http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
류호정,김희영,김동현,Ryu, Ho-Jeong,Kim, Hee-Young,Kim, Dong-Hyun The Institute of Electronics and Information Engin 2011 電子工學會論文誌-SC (System and control) Vol.41 No.4
Charge transfer through DNA oligonucleotides has been investigated for potential applications of DNA into molecular electrooptic switching devices. Electrons were injected using gold electrode probes where DNA oligomers were adsorbed that are separated in medium. The results show that increased adsorption of DNA reduces the ionization current due to the combined effect of charge transfer through DNA and surface-limited charge transport. The probe-based charge injection was extended to examine the capability of extinguishing fluorescence of Cy3 dye molecules attached to DNA. It is expected that the results may be employed to implementing a novel electrooptic switching device based on DNA molecules. 본 논문에서는 DNA 올리고뉴클리오타이드(oligonucleotide)를 통한 전하 이동을 기반으로 하는 분자성 전자광학 스위칭 소자를 제시한다. DNA 올리고머(oligomer)가 흡착되어 있는 금전극에 전자들이 주입되어 전극으로부터 DNA 올리고머로 전하가 흘러가게 하고 이 전하의 이동도를 광학적 스위칭으로 확인할 수 있도록 제안되었다. DNA 올리고머의 흡착량이 증가함에 따라 DNA를 통한 전하의 이동성과 전극 표면에서의 전하전달 제한성으로 인해 전리전류는 감소하였다. DNA의 끝단에 합성된 Cy3 형광 분자의 점멸도를 전극 기반의 전하 주입법을 이용하여 확인하였다. 이러한 결과들은 DNA 올리고머를 이용한 새로운 분자성 전자광학 스위칭 소자에 이용될 수 있다.
보문: 미립지공학·유동층·기후변화대응기술·연료전환기술 ; 연소기체로부터 CO2를 포집하는 기포 유동층 공정에 관한 모델
최정후 ( Jeong Hoo Choi ),윤필상 ( Pil Sang Youn ),김기찬 ( Ki Chan Kim ),이창근 ( Chang Keun Yi ),조성호 ( Sung Ho Jo ),류호정 ( Ho Jung Ryu ),박영철 ( Young Cheol Park ) 한국화학공학회 2012 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.50 No.3
본 연구는 연소기체로부터 CO2 기체를 포집하는 기포 유동층 흡착 및 재생 반응기 공정의 주요 운전변수의 영향을 조사하기 위해서 단순화된 공정모델을 개발하였다. 반응속도와 반응기에서 고체입자의 평균체류시간을 이용하여 흡착 탑과 재생탑에서 각 반응 전환율을 계산하였다. 실험실 규모 기포 유동층 공정에 적용하여 CO2 포집효율에 대한 온도, 기체유속, 고체순환속도, 연소기체 중 수분농도의 영향을 조사하였다. CO2 포집효율은 흡착탑의 온도 혹은 유속이 증가 함에 따라서 감소하였다. 그러나 연소기체의 수분농도 혹은 재생탑의 온도가 증가함에 따라서 증가하였다. 계산된 CO2 포집효율은 측정값과 잘 일치하였다. 그러나 본 모델은 CO2 포집효율에 대한 고체순환속도의 영향과 잘 일치하지 않 았다. 이의 해석을 위해서는 기체-고체 접촉효율에 대한 이해가 더 필요하였다. This study developed a simple model to investigate effects of important operating parameters on performance of a bubbling-bed adsorber and regenerator system collecting CO2 from flue gas. The chemical reaction rate was used with mean particles residence time of a reactor to determine the extent of conversion in both adsorber and regenerator reactors, Effects of process parameters - temperature, gas velocity, solid circulation rate, moisture content of feed gas - on CO2 capture efficiency were investigated in a laboratory scale process, The CO2 capture efficiency decreased with increasing temperature or gas velocity of the adsorber. However, it increased with increasing the moisture content of the flue gas or the regenerator temperature. The calculated CO2 capture efficiency agreed to the measured value reasonably well. However the present model did not agree well to the effect of the solid circulation rate on CO2 capture efficiency. Better understanding on contact efficiency between gas and particles was needed to interpret the effect properly.