전극평형전위차 가스 센싱 메커니즘을 적용한 일산화탄소 소형 전위차센서의 특성 향상에 관한 연구

박준영,김지현,박가영,Park, Jun-Young,Kim, Ji-Hyun,Park, Ka-Young,Wachsman, Eric D. 한국세라믹학회 2010 한국세라믹학회지 Vol.47 No.1

Based on the differential electrode equilibria approach, potentiometric YSZ sensors with semiconducting oxide electrodes for CO detection are developed. To improve the selectivity, sensitivity and response-time of the sensor, our strategy includes (a) selection of an oxide with a semiconducting response to CO, (b) addition of other semiconducting materials, (c) addition of a catalyst (Pd), (d) utilization of combined p- and n-type electrodes in one sensor configuration, and (e) optimization of operating temperatures. Excellent sensing performance is obtained by a novel device structure incorporating $La_2CuO_4$ electrodes on one side and $TiO_2$-based electrodes on opposite substrate faces with Pt contacts. The resulting response produces additive effects for the individual $La_2CuO_4$ and $TiO_2$-based electrodes voltages, thereby realizing an even higher CO sensitivity. The device also is highly selective to CO versus NO with minor sensitivity for NO concentration, compared to a notably large CO sensitivity.

Apoptotic Effect of Co-Treatment with Valproic Acid and 17AAG on Human Osteosarcoma Cells

박준영,박세진,김인령,박봉수,정성희,고명연,안용우,Park, Jun-Young,Park, Se-Jin,Kim, In-Ryoung,Park, Bong-Soo,Jeong, Sung-Hee,Ko, Myung-Yun,Ahn, Yong-Woo Korean Academy of Orofacial Pain and Oral Medicine 2011 Journal of Oral Medicine and Pain Vol.36 No.1

Valproic acid (VPA) is a well-known anticonvulsive agent and has been used in the treatment of epilepsy for almost 30 years. VPA emerged in 1997 as an antineoplastic agent. And it is known that antitmor activity of VPA is associated with its targeted at histone deacetylases. 17AAG, Inhibition of HSP90 leads to the proteasome degradation of the HSP90 client proteins, such as Akt, Raf/Ras, Erk, VEGF, cyclin D and p53, and causes potent antitumor activity. It is reported that 17AAG-induced HSP90 inhibition results in prevention of cell proliferation and induction of apoptosis in several types of cancer. This study was undertaken to investigate the synergistic apoptotic effect of co-treatment with the histone deacetylases inhibitor, VPA and the HSP90 inhibitor, 17AAG on human osteosarcoma (HOS) cells. Cell viability was evaluated by trypan-blue exclusion. Induction and augmentation of apoptosis were confirmed by Hoechst staining, flow cytometry (DNA hypoploidy and MMP change), Westen blot analysis and immunofluorescent staining. In this study, HOS cells co-treated with VPA and 17AAG showed several lines of apoptotic manifestation such as nuclear condensations, the reduction of MMP, the decrease of DNA content, the release of cytochrome c into cytosol, the translocation of AIF onto nuclei, and activation of caspase-3, caspase-7 and PARP whereas each single treated HOS cells did not. Although the single treatment of 1 mM VPA or 0.5 ${\mu}M$ 17AAG for 48 h did not induce apoptosis, the co-treatment with them induced prominently apoptosis. Therefore our data in this study provide the possibility that combination therapy with VPA and 17AAG could be considered as a novel therapeutic strategy for human osteosarcoma.

상시 교량 모니터링을 위한 저전력 IoT 센서 및 클라우드 기반 데이터 융합 변위 측정 기법 개발

박준영,신준식,원종빈,박종웅,박민용,Park, Jun-Young,Shin, Jun-Sik,Won, Jong-Bin,Park, Jong-Woong,Park, Min-Yong 한국전산구조공학회 2021 한국전산구조공학회논문집 Vol.34 No.5

