http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
3차원 이방성확산 방정식을 이용한 동영상의 영상잡음제거
이석호,최은철,강문기,Lee, Seok-Ho,Choe, Eun-Cheol,Gang, Mun-Gi 대한전자공학회 2002 電子工學會論文誌-SP (Signal processing) Vol.39 No.2
Nowadays there is a trend to apply the diffusion equation to image Processing. The anisotropic diffusion equation is highly favoured as a noise removal algorithm because it can remove noise while enhancing edges. However if the two dimensional anisotropic diffusion equation is applied to the noise removal of video sequences, flickering artifact due to the luminance difference between frames and ghost artifact due to the interfiltering between frames occur. In this paper the two dimensional anisotropic diffusion equation is extended to the sequence axis. The Proposed three dimensional anisotropic diffusion equation removes noise more efficiently than the two dimensional equation, and furthermore removes the flickering and ghost artifact as well. 최근에 확산방정식을 영상처리에 응용하는 연구가 세계적으로 활발하다. 특히 이방성확산 방정식은 영상에서 잡음을 제거하면서도 경계선을 강화시키는 성질로 인하여 영상잡음제거의 알고리즘으로 각광을 받고있다. 그러나 2차원 이방성확산방정식을 그대로 동영상의 영상잡음제거에 적용할 경우, 각 프레임간의 밝기 차로 인한 깜빡임 현상(flickering artifact)과 프레임간 필터링으로 인한 고스트 현상(ghost artifact)이 나타난다 그러므로 본 논문에서는 2차원 이방성확산방정식을 시퀀스 축으로 확장시킨 3차원 이방성확산방정식을 제안한다. 제안한 3차원 이방성확산방정식은 2차원 이방성확산방정식보다 더 효율적으로 영상잡음을 제거할 뿐만 아니라, 깜빡임 현상과 고스트 현상도 효율적으로 제거한다는 것을 이론적으로 그리고 실험적으로 검증하였다.
PTMSP-Borosilicate 복합막에 의한 수소-질소 기체 분리에 관한 연구
이석호,강태범,Lee, Suk Ho,Kang, Tae Beom 한국막학회 2014 멤브레인 Vol.24 No.6
무정형의 괴상의 다공성 borosilicate는 trimethylborate (TMB)/ tetraethylorthosilicate (TEOS) 몰비 0.01~0.10 겔체를 $700{\sim}800^{\circ}C$ 온도범위에서 열처리 하였을 때 얻어졌다. BET와 SEM 관찰에 의하면 $700{\sim}800^{\circ}C$에서 얻어진 borosilicate의 표면적은 $251.12{\sim}355.62m^2/g$이고, 기공직경은 3.5~4.9 nm이며, 입자크기는 30~60 nm이었다. TGA측정에 의하면 borosilicate가 poly[1-(trimethylsilyl)propyne](PTMSP)에 첨가되었을 때 PTMSP-borosilicate 복합막의 열적 안정성은 향상 되었다. SEM관찰에 의하면 borosilicate는 $1{\mu}m$ 크기로 복합막 내에 분산되어 있었다. 기체투과실험에 의하면 PTMSP에 borosilicate 함량이 증가하면 자유부피, 공동, 기공률이 증가하여 기체투과가 용해확산에 의한 것보다 분자체거름, 표면확산, Knudsen 확산에 의해 일어나는 경우가 점차 증가함으로 해서 $H_2$와 $N_2$의 투과도는 증가하고 선택도($H_2/N_2$)는 감소하였다. The amorphous and porous borosilicate without any cracks was obtained under the following condition : 0.01~ 0.10 mole ratio of trimethylborate (TMB)/ tetraethylorthosilicate (TEOS) and the temperature of $700{\sim}800^{\circ}C$. According to the BET and SEM measurements, borosilicate heat-treated in between 700 and $800^{\circ}C$ showed the surface area of $251.12{\sim}355.62m^2/g$, the pore diameter of 3.5~4.9 nm, and the particle size of 30~60 nm. According to the TGA measurements, the thermal stability of poly[1-(trimethylsilyl)propyne](PTMSP) membrane was enhanced by inserting borosilicate. SEM observation showed that the size of dispersed borosilicate in the composite membrane was $1{\mu}m$. The results showed that the permeability of $H_2$ and $N_2$ increased and the selectivity of $H_2/N_2$ decreased upon the addition of borosilicate into PTMSP membranes. Addition of borosilicate may possibly increase the free volume, cavity and porosity of membranes indicating that permeation occurred by molecular sieving, surface and Knudsen diffusion rather than solution diffusion of gases.
