RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        과산화 티타늄 복합체를 이용한 염료감응형 태양전지용 페이스트의 제조 및 열처리 온도에 따른 특성

        박현수,주소영,최준필,김우병,Park, Hyunsu,Joo, Soyeong,Choi, Joon-Phil,Kim, Woo-Byoung 한국분말야금학회 2015 한국분말재료학회지 (KPMI) Vol.22 No.6

        The organic binder-free paste for dye-sensitized solar cell (DSSC) has been investigated using peroxo titanium complex. The crystal structure of $TiO_2$ nanoparticles, morphology of $TiO_2$ film and electrical properties are analyzed by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Electrochemical Impedance Spectra (EIS), and solar simulator. The synthesized $TiO_2$ nanopowders by the peroxo titanium complex at 150, 300, $400^{\circ}C$, and $450^{\circ}C$ have anatase phase and average crystal sizes are calculated to be 4.2, 13.7, 16.9, and 20.9 nm, respectively. The DSSC prepared by the peroxo titanium complex binder have higher $V_{oc}$ and lower $J_{sc}$ values than that of the organic binder. It can be attributed to improvement of sintering properties of $TCO/TiO_2$ and $TiO_2/TiO_2$ interface and to formation of agglomerate by the nanoparticles. As a result, we have investigated the organic binder-free paste and 3.178% conversion efficiency of the DSSC at $450^{\circ}C$.

      • KCI우수등재

        IoT환경에서의 부하 균형을 이룬 네트워크 토폴로지 탐색

        박현수(Hyunsu Park),김진수(Jinsoo Kim),박무성(Moosung Park),전영배(Youngbae Jeon),윤지원(Jiwon Yoon) 한국정보과학회 2017 정보과학회논문지 Vol.44 No.10

        오늘날 복잡한 네트워크 망을 가지게 됨에 따라 네트워크 기기들의 자산식별은 관리 및 보안관점에서 중요한 사항으로 대두되고 있다. 이러한 자산들은 네트워크 망에 연결되어 있기 때문에 네트워크망 구조를 알아내고, 각 자산의 위치 및 연결 상태를 확인하는 것 또한 중요하다. 이는 네트워크 구조상의 취약점들을 밝혀내는데 사용되어지고, 이를 통하여 취약점을 보완할 수 있다. 하지만 적은 리소스를 가지는 사물인터넷의 네트워크 망에서는 네트워크 구조를 알아내기 위하여 모니터들이 보내는 Traceroute 패킷이 사물인터넷 기기들에게 과부하를 줄 수 있다. 이를 위하여 본 논문에서는 기존에 사용 되던 더블 트리 알고리즘을 효과적으로 발전시킴으로써 사물인터넷이 이루는 네트워크 망의 부하를 줄인다. 이러한 부하 균형을 이루기 위하여 이 논문에서는 새로운 목적지 매칭 알고리즘을 제시하고, 통계학적으로 현재 탐색하고 있는 경로와 가장 겹치지 않은 경로로 탐색을 시도한다. 이를 통해서 네트워크의 부하 균형을 이루고, 부가적으로 모니터의 리소스 사용을 균등하게 한다. With today"s complex networks, asset identification of network devices is becoming an important issue in management and security. Because these assets are connected to the network, it is also important to identify the network structure and to verify the location and connection status of each asset. This can be used to identify vulnerabilities in the network architecture and find solutions to minimize these vulnerabilities. However, in an IoT(Internet of Things) network with a small amount of resources, the Traceroute packets sent by the monitors may overload the IoT devices to determine the network structure. In this paper, we describe how we improved the existing the well-known double-tree algorithm to effectively reduce the load on the network of IoT devices. To balance the load, this paper proposes a new destination-matching algorithm and attempts to search for the path that does not overlap the current search path statistically. This balances the load on the network and additionally balances the monitor"s resource usage.