It is important to develop a digital SOC (Social Overhead Capital) maintenance system for preemptive maintenance in response to the rapid aging of social infrastructures. Abnormal signals induced from structures can be detected quickly and optimal decisions can be made promptly using IoT sensors deployed on the structures. In this study, a digital SOC monitoring system incorporating a multimetric IoT sensor was developed for long-term monitoring, for use in cloud-computing server for automated and powerful data analysis, and for establishing databases to perform : (1) multimetric sensing, (2) long-term operation, and (3) LTE-based direct communication. The developed sensor had three axes of acceleration, and five axes of strain sensing channels for multimetric sensing, and had an event-driven power management system that activated the sensors only when vibration exceeded a predetermined limit, or the timer was triggered. The power management system could reduce power consumption, and an additional solar panel charging could enable long-term operation. Data from the sensors were transmitted to the server in real-time via low-power LTE-CAT M1 communication, which does not require an additional gateway device. Furthermore, the cloud server was developed to receive multi-variable data from the sensor, and perform a displacement fusion algorithm to obtain reference-free structural displacement for ambient structural assessment. The proposed digital SOC system was experimentally validated on a steel railroad and concrete girder bridge. 사회기반 시설물의 노후화에 대응해 이상 징후를 파악하고 유지보수를 위한 최적의 의사결정을 내리기 위해선 디지털 기반 SOC 시설물 유지관리 시스템의 개발이 필수적인데, 디지털 SOC 시스템은 장기간 구조물 계측을 위한 IoT 센서 시스템과 축적 데이터 처리를 위한 클라우드 컴퓨팅 기술을 요구한다. 본 연구에서는 구조물의 다물리량을 장기간 측정할 수 있는 IoT센서와 클라우드 컴퓨팅을 위한 서버 시스템을 개발하였다. 개발 IoT센서는 총 3축 가속도 및 3채널의 변형률 측정이 가능하고 24비트의 높은 해상도로 정밀한 데이터 수집을 수행한다. 또한 저전력 LTE-CAT M1 통신을 통해 데이터를 실시간으로 서버에 전송하여 별도의 중계기가 필요 없는 장점이 있다. 개발된 클라우드 서버는 센서로부터 다물리량 데이터를 수신하고 가속도, 변형률 기반 변위 융합 알고리즘을 내장하여 센서에서의 연산 없이 고성능 연산을 수행한다. 제안 방법의 검증은 2개소의 실제 교량에서 변위계와의 계측 결과 비교, 장기간 운영 테스트를 통해 이뤄졌다.

Interstitial Pneumonitis를 동반한 Sj$\ddot{o}$gren's 증후군 1예

박준영,이규락,이상무,김현태,어수택,정연태,김용훈,박춘식,진소영,Park, Jun-Young,Yi, Kyu-Rak,Lee, Sang-Moo,Kim, Hyeon-Tae,Uh, Soo-Taek,Chung, Yeon-Tae,Kim, Yong-Hun,Park, Choon-Sik,Jin, So-Young 대한결핵및호흡기학회 1992 Tuberculosis and Respiratory Diseases Vol.39 No.4

Sj$\ddot{o}$gren's syndrome (SS) is an immunologic disorder characterized by progressive destruction of the exocrine glands due to infiltration of lymphocyte resulting in mucosal and conjunctival dryness accompanied by a variety of autoimmune phenomena. And SS is divided into primary and secondary by accompanying collagen vascular diseases. In Korea, only a few cases of primary SS and primary SS with interstitial pneumonitis have been documented. Recently we experinced a suspected case of primary SS with interstitial pneumonitis diagnosed by sublabial and open lung biopsy, Schirmer's test and slit lamp test.

회원작품 - 목은재(木隱齋)

