http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Matlab/Simulink를 이용한 계통연계형 태양광발전 모델링
서훈철(H. C. Seo),윤영민(Y. M. Yoon),김선룡(S. R. Kim),이시봉(S. B. Lee) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.11
This paper introduces the modeling of grid-connected photovoltaic(PV) generation using Matlab/Simulink. The model is based on the equivalent circuit of the PV solar cell including the effects of solar irradiation and temperature changes. The PV arrays are mod리ed to be bulit up with the series/parallel combination of PV solar cell and are connected to the distribution system via an inverter. The simulation results show that the typical characteristics and outputs of the PV arrays are accurate.
정원지(W. J. Chung),정동원(D. W. Jung),김호종(H. J. Kim),윤영민(Y. M. Yoon) 한국정밀공학회 2006 한국정밀공학회 학술발표대회 논문집 Vol.2006 No.5월
This paper presents the robust design of gripper part for a high-speed LCD (Liquid Crystal Display) transfer system. In this paper, the 1st DOE (Design of Experiment) is conducted to find out main-effect factors for the design of gripper part. Thirty-six experiments are performed using ANSYS<SUP>ⓡ</SUP> and their results are statistically analyzed using MINITAB<SUP>ⓡ</SUP>, which shows that the factors, i.e., First-width, Second-width, Rec-width, and thickness of gripper part, are more important than other factors. The main effect plots shows that the maximum deflection and mass of gripper part are minimized by increasing First-width, Second-width, Rec-width and thickness. The 2nd DOE is conducted to obtain RSM (Response Surface Method) equation. The CCD (Central Composite Design) technique with four factors is used. Optimum design is conducted using the RSM equation. Genetic algorithm is used for optimal design. Six sigma robust design is conducted to find out a guideline for control range of design parameter. To obtain six sigma level reliability, the standard deviations of design parameters are shown to be controlled within 5% of average design value..
LCD 이송장치 Column 부의 식스 시그마 강건설계를 위한 연구
정동원(D. W. Jung),정원지(W. J. Chung),송태진(T. J. Song),방덕제(D. J. Bang),윤영민(Y. M. Yoon) 한국정밀공학회 2005 한국정밀공학회 학술발표대회 논문집 Vol.2005 No.10월
This research studied robust design of column part for LCD transfer system. 1<SUP>st</SUP> DOE(Design of Experiment)was conducted to find out main effect factors. 36 experiments were performed and their results were shows that the geometric parameters(Low-length, Side-length, Upper-thickness, Middle-thickness)are more important than other factors. The main effect plots shows that the maximum deflection of column is minimized with increasing Low-length, Side-length, underthickness and Middle-thickness. 2<SUP>nd</SUP> DOE was conducted to obtain RMS(Response Surface Method)equation 25 experiments were conducted. The CCD(Central Composite Design)technique with four factors were used. The coefficient of determination (R²) for the calculated RSM equation was 0.986. Optimum design was conducted using the RSM equation Multi-island genetic algorithm was used to optimum design. Optimum value for Low-length, Side-length, Upper-thickness and Middle-thickness were 299.8㎜, 180.3㎜, 21.7㎜, 21.9㎜ respectively. An approximate value of 5.054㎜ in deflection was expected to be a maximum under the optimum conditions. Six sigma robust design was conducted to find out guideline for control range of design parameter. To acquire six sigma level reliability, the standard deviation of design parameter should be controlled within 2% of average design value.
정원지(W. J. Chung),송태진(T. J. Song),정동원(D. W. Jung),방덕제(D. J. Bang),윤영민(Y. M. Yoon),김기현(K. H. Kim) 한국정밀공학회 2004 한국정밀공학회 학술발표대회 논문집 Vol.2004 No.10월
This research is that analyze multi-body system that have flexibility. We composed system consisted of crane, part of traveling and robot. And we analyzed the aspect of vibration when this system runs using ADAMS. Through this research we can analyze vibration and displacement of end-effect pill of the large size robot. And this research can become reference that is going to analyze resemblant dynamic system.