      • KCI등재

        Enzymatic Synthesis of Polyphenol Glycosides by Amylosucrase

        박현수(Hyunsu Park),최경화(Kyoung-Hwa Choi),박영돈(Young Don Park),박천석(Cheon-Seok Park),차재호(Jaeho Cha) 한국생명과학회 2011 생명과학회지 Vol.21 No.11

        재조합 아밀로수크라아제의 폴리페놀 배당체를 합성하는 능력을 검사하였다. 이 효소의 효소작용 특성에 근거하여 설탕을 기질로 사용하였으며 21 종류의 각기 다른 폴리페놀 화합물들이 수용체로 사용되었다. 당 전이 반응은 사용한 폴리페놀에 따라 하나 또는 두 개의 주요 폴리페놀 배당체를 합성하였다. 합성된 폴리페놀 배당체들은 박막 크로마토그래피법을 이용하여 확인되었고, 새로이 합성된 배당체의 구조는 당 전이 작용 특성에 근거하여 예측되었다. 수용체로 가능한 폴리페놀의 구조적 특징들이 평가되었으며, 이러한 결과는 Deinococcus geothermalis 유래 아밀로수크라아제가 식품, 화장품, 및 제약산업에서 높은 잠재성을 갖는 폴리페놀 배당체의 효소적 합성에 매우 효율적인 촉매로 활용될 수 있다는 것을 보여준다. The capability of synthesizing polyphenol glycosides was examined using recombinant amylosucrase from the hyperthermophilic bacterium Deinococcus geothermalis. Based on the action mode of amylosucrase, sucrose and twenty-one polyphenols were used as a donor and acceptors respectively. The transglycosylation reaction by amylosucrase produced one or two major polyphenol glycosides depending on the type of polyphenols used. The synthesized polyphenol glycosides were detected by thin-layer chromatography. The structures of the newly synthesized polyphenol glycosides were predicted based on the transglycosylation mechanism of the enzyme. According to the acceptability of the polyphenols, the structural characteristics of polyphenol as an efficient acceptor were evaluated. The results indicate that amylosucrase is an efficient catalyst for the enzymatic synthesis of polyphenol glycosides, which have high potentials in food, cosmetics, and pharmaceutical industries.

      • KCI등재

        벡터제어 유도전동기의 슬립 각속도를 이용한 회전자 저항 추정

        박현수(Hyunsu Park),조권재(Gwon-Jae Jo),최종우(Jong-Woo Choi) 대한전기학회 2018 전기학회논문지 Vol.67 No.10

        Accurate tuning of parameter is very important in vector-controlled induction motor. Among the parameters of induction motor, detuning of rotor resistance used in controller design deteriorates drive performance. This paper presents a novel rotor resistance estimation strategy using slip angular velocity in vector-controlled induction motor drives. The slip angular velocity can be calculated by two methods. Firstly, it can be induced from the rotor voltage equation. Secondly, it can be induced from the difference between synchronous angular velocity and rotor angular velocity. The first method includes the rotor resistance, while the second method dose not include this parameter. From this fact, the rotor resistance can be identified by comparing the slip angular velocities in the two methods. In the tuned states of the rotor resistance, performances of flux estimator and speed drive are discussed. The simulation and experimental results are given to verify the validity of the proposed method in various situations.

      • 겨울 밀에서의 파종 및 시비 처리에 따른 생육시기별 작황 분석

        박현수 ( Hyunsu Park ),청리광 ( Liguang Cheng ),오광스티븐 ( Stephen Okwang ),장태일 ( Taeil Jang ) 한국농공학회 2023 한국농공학회 학술대회초록집 Vol.2023 No.0

