http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
RF 스퍼터링 시스템을 이용하여 증착한 비정질 Ga<sub>2</sub>O<sub>3</sub> 박막의 급속 열처리 조건에 따른 결정성과 광학적 특성 변화
김형민,박상빈,홍정수,김경환,Hyungmin Kim,Sangbin Park,Jeongsoo Hong,Kyunghwan Kim 한국전기전자재료학회 2023 전기전자재료학회논문지 Vol.36 No.6
The Ga<sub>2</sub>O<sub>3</sub> thin films were deposited using an RF sputtering system and the effect of crystallographic and optical properties under rapid thermal annealing conditions on Ga<sub>2</sub>O<sub>3</sub> thin film was evaluated. A rapid thermal annealing method can fabricate a crystalline Ga<sub>2</sub>O<sub>3</sub> thin film which is applied to various fields with a low cost and a high efficiency compared with the conventional post-annealing method. In this study, the Ga<sub>2</sub>O<sub>3</sub> treated at 900℃ for 1 min showed the beta and gamma phases in XRD measurement. In optical properties, the crystalline Ga<sub>2</sub>O<sub>3</sub> represented a high transmittance of more than 80% in the visible region and was calculated with a high optical bandgap energy of 4.58 eV. The beta and gamma phases Ga<sub>2</sub>O<sub>3</sub> can be obtained by adjusting the rapid thermal annealing temperatures, and the various properties such as the optical bandgap energy can be controlled. Moreover, it is expected that crystalline Ga<sub>2</sub>O<sub>3</sub> can be applied to various devices by controlling not only temperature but process time.
김형민,함건희,서병태,Kim, Hyungmin,Ham, Geonhee,Seo, Byungtae 한국통계학회 2016 응용통계연구 Vol.29 No.7
혼합회귀모형은 반응 변수와 공변량 사이의 관계를 규명하는 유용한 통계적 모형으로 여러 분야에서 사용되어지고 있다. 하지만 실제로 혼합회귀모형을 이용하여 분석을 하는 과정에서 공변량이 결측값을 포함하는 문제는 흔하게 발생하며, 발생하는 결측의 유형 또한 다양하게 나타난다. 이러한 경우에 있어서 본 논문에서는 최대우도추정량을 구하기 위한 EM 알고리즘을 제안하고자 한다. 제안된 EM 알고리즘의 효용성을 모의실험을 통해 확인하였으며 또한 사례연구를 통해 제시된 방법이 어떻게 사용될수 있는지와 그 효용성을 함께 확인하였다. Finite mixtures of regression models provide an effective tool to explore a hidden functional relationship between a response variable and covariates. However, it is common in practice that data are not fully observed due to several reasons. In this paper, we derived an expectation-maximization (EM) algorithm to obtain the maximum likelihood estimator when some covariates are missing at random in the finite mixture of regression models. We conduct some simulation studies and we also provide some real data examples to show the validity of the derived EM algorithm.
분사시기와 분사량 비에 따른 PCCI의 연소 및 배기 특성에 관한 연구
김형민(Hyungmin Kim),이재현(Jaehyeon Lee),이기형(Kihyung Lee) 한국자동차공학회 2008 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
As world attention has focused on global warming and air pollution, high efficiency diesel engines with low CO₂ emissions have become more attractive. Premixed diesel engines in particular have the potential to achieve the more homogeneous mixture in the cylinder which results in lower NOx and soot emission. It is well known that the injection strategies such as the injection timing and times are important to create the optimal mixture formation for a PCCI (Premixed Charge Compression Ignition) engine. In this research, we investigated the effect of injection timing, injection times and ratio on the combustion and exhaust gas in a direct injection type PCCI engine using the multiple injection strategy. The experimental results showed that the combustion, fuel consumption and emission characteristics in the PCCI engine were dominantly affected by the fuel injection timing, times and ratio.
