http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박철환(Chulwhan Park),박의섭(Eui-Seop Park),신중호(Joong-Ho Synn) 한국암반공학회 2007 터널과지하공간 Vol.17 No.6
본 기술보고서는 Lisbon에서 개최된 2007 ISRM Congress 에서 발표된 논문을 소개한 것이다. 이는 SRM(합성암반체)에 관한 연구결과이며, 이의 중요성과 향후 잠재력을 강조하고 있는 Fairhurst 교수가 직접 발표한 논문 이다. 절리 암반의 특성을 규명하는 SRM 접근법은 현존하는 경험적 접근법이나 절리 암반의 거동에 대한 현재의 이해정도와 관련지어 재검토된다. 이 재검토 논문에서 절리 암반의 역학적 거동에 영향을 미치는 주요 요소들이 어떻게 고려되는가를 기술하며, 또 SRM 접근법이 상당히 발전되어 현장에 적용된, 사례를 보여준다. PFC-3D에서 BP 모델링과 DFN 모사법 등의 두개의 잘 정립된 방법에 기초를 두고 있는 이 기법은 새로운 미끄러지는 절리모델을 사용한다. 이 모델은 모든 응력경로에 의해 힘을 받고 있는 수천개의 기존 절리를 포함하는 대규모 암반체를 모사할 수 있게 하는 것이다. 암반의 강도 및 취성도, 완전 순응 행렬의 전개, 그리고 초기의 파쇄 등이 SRM 시험에서 얻어지는 결과이다. This technical report is to introduce the research on SRM (Synthetic Rock Mass) which was presented in 2007 ISRM Congress at Lisbon by Prof. Fairhurst who speak with emphasis on its importance and potential in rock engineering. The Synthetic Rock Mass approach to jointed rock mass characterization (Pierce et al. 2007) is reviewed relative to existing empirical approaches and current understanding of jointed rock mass behaviour. The review illustrates how the key factors affecting the mechanical behaviour of jointed rock masses may be considered and demonstrates that the SRM approach constitutes a significant step forward in this field. This technique, based on two well-established methods, Bonded Particle Modelling in PFC-3D (Potyondy and Cundall, 2004) and Discrete Fracture Network simulation, employs a new sliding joint model that allows for large rock volumes containing thousands of pre-existing joints to be subjected to any non-trivial stress path. Output from SRM testing includes rock mass brittleness and strength, evolution of the full compliance matrix and primary fragmentation.
균열 암반에서의 HydroDFN 모델 해석을 이용한 등가블록투수계수의 계산
김형목(Hyung-Mok KIM),류동우(Dong-Woo RYU),박의섭(Eui-Seop PARK),신희순(Hee-Soon SHIN),田中達也(Tatsuya TANAKA) 한국암반공학회 2007 터널과지하공간 Vol.17 No.3
본 연구에서는 시추공 조사 결과를 바탕으로 수리지질학적 모델 구축과정에 요구되는 해석과정의 체계화 및 고도화의 일환으로 균열 암반에서의 조사 시추공을 통해 얻어진 균열 정보로부터 지하수 유동경로를 제공하는 구조 (Water Conducting Feature, WCF)를 선별하고, 선별된 WCF 정보를 이용하여 HydroDFN 모델을 구축하였다. HydroDFN 모델 내부를 세분한 정육면체 블록에서의 등가투수계수를 계산하고, 계산된 등가블록 투수계수는 시추공 투수시험 결과와 비교함으로써 구축된 HydroDFN 모델의 검증에 이용하였다. 이러한 해석과정을 통해 투수량 계수 등으로 대표되는 WCF 파라미터의 설정 및 수리지질학적 모델 구축시의 효과적인 방안을 제안하였다. In this paper, it was aimed to enhance core processes required in establishing hydrogeological models constructed using borehole investigation results. Water Conducting Feature (WCF) information was extracted from borehole investigation, and HydroDFN model was constructed based on the WCF information. The HydroDFN model was sub-divided by cubic blocks, and equivalent permeability of each sub-divided block was calculated and compared with the results of hydraulic test at the borehole. Through these analysis processes, suggestion for identifying and prescribing WCF parameters in the construction of HydroDFN model was made.