        국산밀 자급률은 1.4% 미만으로 식량안보에 취약한 실정으로 생산량 증가를 위한 겨울철부터 초여름 수확기까지 생육기간 전체에 체계적인 재배관리가 필요하다. 본 연구에서는 겨울 밀밭에서의 파종 및 시비 처리에 따른 생육시기별 작황을 평가하고자 한다. 시험포장은 전라북도 익산시 함라면에 위치하고 있으며, 처리구는 관개(ICT 기반 적정 관개의 유□무), 파종(광산파(관행) 및 세조파), 시비(추비 2회 유□무)의 처리 수준에 따라 총 8개로 구성하였으나 금년도의 경우 잦은 강우로 인하여 관개 처리구의 영향은 유의하지 못하여 종합적인 분석에서는 제외하였다. 파종 처리는 균일한 파종을 위한 작업기가 부착된 트랙터를 통해 경운 및 파종하였으며, 시비 처리는 드론을 활용해 균일한 추비를 2회 수행하였다. 밀 생육조사는 LAI, 지상부 건물중, 수확량 등 생육시기별로 수행하였다. 개화 2주 후(DAA14) 무처리구(대조구) 기준으로 LAI는 시비 124%, 파종 122%, 복합 134% 수준으로 나타났으며, 지상부 건물중은 시비 117%, 파종 116%, 복합 132% 수준으로 나타났다. 수확량은 무처리 1.12ton/ha, 시비 1.35ton/ha, 파종 1.39ton/ha, 복합 1.60ton/ha 순으로 나타났으며, 천립중은 무처리 24.1g, 시비 31.4g, 파종 31.7g, 복합 34.5g 순으로 수확량과 같은 경향을 보여주었다. DAA14까지의 생육인자들이 시비처리구에서 높게 나타나 추비가 밀의 초기 생육에 긍정적인 영향을 미친 것으로 평가되었으며, 수확량의 경우 파종처리구에서 비해 높게 나타나 세조파가 밀의 생산량 향상 및 안정적인 생산에 기여한 것으로 평가되었다. 본 연구는 국산밀 생산량 향상을 위한 생육단계 및 재배체계에 따른 기초 모니터링 연구로 향후 국내 밀 작황 진단 및 예측을 위한 디지털농업 모델 개발에 활용하고자 한다.

      • 밀 재배환경에 따른 식생지수를 이용한 수확량 평가

        박현수 ( Hyunsu Park ),청리광 ( Liguang Cheng ),김지상 ( Jisang Kim ),장태일 ( Taeil Jang ) 한국농공학회 2023 한국농공학회 학술대회초록집 Vol.2023 No.0

        국내 1인당 밀 소비량은 쌀 소비량의 49% 수준으로 높으나, 자급률은 1.4% 미만으로 수요 대비 공급이 부족한 실정이다. 생산량 증대를 위한 무인비행체 영상 등 최신 기술을 접목한 디지털농업 연구가 활발히 이루어지고 있으나, 국내 노지 밭작물 대상으로는 미비한 상황이다. 따라서 본 연구에서는 무인비행체 영상을 이용해 파종 및 시비 조건이 수확량에 미치는 영향을 평가하고자 한다. 대상 지역은 전라북도 익산시 함라면에 위치하고 있으며, 처리구는 관개(ICT 기반 적정 관개의 유□무), 파종(광산파(관행) 및 세조파), 시비(추비 2회 유□무)의 처리 수준에 따라 총 8개로 구성하였으나 금년도의 경우 잦은 강우로 인하여 관개 처리구의 영향은 유의하지 못하여 종합적인 분석에서는 제외하였다. 무인비행체 영상은 밀 생육기간인 1월 하순부터 6월 중순까지 총 7회 촬영하였으며, 식물체 엽록소에 반사되는 특성을 가진 NIR 파장을 조합으로 하는 5개(NDVI, NDRE, GNDVI, RVI, CVI)의 식생지수들을 산출하여 비교□평가하였다. 산출된 식생지수 값들의 분포를 기준으로 처리구당 10곳의 샘플링 지점을 선정하여 생육조사를 실시하였다. 식생지수와 실측 수확량을 기반으로 선형회귀를 통해 모형을 구축하였으며, 구축된 모형은 R<sup>2</sup>(Determine coefficient), RMSE(Root Mean Square Deviation)와 같은 성능평가 지표를 사용해 성능을 평가하였다. 향후 다양한 머신러닝 기법들을 통하여 모형의 성능을 보완해 파종 및 시비 처리에 따른 수확량을 평가하고자 한다. 또한, 본 연구는 국산밀 수량 증대에 적합한 재배환경 선정 및 평가를 위한 디지털농업 모델의 기초자료로 활용될 것으로 기대된다.

