율무 약침이 고지방식이 급여 흰쥐의 혈액 내 지질구성 및 Glucose량에 미치는 영향

이상훈,이지향,이은,이준무,Lee, Sang-Hoon,Lee, Ji-Hyang,Lee, Eun,Lee, Joon-Moo 경락경혈학회 2006 Korean Journal of Acupuncture Vol.23 No.1

Objective : To investigate the effects of Yullmoo (Coix lachryma-jobi var. mayuen stapf.) Pharmacopuncture on plasma lipid composition and glucose concentration in hyperlipidemic rats. Methods : ${\beta}-lipoprotein$ free fatty acids, triglyceride and total cholesterol levels in Yullmoo (Coix lachryma-jobi var. mayuen stapf.) Pharmacopuncture groups were compared with those in the control group. Results : Concentration of ${\beta}-lipoprotein$ showed no significantly different in all treatment groups. Concentration of free fatty acids, triglyceride and total cholesterol in plasma were decreased in the Yullmoo (Coix lachryma-jobi var. mayuen stapf.) Pharmacopuncture groups. In the Yullmoo (Coix lachryma-jobi val. mayuen stapf.) Pharmacopuncture groups, plasma LDL-cholesterol showed a lower value and HDL-cholesterol showed a higher value than those of the control group. Contents of glucose were decreased in the Yullmoo (Coix lachryma-jobi val. mayuen stapf.) Pharmacopuncture groups. Conclusions : The results suggest that Yullmoo (Coix lach.yma-jobi var. mayuen stapf.) Pharmacopuncture may have an impact on lipid metabolism to potentially prevent obesity and enhance treatment effect.

국내육성 톨 페스큐 품종간 생육특성 및 종자생산성

이상훈,최기준,김기용,지희정,황태영,박형수,김종근,이기원,Lee, Sang-Hoon,Choi, Gi Jun,Kim, Ki-Yong,Ji, Hee Chung,Hwang, Tae Young,Park, Hyung Soo,Kim, Jong Gun,Lee, Ki-Won 한국축산환경학회 2014 한국축산시설환경학회지 Vol.20 No.4

A new tall fescue variety (Festuca arundinacea Schreb.) named Greenmaster and Purumi were. In this study, we evaluated the seed production of new tall fescue domestic varieties were cultivated in Korea. Agronomic aspects of tall fescue domestic varieties were determined using seed production and forage nutritive value of straw at the National Institute of Animal Science from 2013 to 2014. The heading date according to the varieties displayed differences and domestic varieties showed enhanced disease resistance. The harvested seed yields of Greenmaster was 35% higher as 1,664 kg/ha and it's also yield of straw higher than that of Fawn. However, the nutritive value of both varieties was similar. The dry matter yield of Pumumi was 25% higher as 11,080 kg/ha. Accordingly, developed a new variety of domestic tall fescue with excellent environmental adaptability, aiming to make contribution to the vitalization of the Korean grassland industry.

저칼슘식이가 백서의 하악골 골절치유에 미치는 영향에 관한 실험적 연구

이상훈,황의환,이상래,LEE Sang-Hoon,HWANG Eui-Hwan,LEE Sang-Rae 대한영상치의학회 1997 Imaging Science in Dentistry Vol.27 No.1