Prediction of Reactor Coolant Pump Performance Under Two-Phase Flow Conditions
이석호,방영석,김효정,Lee, S.,Bang, Y.S.,Kim, H.J. Korean Nuclear Society 1994 Nuclear Engineering and Technology Vol.26 No.2
이상유동시 원자로 냉각재 펌프의 성능을 펌프의 기하학적 형상 및 단상 유동시의 펌프 성능을 이용하여 예측하였다. 단상 유동시의 원자로 냉각재 펌프의 벽면 마찰손실은 Truckenbrodt의 경계층 이론을 이용하여 예측하였으며, 계산된 벽면 마찰 손실 및 분리 손실을 사용하여 이상유동시의 수두손실을 예측하였다. 해석결과는 Combustion Engineering 사의 펌프 실험 데이터와 비교하였다. 또한 냉각재 상실사고시 이상유동배수가 첨두 피복재 온도에 미치는 영향을 RELAP5를 사용하여 평가하였으며, 분석결과는 이상유동배수의 정확성이 중요한 영향을 미치는 것으로 나타났다. A performance of reactor coolant pump in two-phase flow is examined using the pump geometric conditions and the performance of the pump in single-phase flow. Wall friction loss of the reactor coolant pump in single-phase flow is prdicted using the Truckenbrodt boundary layer theory, and the head loss in two-phase flow is predicted with calculated well friction loss and separation loss coefficients. The analysis results are compared with the Combustion Engineering pump test data. The effect of two-phase multiplier on the peak clad temperature in Loss-of-Coolant Accident is also examined using the RELAP5 and the results indicate the importance of its accuracy.
정책 제안 - 공적개발원조(ODA)를 통한 글로벌 원자력 안전 공여
이석호,Lee, Seok-Ho 한국원자력산업회의 2010 원자력산업 Vol.30 No.2
본고는 우리나라가 IAEA 회원국이며 원전 수출국으로서 국제 원자력 안전 확보에 기여하고, OECD 개발원조위원회 (DAC)의 정식 회원국으로서 선진 공적개발원조 (ODA) 정책을 실현하기 위한 전략의 일환으로 “원자력 안전 ODA 정책”을 제안하고자 작성되었다.
