http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Semi-active Vibration Drug Delivery Device Design using a Micro-needle Fabrication and Array
성연욱,박진호,이혜진,Sung, Yeon-wook,Park, Jean Ho,Lee, Hye-Jin Institute of Convergence Technology 2011 융ㆍ복합기술연구소 논문집 Vol.1 No.1
Transdermal drug delivery device is a method of drug delivery through the skin. Skin has a very large area, so it is attractive route to drug delivery. When drug delivery through the skin, microneedle has a advantage that painless, constant drug deliver and penetration efficient; nevertheless the cost is expensive because fabrication process need a particular equipment and not suitable in mass production. This study shows microneedle fabrication process using convergence of general MEMS process and dicing process that can make 3-D sharp microneedle tip and this fabrication process suitable for mass production.
소형 위성 영상안정화를 위한 능동형 광학 보정장치 설계
황재혁(Jai Hyuk Hwang),양지연(Ji Youn Yang),박진호(Jean Ho Park),조정빈(Jeong Bin Jo),강명수(Myoung Soo Kang),배재성(Jae Sung Bae) 한국항공우주학회 2015 韓國航空宇宙學會誌 Vol.43 No.5
본 논문에서는 소형 위성 카메라의 영상안정화를 위해 진동외란 보상 및 궤도상 광학정렬이 가능한 능동형 광학 보정장치의 설계에 대해 연구하였다. 능동형 광학 보정장치는 초점면부 보정장치와 부경 보정장치로 이루어져 있다. 초점면부 보정장치는 영상센서에 유입되는 진동 외란을 초점면부에서 직접 보상하는 장치이다. 또한 부경 보정장치는 초점면부 보정장치와 협력하여 궤도상에서 능동적으로 광학정렬을 수행할 수 있는 장치이다. 본 논문에서는 해상도 1 m급 소형 위성에 적용 가능한 능동형 광학 보정장치 설계를 위해 소형 고해상도 위성 카메라의 요구도를 분석하고, 진동 외란 보상과 궤도상 광학정렬이 능동적으로 가능하도록 초점면부 보정장치와 부경 보정장치의 요구도를 선정하였다. 선정된 요구도를 기준으로 본 연구에서 설계된 능동형 광학 보정장치는 초점면부에서 진동외란 보상 및 초점조절, 부경에서 틸트 및 디스페이싱 보상이 가능하므로 독립적으로 5축 제어가 가능한 시스템이다. This paper describes the design of the active optical compensation movements(at focal plane, secondary mirror) for the image stabilization of a small satellite camera. The movements can correct optical misalignment on-line and directly compensate vibration disturbances in the focal plane. Since the devices are installed inside the space camera, it has an remarkable advantage to deal with the structural deformation of a space camera effectively. In this paper, the requirements of the active optical compensation movements for 1m GSD small satellite camera have been analyzed. Based on the established requirements, the design of the active compensation movements have been conducted. The designed active optical compensation system can control 5 axes movements independently to compensate micro-vibration disturbances in the focal plane and to refocus the optical misaligned satellite camera.
소형위성 광학탑재체의 영상안정화를 위한 초점면부 보정장치의 실험적 모델링에 관한 연구
강명수(Myoung-Soo Kang),황재혁(Jai-Hyuk Hwang),배재성(Jae-Sung Bae),박진호(Jean-Ho Park) 한국항공우주학회 2015 韓國航空宇宙學會誌 Vol.43 No.8
본 논문에서는 소형 지구관측 위성의 광학카메라에 들어가는 미소진동을 보상하기 위한 초점면부 보정장치 시스템의 실험적 모델링을 수행하였다. 미소진동 외란을 보상하는 초점면부 보정장치의 구동기로 PZT 압전작동기를 적용하였다. 압전작동기는 히스테리시스 고유 특성을 갖게 되므로 보정장치 시스템의 정확한 수학적 모델링을 얻는데 어려움이 있다. 따라서 본 연구에서는 보정장치 시스템을 2차 선형시스템으로 가정하고 MATLAB의 시스템 식별 툴박스(System Identification Toolbox)를 이용하여 실험적으로 모델링을 수행하였다. 외란의 주파수 범위인 0~50㎐에서 응답 오차 10%를 만족하기 위해 단일 선형 모델로는 불가능하며 총 4개의 선형 모델이 필요하다. 각각의 모델은 0~50㎐ 입력범위를 4개의 구간으로 나눈 영역에서 실제 동역학을 잘 표현 하고 있다. 미소진동 외란의 보상은 입력주파수에 따라 모델 스위칭 기법을 적용한 초점면부 보정장치 제어를 통해 이루어진다. Mathematical modeling of focal plane compensation device in the small earth-observation satellite camera has been conducted experimently for compensation of micro-vibration disturbance. The PZT actuators are used as control actuators for compensation device. It is quite difficult to build up mathematical model because of hysteresis characteristic of PZT actuators. Therefore, the compensation device system is assumed as a 2nd order linear system and modeled by using MATLAB System Identification Toolbox. It has been found that four linear models of compensation device are needed to meet 10% error in the input frequency range of 0~50㎐. These models describe accurately the dynamics of compensation device in the 4 divided domains of the input frequency range of 0~50㎐, respectively. Micro-vibration disturbance can be compensated by feedback control strategy of switching four models appropriately according to the input frequency.