielectric tunable $Bi_2O_3-ZnO-Nb_2O_5(BZN)$ pyrochlore thin films is proposed. In order to improve the tunability and reduce DC bias voltage using the fringing electric field, the electrodes of the inter-digital capacitor are embedded in the thin film. Designed results using a 2.5 D simulator show that the tunability of the proposed inter-digital capacitor improves by 10 %, compared to the conventional inter-digital capacitor. The proposed IDC, which is based on the simulation results, was fabricated, using the BZN thin film deposited by a reactive RF magnetron sputtering on the on the silicon substrate. The fabricated inter-digital capacitor shows the maximum tunability of 50 % at 5.8 GHz and 18 V DC applied.

정어리유의 용매분별과 분별유의 이용

이영철,김영붕,김기성 ( Young Chul Lee,Young Boong Kim,Kee Sung Kim ) 한국유화학회 1989 한국응용과학기술학회지 Vol.6 No.2

In order to fractionate sardine oil by different solvents for an effective use of fish oil being subjected to the limit of use, an attempt was to investigate the proper solvents, ratios and fractionation time. The results of the study were as follows: 1. The proper solvent of fractionation using ethanol, isopropyl alcohol, acetone, and hexane was ethanol, and its optimum ratio was 2:1 (ethanol: oil, v/w). The proper time of ethanol fractionation by the ratio (2:1) was 4hr at 10℃, 6hr at 5℃, 8hr at 0℃ and 8hr at -5℃, respectively. 2. In the fractionation by stages using the ratio (2:1) at each temperature, the yield of stearine was 8% at 10℃ (Fraction Ⅰ), 32% at 5℃ (Fraction Ⅱ), 7% at 0℃ (Fraction Ⅲ) and 10% at 0℃ (Fraction Ⅳ), respectively. When ethanol fractionation was undertaken at 5℃ by stages, the yield of stearine (Fraction Ⅱ) was high. 3. lodine value of Fraction Ⅱ was 96.8. This result indicated that the hydrogenation process would be simpliied by fractionation 4. The percentage of the decrease of polyenoic acids from original sardine oil to Fraction Ⅱ oil was from 30.5% to 13.5%. The major fatty acids of Fraction Ⅱ were palmitic and oleic acids and these fatty acids were about 52% of total fatty acids. Therefore, Fraction Ⅱ, which remained liquid oil at room temperature because solid fat content was 6.9% at 20℃, would be used as frying oil.

위암의 연령에 따른 차이

김영재(Young Jae Kim),이영철(Young Chul Rhee),이만길(man Kill Lee),차호(Ho Cha),정영채(Young Chae Jung) 대한소화기학회 1987 대한소화기학회지 Vol.19 No.1

N/A Comparative analytic review on clinical, endoscopic and histopathological findings was done in 13 cases of young age (under 29), 446 cases of mid age (30~69) and 39 cases of old age (above 70) stomach cancer who were visited Department of Internal Medicine of Masan Koryo General Hospital from March 1981 to July 1985. The following results were obtained: The peak of age incidence was the 5th decade amounting to 36.8%. The ratio between male and female was 2.6:1. The main chief complaint of each group was epigastric pain and it was followed by epigastric fullness. The most patient had the duration of symptom from 3 months to 6 months. For old-age group, mid-age group, major site of lesion in the antrum, meanwhile body for young-age group. The most frequent type of gastric cancer was type III in each group by Borrmanns classification. For each group, adenocarcinoma was major cases in the view of histopathological findings, and incidence of well differentiated type adenocarcinoma were lower in young-age group than others.

Biomass 유래 퓨란계 단량체를 이용한 폴리에스터의 중합 및 특성 연구

정용석(Yong Seong Chung),이영철(Young Chul Lee),서강진(Kang Jin Seo),김명준(Myeong Jun Kim),정지혜(Ji Hea Jeong),노시태(Si Tae Noh) 한국고분자학회 2011 폴리머 Vol.35 No.6