과열도 및 분사압력 변화에 따른 플래시 스월분무의 분무형상 및 3차원 유동특성 연구
김형민(Hyungmin Kim),윤웅섭(Woongsup Yoon) 한국추진공학회 2015 한국추진공학회 학술대회논문집 Vol.2015 No.5
플래시 스월분무는 인젝터 내부에서의 스월 유동에 의한 압력구배와 감압비등으로 인해 Secondary spray를 형성한다. 또한 Secondary spray의 발생으로 인해 상온의 스월분무 유동은 스월 동축형태의 유동으로 천이하는 특징이 있다. 본 연구에서는 감압비등으로 인해 발생되는 스월분무의 분무형상 및 유동장 천이현상을 이해하기 위한 실험적 연구를 수행하였다. 작동 유체인 물을 과열상태로 만들기 위해 제어 가능한 열선방식의 가열시스템을 사용하였으며 분무형상과 3차원 유동장은 Multi-plane Stereo Particle Image Velocimetry(SPIV) 시스템을 통해 계측되었다. 분사압력이 증가하는 경우 Primary spray와 Secondary spray 모두 속도가 증가하였으며 무차원 과열도가 증가하는 경우는 감압비등에 의해 발생하는 Secondary spray 속도가 증가함을 확인하였다. The secondary spray is unique feature of the flash swirl spray and it does not occur in the cold swirl spray. The spray formation and flow field of the flash swirl spray are also changed the hollow spray to the swirl coaxial spray by the secondary spray. In this study, the spray formation and the flow transition on the flash swirl spray were experimentally investigated. The controllable line heating system was employed to make the superheated water and there was no phase change of water during the heating process. Spray visualization and three-dimensional spray flow field of the flash swirl spray were obtained by using a multi-plane Stereo-PIV system. The study shows that the velocity of the primary and secondary spray is increased simultaneously with enlarging the injection pressure. Especially the velocity of the secondary spray is changed by the non-dimensional superheat degree.
김형민(Hyungmin Kim),윤웅섭(Woongsup Yoon) 한국추진공학회 2012 한국추진공학회 학술대회논문집 Vol.2012 No.11
Flash swirl spray는 감압비등이라는 열역학적 분열 메커니즘을 통해 미립화를 개선하는 장점이 있으며 cold swirl spray에서는 발생하지 않는 secondary spray를 형성한다. 이러한 secondary spray는 hollow cone 형태의 액적분포 및 유동특성을 변화시키는 역할을 하게 된다. 본 연구에서는 primary spray와 secondary spray의 유동특성을 이해하기 위 실험적인 연구를 수행하였다. 유체를 과열상태로 만들기 위해 제어 가능한 열선방식의 가열시스템을 사용하였다. 분무유동과 액적직경을 측정하기 위해 Particle Image Velocimetry(PIV)와 Global Sizing Velocimetry(GSV)를 사용하였으며 분사압력과 무차원 과열도에 따른 플래시 스월분무의 유동특성과 평균액적직경 분포특성을 확인하였다. Flash swirl spray has additional thermodynamic break up source (i. e., flash boiling) and the source makes small droplet distribution (secondary spray) inside liquid sheet (primary spray). In this study, the flow characteristics for the primary and secondary spray were experimentally investigated. The controllable line heating system was employed to make the superheated water and there was no phase change of water during the heating process. Droplet velocity and size of the flash swirl spray were obtained in one parallel to the spray axis using optical measurement system, Particle Image Velocimetry(PIV) and Global Sizing Velocimetry(GSV). Injection pressure and non-dimensional superheat degree were changed to compare the flow pattern and the droplet size distribution of the flash swirl spray.
단일공급 스월 혼합챔버 내의 와류유동에 대한 실험적 연구
김형민(Hyungmin Kim),윤웅섭(Woongsup Yoon) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.11
금속분말을 연소시키기 위한 스월 연소기 설계의 기초단계로써 단일 접선 공급유로를 갖는 스월 혼합챔버를 제작하고 Paticle Image Velocimetry(PIV)를 사용하여 스월 혼합챔버의 내부 유동장 측정실험을 수행하였다. 상온의 공기를 작동유체로 사용하였으며 접선 공급유량이 증가하는 경우의 스월 혼합챔버 내 축방향 및 접선방향 성분 속도를 획득하였다. 측정된 유동장을 바탕으로 스월유동과 역압력 구배로 인해 발생하는 외부 유입유동간의 혼합특성을 평가 하였다. Swirling flows inside a swirl mixing chamber are investigated for simple configuration where swirl is produced by a tangential entry type swirl generator. The flow downstream of the swirl generator has been quantified by measurements two velocity components and their corresponding mean values along axial and radial direction using Particle Image Velocimetry(PIV). The mass flow rate of the tangential entry is increased in order to study their effect on the flow field. From the measurement profile of velocity and vorticity, flow mixing characteristics in a swirl mixing chamber are evaluated.