박준영,Park, Jun-Young 대한건축사협회 2009 建築士 Vol.2009 No.6

[¹¹C]아세트산의 방사화학적 수율 증가를 위한 연구

박준영,손정민,Park, Jun Young,Son, Jeongmin 대한핵의학기술학회 2018 핵의학 기술 Vol.22 No.2

본 연구는 그리냐르 시약과 $[^{11}C]$$CO_2$ 가스의 반응온도를 최적화하여 $[^{11}C]$아세트산의 방사화학적 수율을 향상시킬 수 있는 방법을 개발하고자 하였다. 본 연구에서는 $TRACERlab^{TM}$ $FX_{C-Pro}$ 자동합성장치에 기체포집 반응법과 고체상 추출 카트리지 분리정제법을 적용하여 $[^{11}C]$아세트산을 합성하였다. 그리냐르 시약으로 3.0 M $CH_3MgCl$를 사용하였으며, 표지반응 시 무수 tetrahydrofuran을 사용하여 0.5 M $CH_3MgCl$로 희석하여 사용하였다. 사이클로트론에서 생산된 $[^{11}C]$$CO_2$ 가스를 포집 후 반응용기에 담겨있는 그리냐르 시약에 불어넣을 때 반응용기를 액체질소로 냉각하여 $0^{\circ}C$, $-10^{\circ}C$, $-55^{\circ}C$가 각각 되게 한 후 표지반응을 진행하였다. 표지 반응 후 1 mM 아세트산 용액을 넣어 반응액을 희석한 후 고체상 추출 카트리지 IC-H와 IC-Ag를 차례로 통과시켜 불순물을 제거하고, 최종산물인 $[^{11}C]$아세트산은 SAX 카트리지에 통과시켜 흡착시킨 후 주사용수를 통과시켜 유기용매 및 불순물을 제거한 후 생리식염수로 용출하였다. 용출된 $[^{11}C]$ 아세트산은 $0.22-{\mu}m$ 멸균필터를 사용하여 멸균 후 HPLC로 방사화학적 순도를 측정하였다. 사이클로트론의 빔 전류를 $50{\mu}A$로 고정하고 빔 조사를 20분간 하여 생산된 $[^{11}C]$$CO_2$ 가스를 그리냐르 시약과 반응시킬 때 온도가 $0^{\circ}C$일 때 $15.2{\pm}1.6GBq$ (n=5)의 $[^{11}C]$아세트산이 합성되었고, 표지반응온도가 $-10^{\circ}C$일 때는 $18.7{\pm}2.1GBq$ (n=19)가 합성되었으며, $-55^{\circ}C$일 때는 $7.7{\pm}1.7GBq$ (n=19)가 합성되었다. 방사화학적 수율이 가장 높았던 $-10^{\circ}C$에서 빔 조사시간에 따른 $[^{11}C]$ 아세트산의 합성수율을 비교하였을 때 10분간 빔을 조사할 때보다 20분간 조사할 경우 약 1.9배 생산량이 증가하는 것을 확인할 수 있었다. 본 연구를 통해 $[^{11}C]$$CO_2$ 가스와 그리냐르 시약을 $-10^{\circ}C$에서 반응 할 경우 방사화학적 수율을 크게 개선할 수 있어 향후 임상에서 통상적으로 생산 시 유용한 표지조건으로 활용될 수 있을 것이라 기대된다. Purpose $[^{11}C]$acetate has been proved useful in detecting the myocardial oxygen metabolism and various malignancies including prostate cancer, hepatocellular carcinoma, renal cell carcinoma and brain tumors. The purpose of study was to improve the radiosynthesis yield of $[^{11}C]$acetate on a automated radiosynthesis module. Materials and Methods $[^{11}C]$acetate was prepared by carboxylation of grignard reagent, methylmagnesium chloride, with $[^{11}C]$$CO_2$ gas, followed by hydrolysis with 1 mM acetic acid and purification using solid phase extraction cartridges. The effect of the reaction temperature ($0^{\circ}C$, $10^{\circ}C$, $-55^{\circ}C$) and cyclotron beam time (10 min, 15 min, 20 min, 25 min) on the radiosynthesis yield were investigated in the $[^{11}C]$acetate labeling reaction. Results The maximum radiosynthesis yield was obtained at $-10^{\circ}C$ of reaction temperature. The radioactivities of $[^{11}C]$acetate acquired at $-10^{\circ}C$ reaction temperature was 2.4 times higher than those of $[^{11}C]$acetate acquired at $-55^{\circ}C$. Radiosynthesis yield of $[^{11}C]$acetate increased with increasing cyclotron beam time. Conclusion This study shows that radiosynthesis yield of $[^{11}C]$acetate highly dependent on reaction temperature. The best radiosynthesis yield was obtained in reaction of grignard reagent with $[^{11}C]$$CO_2$ at $-10^{\circ}C$. This radiolabeling conditions will be ideal for routine clinical application.