The purpose of this study was to investigate effects of osteoporosis on fracture wound healing in the calcium deficient rat. To research the experiment some ten-week old Wistar strain rats with approximately 300 gms weight were selected. Then, the rats were divided into two groups: Normal diet group(rats given a normal diet before and after bone fracture) and Low calcium diet group(rats given a low calcium diet before and after bone fracture). Both groups had been provided with each diet for three weeks. When the rats became thirteen weeks old, the mandibular angle of rats in both groups was artificially fractured for test. The healing of fracture wounds was reviewed by using soft x-ray radiography and /sup 99m/Tc-MDP bone scan and also histopathologic examination. The obtained results were as follows : 1. The radiolucency of the fracture site for the Normal diet group started to decrease from the 14th day since the experiment was made, while the Low calcium diet group began decrease in the radiolucency from the 21st day of the experiment. The radiolucency for the Normal diet group disappeared at the 42nd day, but one for the Low calcium diet group disappeared at the 56th day of the experiment. 2. The highest uptake rate of /sup 99m/Tc-MDP stood at the 14th day of the experiment in the Normal diet group and the Low calcium diet group's maximum rate was recorded at the 21st day of the experiment. These both groups were gradually experiencing decrease in the uptake rate as the experiment time was going on. However, the uptake rate in the Low calcium diet group was lower than one in the Normal diet group. 3. For the Normal diet group, the newly formed trabeculae, which were similar to one of the surroundung bone, were seen at the 42nd day of the experiment. On the other hand, the Low calcium diet group showed at the 56th day of the experiment that the osteoporotic findings looked weak, irregular trabeculae, and also large bone marrow space were observed clearly. As a result of the above experiment, it is said that the healing of the fracture can be completed for both groups, the Normal diet group and the Low calcium diet group. However, the amount of the newly formed bone wound in the Low calcium diet group is rather decreased compared to one in the Normal diet group and at the same time the healing of the fracture is delayed in the Low calcium diet group. Consequently, for the successful healing of fracture in osteoporosis, it is considered that the management of the etiologic factors of osteoporosis must be preceded. The more study of calcium metabolism and functions of osteoblast and osteoclast needs to proceed on.

아말감수복시 상아질접착제가 변연봉쇄에 미치는 영향

이상훈,이긍호,Lee, Sang-Hoon,Lee, Keung-Ho 대한소아치과학회 2002 大韓小兒齒科學會誌 Vol.29 No.1

고동아말감수복시 프라이머 및 상아질접착제의 변연봉쇄효과를 비교검토하기 위하여 발거된 소구치 100개의 치아 협면에 5급 와동을 형성하고 대조군과 실험군으로 나누어 $Copalite^{(R)}$와 프라이머 및 상아질접착제를 적용하였다. 고동아말감합금인 $Luxalloy^{(R)}$로 충전한후 변연누출의 정도를 측정하고 주사전자현미경을 이용해 치질과 아말감과의 경계면을 관찰하여 다음과 같은 결론을 얻었다. 1. 교합측과 치은측에서 실험군은 모두 대조군보다 유의하게 적은 변연누출을 보였다(p<0.05). $Copalite^{(R)}$를 적용한 군은 나머지 실험군에 비해 많은 변연누출을 보였다(p<0.05). 2. 모든 실험군의 변연누출은 치은측이 교합측보다 많았다. 3. 산부식 처리, 프라이머 적용후 접착제사용 및 프라이머와 접착제의 혼합사용이 변연누출에 영향을 미치지 못하였다(p>0.05). 4. 주사전자현미경 소견에서는 대조군과 $Copalite^{(R)}$를 적용한 군에서 아말감과 와동벽사이에 연속적인 틈이 관찰되었으나, 나머지 실험군에서는 틈이 프라이머나 접착제층으로 채워져 있었다. 이상의 결과로 보아 고동 아말감합금의 사용시에 프라이머나 상아질접착제가 변연누출방지에 효과적이며, $Copalite^{(R)}$는 변연누출방지에 비효율적이다. The purpose of this study was to evaluate microleakage of etched and non-etched amalgam restorations lined with dentin bonding system primer and adhesives. Class V amalgam preparations were made in 100 extracted human premolars divided into 10 groups with 10 teeth each. SEM was taken to assess the dentin/amalgam interface. The results were as follows; 1. At the occlusal and gingival margins, all experimental groups showed lower leakage value than unlined group(p<0.05) The $Copalite^{(R)}-lined$ group showed higher leakage value than other experimental groups(p<0.05). 2. In all experimental groups, the gingival margin showed higher leakage value than the occlusal margin. 3. There were no significant difference between non-etching and etching groups, primer only and primer & adhesive groups, primer & adhesive and self-priming adhesive groups(p>0.05). 4. On the SEM observation, continuous gaps were observed in the unlined and $Copalite^{(R)}-lined$ groups, but the gaps were filled with primer or adhesive layer in other experimental groups.