Analyses of SGTR Accident With Mihama Unit Experience
이석호,김갑,김효정,은영수,Lee, S.H.,Kim, K.,Kim, H.J.,Eun, Y.S. Korean Nuclear Society 1994 Nuclear Engineering and Technology Vol.26 No.1
1991년 2월 미하마원전에서 발생한 증기발생기 세관 파열사고에 대한 경험을 바탕으로, 본 사고에 대한 고리 1호기의 대처능력을 평가하기 위하여 해석을 수행하였다. 고리 1호기의 계통설계 및 운전조건은 미하마 2호기와 아주 유사하기 때문에 고리 1호기에서 발생한 가상의 증기발생기 세관 파열사고시의 사고경위 및 전개에 대한 평가가 필요하였다. 해석은 고리 1호기 EOP를 근거로 현실적으로 가능하게 수행되었다. 해석결과, 파열된 세관을 통한 누출은 사고후 약 40분 후에 정지되었으며, 고리 1호기는 유사한 증기발생기 세관 파열사고의 경우 충분한 대처능력이 있음을 보였다. 그러나, SI 신호작동후 소외전원으로 부터의 비안전등급 AC전원으로 단절되는 설계에 대한 재고가 필요하며, EOP의 운전절차가 운전원의 적절한 판단을 요구하기에는 다소 충분치 못함을 보였다. 또한 미하마 원전의 사고를 실험적으로 모사한 LSTF의 실험결과를 이용 해석코드인 RELAP5/MOD3의 평가능력에 대하여 해석을 수행하였다. 해석결과 코드는 사고 초기의 누설량 예측을 제외하고는 일반적으로 실험결과와 잘 일치하고 있음을 보였다. A SGTR accident postulated at Kori unit 1 is simulated with Mihama unit experience, which occurred on February 1991, to evaluate the capability of plant to cope with the transient. The system design and plant conditions of Kori Unit 1 are much similar with those of Mihama Unit 2. Therefore, special concern has been given to evaluate the sequence and the resulting consequence of the postulated SGTR accident at the Kori unit 1 An analysis is peformed as realistically as possible, with following the EOP of Kori unit 1. The result indicates that the leak through tube break terminates within about forty minutes, and the Kori unit 1 may be sufficient to cope with SGTR accident with same type of sequence. However, the reconsideration may be required for the design of Kori unit 1 which disconnects non-safety AC power from off-site power on SI signal generation. It may be pointed out that the content of EOP for SGTR accident is not enough to require operator's proper judgements. An analysis of SGTR accident tested in the LSTF which simulated the SGTR accident at the Mihama Unit 2 is peformed using the RELAP5/MOD3. The results indicates that the code yields in general good agreement with the test, except the break flowrate at the early stage of the event.
PDMS-SiO<sub>2</sub>·B<sub>2</sub>O<sub>3</sub> 복합막에 의한 수소-질소 기체 분리
이석호,강태범,Lee, Suk Ho,Kang, Tae Beom 한국막학회 2015 멤브레인 Vol.25 No.2
$SiO_2{\cdot}B_2O_3$ was prepared by trimethylborate (TMB)/tetraethylorthosilicate (TEOS) mole ratio 0.01 at $800^{\circ}C$. PDMS[poly(dimethysiloxane)]-$SiO_2{\cdot}B_2O_3$ composite membranes were prepared by adding porous $SiO_2{\cdot}B_2O_3$ to PDMS. To investigate the characteristics of PDMS-$SiO_2{\cdot}B_2O_3$ composite membrane, we observed PDMS-$SiO_2{\cdot}B_2O_3$ composite membrane using TG-DTA, FT-IR, BET, X-ray, and SEM. PDMS-$SiO_2{\cdot}B_2O_3$ composite membrane was studied on the permeabilities of $H_2$ and $N_2$ and the selectivity ($H_2/N_2$). Following the results of TG-DTA, BET, X-ray, FT-IR, $SiO_2{\cdot}B_2O_3$ was the amorphous porous $SiO_2{\cdot}B_2O_3$ with $247.6868m^2/g$ surface area and $37.7821{\AA}$ the mean of pore diameter. According to the TGA