압전효과를 이용한 압인방식의 휴대용 피부탄력 측정장치

박준영,김명남,Park, Jun-Young,Kim, Myoung Nam 한국멀티미디어학회 2022 멀티미디어학회논문지 Vol.25 No.9

In this paper, we proposed and developed a new portable skin elasticity measuring device based on the indentation method using piezoelectric effect. The proposed device is designed to minimize the uncertainty caused by the layer structure of the skin when measuring the elasticity of the skin. And, we developed a piezoelectric-based thin-film pressure sensor that can measure quantitatively and quickly during repeated measurement as a device sensor. To confirm the effectiveness of the proposed measuring device, it was compared with the experimental results of the conventional measuring devices under the same experimental conditions, and statistical correlation analysis was performed between the experimental data of the proposed measuring device and the experimental data of the conventional measuring devices. As a result of the correlation analysis, it was confirmed that the proposed measuring device had a high correlation with the conventional measuring devices. Therefore, it was confirmed that the proposed skin elasticity measuring device was effective.

타우 PET영상을 위한 ¹⁸F-THK5351의 표지방법 개발

박준영,손정민,전중현,Park, Jun-Young,Son, Jeong-Min,Chun, Joong-Hyun 대한핵의학기술학회 2018 핵의학 기술 Vol.22 No.1

본 연구는 타우 PET용 방사성의약품으로 개발된 $^{18}F-THK5351$의 임상적용을 위하여 상용화된 자동 합성장치에 적용한 표지방법을 개발하고자 하였다. $^{18}F-THK5351$의 표지법 개발은 HPLC 분리정제 전 표지반응물의 유기용매, 불순물 및 미반응 물질을 제거하기 위해 고체상 추출 카트리지를 사용하여 정제하는 과정을 포함한 방법(method I)과 전처리 정제과정을 포함하지 않은 방법(method II)으로 나누어 진행하였다. $^{18}F-THK5351$ 표지는 $Sep-Pak^{(R)}$ QMA 카트리지를 사용하여 흡착한 불소-18 음이온을 $K_{2.2.2}/K_2CO_3$으로 용출한 후 $100^{\circ}C$에서 진공상태와 헬륨의 흐름하에 건조한 후 표지 전구체와 $110^{\circ}C$에서 10분간 반응시켰다. 반응 후 1 N HCl을 첨가하여 보호기를 제거한 후 0.8 M $CH_3COOK$를 사용하여 표지 반응물을 중화하였다. 이후 전처리 정제의 유무에 따라 method I과 method II로 진행하였다. Method I에서 전처리 정제 과정의 최적화를 위해 $Sep-Pak^{(R)}$ tC18과 $Oasis^{(R)}$ HLB 고체상 추출 카트리지를 사용하여 비교한 결과 $Sep-Pak^{(R)}$ tC18 카트리지는 57.2%의 표지 반응물이 빠져 나갔고, $Oasis^{(R)}$ HLB 카트리지는 40.6%의 표지 반응물이 빠져나가는 것을 확인할 수 있었다. Method I 표지방법의 방사화학적 수율은 $23.8{\pm}1.9%$(decay-corrected, n=4) 이었고, method II 표지방법의 방사화학적 수율은 $31.9{\pm}6.7%$(decay-corrected, n=10) 이었다. 본 연구를 통해 전처리 정제과정을 거쳐 HPLC로 분리정제하는 방법과 전처리 정제과정을 거치지 않고 표지반응물을 바로 HPLC 정제하는 표지방법을 상용화된 자동합성장치를 사용하여 성공적으로 개발하였다. 하지만 전처리 정제과정을 포함한 표지방법은 표지반응물의 손실이 많아 방사화학적 수율이 낮아지는 단점을 발견하였다. 본 연구에서 개발된 전처리 정제과정이 생략된 $^{18}F-THK5351$의 표지방법은 향후 통상적으로 생산 시 보다 유용한 표지방법으로 사용될 것으로 기대된다. Purpose $^{18}F-THK5351$ is the newly developed PET probe for tau imaging in alzheimer's disease. The purpose of study was to establish the automated production of $^{18}F-THK5351$ on a commercial module. Materials and Methods Two different approaches were evaluated for the synthesis of $^{18}F-THK5351$. The first approach (method I) included the nucleophilic $^{18}F$-fluorination of the tosylate precursor, subsequently followed by pre-HPLC purification of crude reaction mixture with SPE cartridge. In the second approach (method II), the crude reaction mixture was directly introduced to a semi-preparative HPLC without SPE purification. The radiosynthesis of $^{18}F-THK5351$ was performed on a commercial GE $TRACERlab^{TM}$ $FX-_{FN}$ module. Quality control of $^{18}F-THK5351$ was carried out to meet the criteria guidelined in USP for PET radiopharmaceuticals. Results The overall radiochemical yield of method I was $23.8{\pm}1.9%$ (n=4) as the decay-corrected yield (end of synthesis, EOS) and the total synthesis time was $75{\pm}3min$. The radiochemical yield of method II was $31.9{\pm}6.7%$ (decay-corrected, n=10) and the total preparation time was $70{\pm}2min$. The radiochemical purity was>98%. Conclusion This study shows that method II provides higher radiochemical yield and shorter production time compared to the pre-SPE purification described in method I. The $^{18}F-THK5351$ synthesis by method II will be ideal for routine clinical application, considering short physical half-life of fluorine-18 ($t_{1/2}=110min$).