폐광산 주변 중금속 오염 농경지 토양복원을 위한 다양한 첨가제의 안정화 효율 비교: 컬럼시험연구

이상훈,조정훈,Lee, Sang-Hoon,Cho, Jung-Hoon 한국지하수토양환경학회 2009 지하수토양환경 Vol.14 No.4

본 연구는 안정화제를 이용한 윈위치 화학적 고정(In-situ Chemical fixation) 방법으로 휴, 폐광산 주변 중금속 오염농경지 정화 방법의 적용성을 자연상태에 보다 근접한 컬럼시험을 통해 평가하였다. 특히 특정원소가 아닌 다원소로 오염된 토양을 대상으로, 두가지 이상의 안정화제 조합을 시도하여 최적 비율을 산정하였다. 컬럼시험에 사용된 안정화제들은 $FeSO_4\;+\;KMnO_4$, $CaCO_3$, 영가철, 슬러지(탄광폐수처리소택지 발생) 및 지올라이트 등이었으며 비소가 주 오염원인 경북 달성 지역 소재 광산에서 밭토양을 채취하여 시험한 결과 비소의 경우 $FeSO_4\;+\;KMnO_4$, > 지올라이트 등의 순서로 좋은 효율을 보였으며 구리의 경우 영가철과 슬러지가 안정화 효율을 보였다. 황화철 혼합제재의 경우 대부분의 중금속들에 대해 가장 좋은 효율을 보임에도 용출 초기 pH 4정도의 산성으로 인해 중금속이 다량 용출되므로 pH를 조정하거나 전처리를 거칠 경우 안정화 효율이 증가할 것으로 판단된다. 컬럼은 시험 시작에 앞서 증류수로 72시간 이상 포화한 것과 사전에 포화과정 없이 바로 물을 흘려 넣은 두 조합을 동시에 운영하였으며 전자가 더 좋은 효율을 나타낸다. This study concerned remediation of heavy metal contaminated farmland soils near abandoned mine, using stabilization method, with particular emphasis on the remediating the soils contaminated with multi-elements. In this study, stabilizing heavy metals based on 'In-situ chemical fixation' has been applied to the soil collected from an abandoned mine in Korea, using column test, with various stabilizing agents, including $FeSO_4$, $KMnO_4$, sludge (collected from coal mine drainage treatment pond), zero-valent iron (ZVI), zeolite and $CaCO_3$. Sixty five-days operation of the flow-through columns yield $FeSO_4\;+\;KMnO_4$ and zeolite are efficient on reducing As leaching from the soil. ZVI and sludge are reducing the leaching of Cu. Although $FeSO_4\;+\;KMnO_4$ seem to be efficient for most heavy metals, high pH in the initial stage of test enabled high leaching of the heavy metals, whereas fixation of the heavy metals maintain throughout the rest of the test period, with increasing pH up to around 6. Addition of some alkaline agent may inhibit the low pH during the application. The column test was also run as two set: one set incubated with deionized water for 72 hours prior to starting the test, and the other without incubation. The incubated set demonstrated better stabilizing efficiency, indicating the potential optimized operation method.

우주개발과 진공기술의 응용

이상훈,서희준,유성연,Lee, Sang-Hoon,Seo, Hee-Jun,Yoo, Seong-Yeon 한국진공학회 2008 Applied Science and Convergence Technology Vol.17 No.4

