http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
선형액추에이터의 팀핑에 따른 구동력과 이동자 사이의 위상 변화
우병철(B.C. Woo),홍도관(D.K. Hong),김종무(J.M. Kim),장정환(J.H. Chang),강도현(D.H. Kang),박성제(S.J. Park) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.7
리니어 모터는 일반적으로 회전하는 모터와 같이 여러 형상의 극간에서 발생되는 힘의 균형에 의해서 구동되는 것이 일반적이다. 특히 하나의 극간에서 미소 구동하는 리니어 모터는 구동력과 실제 이동하는 위치 사이에서 댐핑이나 무게와 함 사이에서 발생하는 가속력의 차이에 의해서 주어진 힘의 파형과 움직이는 위치의 괴적이 만들어가는 이동자의 위치 사이에는 다소 시간 처짐이 발생하게 된다. 본 논문에서는 구동력과 실제 이동하는 위치 사이의 시간 처짐의 원인으로 알려져 있는 딤핑의 조건을 변화시키고 이에 다른 구동력의 변화를 알아보았다. 댐핑이 전형 없는 조건과 댐핑이 조금씩 증가함으로 인해서 주어진 시스템의 기계적 공진 영역에서 발생하는 여러 가지 구동특성을 정량적으로 평가해 보았다. 60[㎐]가 공진인 이동자와 탄성체로 이루어진 시스템에서 58-62[㎐]에서 구동될 경우 힘의 주파수와 가해진 힘에 다라 이동자의 초기 거동을 알아보았으며 초기 0.3초 구간에서 구동되는 특성을 알아보았다. 전체적으로 이동자의 구동 괴적과 주어진 힘의 파형 사이에서 발생하는 시간 처짐은 댐핑계수에 가장 지배적인 영향을 받았으며 구동 힘의 주파수가 공진주파수보다 작으면 점점 증가하고 크면 점점 감소하는 경향을 가지며 공진주파수의 구동력이 가해진다면 시간 처짐은 거의 변화가 없음을 알 수 있었다.
우병철(B.C. Woo),홍도관(D.K. Hong),강도현(D.H. Kang),김종무(J.M. Kim),장정환(J.W. Jang) 대한기계학회 2005 대한기계학회 춘추학술대회 Vol.2005 No.5
Linear actuator composed a linear motor, a controller, the oil feeder, the supported springs, the damper of compressing processor and so on. And linear compressor with simple and highly efficient mechanism is the best compressor in efficiency. Moreover cooling modulation feature dramatically enhanced the efficiency of the entire system. Rather than utilized a newly designed linear motor and springs, which enables direct transmission. In this paper, we develop transverse flux linear motor(TFLM) and examine characteristic of a linear actuator of TFLM. also we measure thrust force varying an input frequency and an current magnitude for TFLM and the variations of thrust force due to the friction force of linear motor guide have been experimented.
점탄성 물질을 포함한 이상 폴리머 유동 해석을 위한 그래픽 소프트웨어의 개발
우병철(B.C. Woo),김시조(S.J. Kim) 대한기계학회 2002 대한기계학회 춘추학술대회 Vol.2002 No.5
The prediction of the drop deformation of a dispersed two-phase polymer blends is very important in the<br/> industrial fields, especially in the polymer processing such as injection molding and extrusion.<br/> Very recently S. J. Kim has developed FEM computer codes for this problem^(12~14). With this source<br/> program, a new graphic software was developed to treat the pre, solver, post processing in the PC base by<br/> using OpenGl and MFC. In solving the system equations, an unstructured mesh generator and auto-remeshing<br/> technique were used to show the deformation shapes of drops under the application program window.<br/> The present application program shows the high performance to improve the two-phase solver algorithm<br/> and to simulate the two-phase polymeric flow.