탄산화 건자재 제조를 위한 석탄 비산회의 탄산화

박준영,김유택,김현정,Park, Jun-Young,Kim, Yoo-Taek,Kim, Hyun-Jung 한국결정성장학회 2012 한국결정성장학회지 Vol.22 No.3

이산화탄소($CO_2$)를 폐기물에 안정하게 고정화시키기 위하여 탄산화 가능한 알칼리 토금속인 Ca와 Mg 성분을 다량 포함한 석탄재에 CO2를 저장하여 건자재의 제조 가능성을 연구하였다. 초기 실험으로는 Ca 산화물과 수화물을 사용하였으며, $CO_2$ 저장 반응기로는 Autoclave를 사용하여 일정한 압력과 온도에서 조성을 변화시켜 탄산화를 시행하였다. 탄산화 된 시편의 무게변화율, X-선 회절분석 및 시차열분석을 통하여 관찰한 결과 $Ca^{2+}$의 이온용출 반응에 의해 탄산화가 진행되었음을 확인할 수 있었다. 10 $kgf/cm^2$의 압력과 $120^{\circ}C$에서 10분간 온도를 유지한 분위기에서 폐기물자원 원료에 15 % 이상의 탄산화율을 얻는 것이 가능할 것으로 판단되었다. Carbon dioxide ($CO_2$) could be stored in the form of Ca and Mg compounds including alkaline earth metal by carbonation. The possibility of $CO_2$ storage was tested by using desulfurized ash from fluidized bed type boiler as raw material. Autoclave was used for maintaining the reaction pressure and temperature for the carbonation. The analysis of weight change rate, XRD, and TG/DTA proved that more than 15 % of carbonation rate was obtained under 10 $kgf/cm^2$ and $120^{\circ}C$-10 min.

전자사진 기술을 사용하는 이미징 장치의 에너지 효율 기준 연구

박준영,윤원식,Park, Jun-Young,Yoon, Wonsik 한국정보통신학회 2014 한국정보통신학회논문지 Vol.18 No.10

본 논문에서는 전자사진 기술을 이용하는 프린터, 복사기, 팩시밀리, 복합기 등과 같은 이미징 장치의 효율등급기준에 대한 연구를 수행하였다. 대기전력을 관리하고 있는 현 제도의 문제점을 파악하고 효율관리 필요성을 제안하였으며, 이를 위한 효율 기준을 국내 대기전력저감 프로그램에 등록된 실증 데이터를 기반으로 개발하였다. 효율부여지표를 찾기 위해 상관분석(Correlation Analysis)을 실시하였으며, 인쇄 속도가 가장 큰 상관계수(Correlation Coefficient)를 가짐을 확인하였다. 이를 적용한 복합기, 프린터에 대한 1~5 등급의 효율등급 기준과 에너지 프론티어 기준을 도출하였으며, 정책반영 시 연간 약 650 억 원의 에너지 비용을 절감할 것으로 기대한다. In this paper, an efficiency grade standard for imaging equipments using electrophotograph printing such as a printer, copier, fax, and MFD (Multi Function Device) is studied. By emphasizing domestic standby power reduction program's problem, and proposing the necessity of efficiency management, the efficiency standard is developed by reliable data registered in domestic standby power reducing program. To find an efficiency indication for grade, correlation analysis is used and as a result, printing speed has the biggest correlation coefficient. By applying the efficiency indication for grade, the proposed certification standard is established in 1st to 5th level products and super-high-efficiency product (energy frontier) which is better than 1st to 5th level products. If these efficiency standards are chosen by government policies, it is expected to save 65 billion won reduction of energy cost per year.