진공이란 공간의 기체압력이 대기압보다 낮은 상태, 즉 분자밀도가 약 $2.5{\times}10^{19}$분자/$cm^3$ 보다 적은 상태를 의미하며, 극청정환경 제공, 단열효과, 입자의 장거리 비행가능, 증발과 승화작용, 안정된 플라즈마를 유지, 생화학 반응 억제, 우주환경 제공 등의 특성으로 인해 오늘날 전 산업분야 및 과학기술 분야에 응용이 되고 있다. 우주환경은 이러한 고진공 환경과 태양 복사열에 의한 고온 환경 및 극저온이 반복되는 가혹한 환경으로 특징지어지는데, 위성체는 지상에서 발사되어 우주궤도에 진입한 순간부터는 계속해서 우주환경에 노출된다. 위성체가 이러한 가혹한 우주환경에 노출될 경우 주요부품에 기능장애가 초래되기도 하며 이는 결국 임무의 실패로 이어지기도 한다. 따라서 위성체는 지상에서 우주환경시험을 거쳐 기능 및 작동상태를 점검해야 하며, 이를 위해서는 우주환경을 모사 할 수 있는 우주환경 모사장비가 필요하다. 우주환경모사장비라 함은 우주환경의 주특징인 고진공상태와 극저온 환경을 모사할 수 있는 지상장비를 말하며, 장비의 설계 및 제작에는 기본적으로 진공기술이 응용되게 된다. 본 논문에서는 한국항공우주연구원이 보유하고 있는 인공위성의 개발에 필수 장비인 우주환경모사장치들을 소개하고, 최근 발달된 국내 진공기술로 국산화 제작에 성공한 유효제원 ${\varphi}8m{\times}L10\;m$ 급의 대형열진공챔버를 통하여 우주개발에 응용되는 진공기술을 소개하고자 한다. Vacuum is any air or gas pressure less than a prevailing pressure in an environmental or, specifically, any pressure lower than the atmospheric pressure and is used by a wide variety of scientists and engineering - including clean environment, thermal insulation, very long mean free path, plasma, space simulation[1]. The space environment is characterized by such a severe condition as high vacuum, and very low and high temperature. Since a satellite will be exposed to such a space environment as soon as it goes into its orbit, space environmental test should be carried out to verify the performance of the satellite on the ground under the space environmental conditions. A general and widely used method to simulate the space environment is using a thermal vacuum chamber which consists of vacuum vessel and thermally controlled shroud. As indicated by name of vacuum chamber, the vacuum technology is applied to design and manufacture of the thermal vacuum chamber. This paper describe the vacuum technology which is applied to space business.

155 Mb/s BiCMOS 멀티플렉서-디멀티플렉서 소자

이상훈,김성진,Lee, Sang-Hoon,Kim, Seong-Jeen 한국통신학회 2003 韓國通信學會論文誌 Vol.28 No.1A

본 논문에서는 155 Mb/s급 멀티플렉서-디멀티플렉서를 단일소자로 설계하였다. 이 소자는 초고속 전송망의 전송노드 역할을 하는 2.5 Gb/s SDH 전송시스템에 적용되어 51 Mb/s의 병렬 데이터들을 155 Mb/s의 직렬 데이터로 다중화 하거나 155 Mb/s 직렬 데이터들을 51 Mb/s의 병렬 데이터로 역 다중화 하는 기능을 수행한다 소자의 저속부는 TTL로 접속되고 고속부는 100K ECL로 접속되며 0.7${\mu}m$BiCMOS gate array로 제작되었다 설계 제작된 소자는 180˚의 155 Mb/s 데이터 입력 phase margin을 가지며 출력 데이터 skew는 470ps, 소비전력은 2.0W 이하의 특성을 보인다. This paper describes the design of a 155 Mb/s multiplexer-demultiplexer chip. This device for a 2.5 Gb/s SDH based transmission system is to interleave the parallel data of 51 Mb/s into 155 Mb/s serial data output, and is to deinterleave a serial input bit stream of 155 Mb/s into the parallel output of 51 Mb/s The input and output of the device are TTL compatible at the low-speed end, but 100K ECL compatible at the high-speed end The device has been fabricated with a 0.7${\mu}m$ BiCMOS gate array The fabricated chip shows the typical phase margin of 180 degrees and output data skew less than 470 ps at the high-speed end. And power dissipation is evaluated under 2.0W.