      • KCI등재

        Optimization of Glycosyl Aesculin Synthesis by Thermotoga neapolitana β-Glucosidase Using Response-surface Methodology

        Hyunsu Park(박현수),Young-Don Park(박영돈),Jaeho Cha(차재호) 한국생명과학회 2017 생명과학회지 Vol.27 No.1

        강한 항 염증 활성을 갖는 glycosyl aesculin이 Thermotoga neapolitana β-glucosidase의 당전이 활성을 통하여 aesculin을 수용체로 이용하여 합성되었다. 약 2 μg의 효소를 이용하여 반응표면분석법을 통한 주요 반응 매개변수들의 최적화가 시도되었다. 각 반응 변수들의 통계분석 결과 2차 다항식모델이 적용된 유의값(p<0.05)에 잘 맞았다. Aesculin과 다른 매개변수사이의 상호관계를 의미하는 반응표면곡선 그래프는 glycosyl aesculin의 수율이 주로 aesculin의 농도와 반응시간에 영향을 받음을 나타내었다. Glycosyl aesculin의 생산을 위한 반응최적조건은 aesculin의 농도 9.5 g/l, 온도 84℃, 반응시간 81분, 그리고 pH 8.2로 나타났으며, 이러한 조건하에서 효소반응시 61.7%의 전환율로 5.86 g/l 의 수율이 예상되었다. 실험을 통한 실질적인 수율은 6.02 g/l으로 나타났다. 실질적인 수율과 가까운 값을 예측 가능하다는 것을 통하여 반응표면분석법이 효소반응의 전환율을 최적화하는데 타당하다는 것이 입증되었다. 본 연구에서는 반응표면분석법을 활용하여 최적화 이전에 비하여 약 1.6배의 glycosyl aesculin을 얻을 수 있었다. 이러한 결과들은 반응표면분석법이 미생물유래 당화효소를 이용한 생물학적 활성을 갖는 배당체 합성의 생산 최적화에 효과적으로 활용할 수 있다는 것을 보여준다. Glycosyl aesculin, a potent anti-inflammatory agent, was synthesized by transglycosylation reaction, catalyzed by Thermotoga neapolitana β-glucosidase, with aesculin as an acceptor. The key reaction parameters were optimized using response-surface methodology (RSM) and 2 μg of the enzyme. As shown by a statistical analysis, a second-order polynomial model fitted well to the data (p<0.05). The response surface curve for the interaction between aesculin and other parameters revealed that the aesculin concentration and reaction time were the primary factors that affected the yield of glycosyl aesculin. Among the tested factors, the optimum values for glycosyl aesculin production were as follows: aesculin concentration of 9.5 g/l, temperature of 84℃, reaction time of 81 min, and pH of 8.2. Under these conditions, 61.7% of glycosyl aesculin was obtained, with a predicted yield of 5.86 g/l. The maximum amount of glycosyl aesculin was 6.02 g/l. Good agreement between the predicted and experimental results confirmed the validity of the RSM. The optimization of reaction conditions by RSM resulted in a 1.6-fold increase in the production of glycosyl aesculin as compared to the yield before optimization. These results indicate that RSM can be effectively used for process optimization in the synthesis of a variety of biologically active glycosides using bacterial glycosidases.

      • KCI등재

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