바이오매스에서 유래된 2,5-dihydroxymethylfuran(DHMF)을 KMnO4 산화반응으로 furan-2,5- dicarboxylic acid(FDCA)를 합성하였다. 합성한 FDCA와 다이올류를 에스테르화 반응과 축중합 반응을 진행시 켜 폴리에스터를 중합하였다. 폴리에스터는 NMR을 통해 조성을 분석하였고 DSC와 TGA를 통해 열적특성을 분 석하였다. 합성된 폴리에스터의 고유점도는 0.78∼1.2 dL/g으로 상용화된 poly(ethylene terephthalate)(PET) 와 비슷하였다. 다이올의 길이가 증가할수록 Young`s modulus와 strength는 낮아지고 elongation-to-break는 높아지는 경향을 확인하였다. 합성한 poly(ethylene furandicarboxylate)(PEF)의 Young`s modulus는 3551 MPa, strength는 103 MPa로 상용화된 PET와 비슷하였다. Furan-2,5-dicarboxylic acid (FDCA) was synthesized by KMnO4 oxidation of 2,5-dihydroxymethylfuran( DHMF) derived from biomass. Polyesters were synthesized by esterification and polycondensation of FDCA with various diols(ethane-1,2-diol, propane-1,3-diol, butane-1,4-diol, hexane- 1,6-diol, decane-1,10-diol). The composition of polyesters was characterized by using 1H NMR. Thermal properties of the polyesters were characterized by DSC and TGA. Intrinsic viscosities(IV) of the polyesters were measured to be 0.78∼1.2 dL/g comparable with IV of commercial poly(ethylene terephthalate)(PET). As the chain lengths of diols increased, Young`s modulus and strength decreased and elongation-to-break generally increased. Young`s modulus and strength of the polyesters were measured to be 3551 MPa and 103 MPa, respectively, comparable with commercial PET.

해외 학술활동: 미국 자연식품 박람회

이영철,Lee, Young-Chul 한국식품연구원 2010 食品技術 Vol.23 No.2

초소형 60 GHz LTCC 전력 증폭기 모듈

이영철,Lee, Young-Chul 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.11

본 논문에서는 저온 소성 세라믹(LTCC)에 기초한 SiP 기술을 이용하여 60 GHz 무선 통신을 위한 송신기용 초소형 전력 증폭기 LTCC모듈을 설계 및 제작하여 그 특성을 측정하였다. 60 GHz대역에서 LTCC 다층 기판과 전력 증폭기 MMIC의 상호 연결 손실을 줄이기 위해 와이어 본드와 기판 사이의 천이를 최적화하였고, MMIC 집적을 위한 고 격리 구조를 제안하였다. 와이어 본드 천이의 경우, 와이어의 인덕턴스를 감소시키기 위해 매칭 회로의 설계와 와이어 상호간의 간격을 최적화하였다. 또한 상호 연결 불연속 효과로 인한 전계의 방사를 억제하기 위해 코프라나 와이어 본드 구조를 이용하였다. 고 격리 모듈 구조를 위하여, LTCC 기판 내부에 DC 전원 배선을 내장시키고 비아로 그 주위를 차폐를 시켰다. 5층의 LTCC 기판을 사용하여 제작된 전력 증폭기 LTCC모듈의 크기는 $4.6{\times}4.9{\times}0.5mm^3$이고, $60{\sim}65GHz$ 대역에서 이득과 P1dB 출력 전력은 각각 10 dB와 11 dBm이다. In this paper, using low-temperature co-fired ceramic(LTCC) based system-in-package(SiP) technology, a very compact power amplifier LTCC module was designed, fabricated, and then characterized for 60 GHz wireless transmitter applications. In order to reduce the interconnection loss between a LTCC board and power amplifier monolithic microwave integrated circuits(MMIC), bond-wire transitions were optimized and high-isolated module structure was proposed to integrate the power amplifier MMIC into LTCC board. In the case of wire-bonding transition, a matching circuit was designed on the LTCC substrate and interconnection space between wires was optimized in terms of their angle. In addition, the wire-bonding structure of coplanar waveguide type was used to reduce radiation of EM-fields due to interconnection discontinuity. For high-isolated module structure, DC bias lines were fully embedded into the LTCC substrate and shielded with vias. Using 5-layer LTCC dielectrics, the power amplifier LTCC module was fabricated and its size is $4.6{\times}4.9{\times}0.5mm^3$. The fabricated module shows the gain of 10 dB and the output power of 11 dBm at P1dB compression point from 60 to 65 GHz.