수중충격파를 이용하여 충격고화와 반응합성으로 제조된 Ti₅Si₃ 금속간 화합물의 표면코팅 층의 특성에 관한 연구

이상훈,Lee, Sang-Hoon 한국분말야금학회 2008 한국분말재료학회지 (KPMI) Vol.15 No.2

The objective of the present study is to investigate the increase in the functional characteristics of a substrate by the formation of a thin coating layer. Thin coating layers of $Ti_5Si_3$ have high potential because $Ti_5Si_3$ exhibits high hardness. Shock induced reaction synthesis is an attractive fabrication technique to synthesize uniform coating layer by controlling the shock wave. Ti and Si powders to form $Ti_5Si_3$ using shock induced reaction synthesis, were mixed using high-energy ball mill into small scale. The positive effect of this technique is highly functional coating layer on the substrate due to ultra fine substructure, which improves the bonding strength. These materials are in great demand as heat resisting, structural and corrosion resistant materials. Thin $Ti_5Si_3$ coating layer was successfully recovered and showed high Vickers' hardness (Hv=1183). Characterization studies on microstructure revealed a fairly uniform distribution of powders with good interfacial integrity between the powders and the substrate.

재발성 거대 세포종의 치료

이상훈,김한수,장종범,이한구,Lee, Sang-Hoon,Kim, Han-Soo,Chang, Chong-Bum,Lee, Han-Koo 대한근골격종양학회 1999 대한골관절종양학회지 Vol.5 No.1

Between Sep. 1986 and Mar. 1996, twenty four patients with recurrent giant cell tumor of their long bones were treated and followed up for more than two years. We applied three different modalities for treatment: curettage with bone graft, curettage and packing with polymethylmethacrylate, wide excision with or without reconstruction. During the average 51.5 months after operation(24-97 months), two of three patients who underwent curettage with bone graft showed recurrence. Patients who underwent wide excision showed no recurrence. Five of fifteen patients who underwent curettage and packing with polymethylmethacrylate showed recurrence. Four of seven who showed recurrence were treated with reapplication of curettage and packing with polymethylmethacrylate. All four patients showed no recurrence, and two of them have been followed up for more than two years. We suggest that the curettage and packing with polymethylmethacrylate is an effective treatment modality of the recurrent giant cell tumor.

13.56 MHz RFID 시스템 설계 및 구현

이상훈,Lee, Sang-Hoon 한국융합신호처리학회 2008 융합신호처리학회 논문지 (JISPS) Vol.9 No.1

This paper presents a 13.56 MHz RFID reader that can be used as a door-lock system for smart home security. The RFID reader consists of a transmitter, a receiver, and a data processing block. To verify the operation of the developed RFID reader, we present both a PSPICE simulation for transmitter/receiver and a digital simulation for data processing block. In particular, a CRC block for error detection of received data and a Manchester decoding block for position detection of collided data are designed using VHDL. In addition, we applied a binary search algorithm for multi-tag anti-collision. The anti-collision procedure is carried out by PIC microcontroller on software. The experimental results show that the developed reader can provide the right multi-tag recognition. 본 논문에서는 지능형 홈 시큐리티의 도어록 시스템으로 사용될 수 있는 13.56 MHz RFTD(Radio Frequency IDentification) 시스템 설계 및 구현에 관한 내용을 다룬다. RFID는 리더와 태그 및 호스트 컴퓨터로 구성되는 시스템으로서, 리더와 태그간의 유도성 결합이나 전자기적 결합방식에 의해, 태그의 정보를 주고받는 비접촉 시스템이다. RFID 리더의 송신부, 수신부를 PSPICE를 이용해 설계하고 시뮬레이션을 통해 동작을 검증하였다. 아울러 에러 검출 모듈과 맨체스터 코딩 모듈은 VHDL 언어를 이용해 설계하고 시뮬레이션을 통해 동작을 검증하였다. 데이터 처리부의 충돌방지(Anti-collision) 기능은 별도의 컨트롤러를 사용하여 소프트웨어적으로 구현하였다. 구현된 시스템의 성능시험을 위해 5개의 RF 태그 환경에서 실험한 결과 데이터의 충돌 없이 모든 태그의 데이터를 올바르게 인식하였다.