measurements, the thermal stability of PDMS-$SiO_2{\cdot}B_2O_3$ composite membrane was enhanced by inserting $SiO_2{\cdot}B_2O_3$. SEM observation showed that the size of dispersed $SiO_2{\cdot}B_2O_3$ in the PDMS-$SiO_2{\cdot}B_2O_3$ composite membrane was about $1{\mu}m$. The increasing of $SiO_2{\cdot}B_2O_3$ content in PDMS leaded the following results in the gas permeation experiment: the permeability of both $H_2$ and $N_2$ was increased, and the permeability of $H_2$ was higher than $N_2$, but the selectivity($H_2/N_2$) was decreased. 졸겔법에 의해서 trimethylborate (TMB)/tetraethylorthosilicate (TEOS) 몰비 0.01, 온도 $800^{\circ}C$에서 $SiO_2{\cdot}B_2O_3$가 제조되었다. 그리고 제조된 $SiO_2{\cdot}B_2O_3$와 PDMS[poly(dimethylsiloxane)]로부터 PDMS-$SiO_2{\cdot}B_2O_3$ 복합막을 제조하고 막의 물리화학적 특성을 TG-DTA, FT-IR, BET, X-ray, SEM에 의해 조사하고 그리고 $H_2$와 $N_2$의 투과도와 선택도를 조사하였다. TG-DTA, BET, X-ray, FT-IR 측정에 의하면 $SiO_2{\cdot}B_2O_3$는 무정형의 다공성 $SiO_2{\cdot}B_2O_3$였으며, 기공의 평균직경은 $37.7821{\AA}$, 표면적은 $247.6868m^2/g$이었다. TGA 측정에 의하면 PDMS 내에 $SiO_2{\cdot}B_2O_3$가 첨가되었을 때 PDMS-$SiO_2{\cdot}B_2O_3$ 복합막의 열적 안정성은 향상되었다. SEM 관찰에 의하면 $SiO_2{\cdot}B_2O_3$는 약 $1{\mu}m$ 크기로 PDMS 내에 덩어리 상태로 뭉쳐서 분산되어 있었다. 기체투과실험에 의하면 PDMS 내에 $SiO_2{\cdot}B_2O_3$ 함량이 증가하면 $H_2$와 $N_2$의 투과도는 증가하였고, 질소보다 Lenard Jones 분자지름이 작은 $H_2$의 투과도는 $N_2$의 투과도보다 컸으며, 선택도($H_2/N_2$)는 감소하였다.
이석호,전제열,박춘옥,구용숙,김전,성호경,Lee, Suk-Ho,Jun, Jae-Yeol,Park, Choon-Ok,Goo, Yong-Sook,Kim, Jun,Sung, Ho-Kyung The Korean Physiological Society 1990 대한생리학회지 Vol.24 No.1
Vasomotor area로 알려져 있던 외측연수망상체는 최근 rostral ventrolateral medulla로 불리 면서 sympathoexcitatory neuron이 집중적으로 분포하는 연수내 부위로서, 체성교감신경반사에 중요한 역할을 하는 것으로 알려지고 있어 이 부위로의 입력정보가 그동안 많은 연구가 되어온 내측 척수망상로 세포와 어떤 차이를 보이는가를 규명하고자 하였다. 1) Medial SRT 세포는 34 cell중 약 60%가 동측으로 향하였으나, lateral SRT cell의 경우 47 cell의 약 60%가 반대측으로 향하였다. 2) 각 군의 세포를 말초자극에 대한 반응성에 따라, LT cell, Deep cell, HT cell및 WDR cell로 나누었으며 유해자극을 전달하는 세포를 HT와 WDR cell이라 하고, 무해자극을 전달하는 세포와 유해자극을 전달하는 세포의 비율로 볼 때, 다른 부위에 비하여 rostral VLM에 유해자극정보가 비교적 많이 전달됨을 볼 수 있었다. 3) 평균 전도 속도는 각 군간에 유의한 차이가 없었으나, Deep cell은 HT cell보다 유의하게 빠른 전도속도를 보였다. 4) Medial SRT 세포는 척수 회백질 내에서 Rexed laminae VII및 VIII에 주로 분포하며, LRN projecting SRT cell의 경우엔 전 lamina에 걸쳐 고루 분포하였다. 이상의 결과는 내측 및 외측 망상체간의 말초 입력 정보의 차이를 보여주고 있으며, 연수 망상체의 세 부위중 특히 rostral ventrolateral medulla로 많은 동통정보가 입력되고 있어 RVLM의 기능중 하나인 체성교감반사의 통합과 연관된 역할을 하리라 기대된다. Antidromically activated spinoreticular tract (SRT) cell units in the lumbosacral enlargement of ${\alpha}-chloralose$ anesthetized cats were classified as medial and lateral SRT units according to the location of their axonal termination. Identified SRT units were tested fer antidromic conduction velocity, laterality of their axonal projection, the location in spinal gray, peripheral receptive field, the response pattern to graded mechanichal stimulation and the responsiveness to $A{\delta}$ and C volley of the peripheral nerve. 1) The 59% of 34 medial SRT units were recorded in ipsilateral side to the antidromic stimulation site, but 60% of the 47 lateral SRT units projected to contralateral side. 2) Most of the medial SRT cells and rostral ventrolateral medulla (RVLM)-projecting lateral SRT cells were recorded in lamina VII & VIII. The LRN (lateral reticular nucleus)-projecting SRT cells, however, distributed through all the laminae except superficial ones (I & II). 3) The identified SRT units were classified as low theshold (LT), deep, high threshold (HT), wide dynamic range (WDR) cells, based on the response patterns to graded mechanical stimuli. The proportion of SRT units which receive noxious input was 37.5%, 25% and 75% in the medial, LRN-projecting and RVLM SRT group, respectively. 4) There was no significant difference in the mean conduction velocities between the 3 groups. But the deep cells had significantly higher velocity than that of the HT cells. The above results show that the peripheral inputs to the SRT units are different in the 3 groups: medial, LRN & RVLM SRT group. Especially in case of the SRT cells projecting to RVLM which is a probable candidate fur the integration center of various pressor reflexes such as somatosympathetic reflex, the noxious informations occupy higher proportion of input to them than in other groups. Therefore the noxious information transmitted through the lateral SRT destined for RVLM is expected to play a role in somatosymapthetic reflex.
하드웨어 복잡도를 줄이기 위한 RDO내 DCT 공유구조의 HEVC 화면내 예측부호화기
이석호,장준영,변경진,엄낙웅,Lee, Sukho,Jang, Juneyoung,Byun, Kyungjun,Eum, Nakwoong 한국스마트미디어학회 2014 스마트미디어저널 Vol.3 No.4
HEVC 차세대 비디오 압축 표준은 ITU-TSG16 WP와 ISO/IEC JTC1/SC29, WG 11 두 단체 공동으로 2013년 표준화가 완료되었으며 기존 H.264 하이프로파일과 비교하여 압축효율은 두배 정도이다. HEVC에서 화면내 예측 (intra prediction) 모드는 planar와 DC 모드를 포함한 35개의 방향성 모드가 있으나 모든 모드를 적용한 부호화기를 구현하기 위해서는 하드웨어 복잡도가 증가하며 각 코딩유닛(coding unit) 사이즈에 따라 정확한 모드예측을 위한 RDO (rate distortion optimization) 계산에 필요한 DCT 사이즈도 증가하였기 때문에 본 논문에서는 하드웨어 사이즈를 줄이기 위하여 양자화를 위한 DCT와 SSE 계산을 위한 RDO 블럭내 DCT를 공유하는 화면내 예측부호기를 제안한다. 성능은 HEVC 참조소프트웨어인 HM-13.0과 비교하여 BD-rate는 평균 20% 증가하며 부호화시간은 4배 이상 단축되어 300MHz에서 FHD ($1920{\times}1080p$) 영상의 초당 60 프레임 실시간 부호화가 가능하다. HEVC is the latest joint video coding standard with ITU-T SG16 WP and ISO/IEC JTC1/SC29/WG11. Its coding efficiency is about two times compared to H.264 high profile. Intra prediction has 35 directional modes including dc and planer. However an accurate mode decision on lots of modes with SSE is too costly to implement it with hardware. The key idea of this paper is a DCT shared architecture to reduce the complexity of HEVC intra encoder. It is to use same DCT block to quantize as well as to calculate SSE in RDO. The proposed intra encoder uses two step mode decision to lighten complexity with simplified RDO blocks and shares the transform resources. Its BD-rate increase is negligible at 20% on hardware aspect and the operating clock frequency is 300MHz@60fps on FHD ($1920{\times}1080$) image.