http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
초음파의 지연 시간을 이용한 두부 조직의 물성변화 예측에 관한 연구
김학정(Hak Jung Kim),김병용(Byung Yong Kim),함영태(Young Tae Hahm) 한국응용생명화학회 1995 Applied Biological Chemistry (Appl Biol Chem) Vol.38 No.4
Changes in the physical properties of soybean curd upon the processing conditions such as coagulant concentration, heating temperature and molding pressure were determined by using a failure stress and residual delay time of ultrasonic wave(5 ㎒). Maximum failure stress of Tofu was obtained at the 0.3% CaCl₂ coagulant concentration, 95℃ heating temperature and greater molding pressure, respectively, whereas the delay time is inverse proportion to the failure stress value. The results of the multiple regression analysis with factorial design showed that the model equation consisted with delay time and processing conditions gave the good prediction of the Tofu failure stress.
아리랑위성 2호, 5호의 우주파편 충돌회피기동 주기 분석
김은혁(Eun-Hyouek Kim),김해동(Hae-Dong Kim),김은규(Eun-Kyou Kim),김학정(Hak-Jung Kim) 한국항공우주학회 2011 韓國航空宇宙學會誌 Vol.39 No.11
본 논문에서는 현재 운용 중인 아리랑위성 2호와 발사예정인 아리랑위성 5호의 우주파편 충돌 회피기동 주기를 분석하였다. 이때, 각 위성들의 임무궤도 특성, 충돌 회피 여유시간, 허용 충돌확률, 위치 불확실성 등의 인자들의 변화에 따라 분석을 수행하였다. 또한, 결과의 타당성을 검증하기 위해 실제 1년 동안 생성된 NORAD TLE 카탈로그(catalog) 상의 우주 물체들과 아리랑위성 2호와의 충돌 회피기동 주기를 계산하였다. 분석 결과, 두 위성 모두 연중 약 1회 충돌 회피기동이 요구됨을 확인할 수 있었으며, 계산 인자들의 변화에 따른 결과 분석을 통해 추후 발사 예정인 저궤도 위성들의 충돌 회피기동 주기 예측 정밀도를 향상시키기 위한 방안들을 제시하였다. In this paper, a collision avoidance maneuver frequency for the KOMPSAT-2 and the KOMPSAT-5 is analyzed. For the statistical prediction of the avoidance maneuver frequency, mission orbits, responsive time, accepted collision probabilities, and positional uncertainties of primary and secondary objects are considered. In addition, the collision avoidance maneuver frequency of the KOMPSAT-2 is compared to the case that NORAD catalog during one year is used to calculate that of the KOMPSAT-2. As a result, the collision avoidance maneuver frequency is one per year on average and effective factors on the statistical prediction of the avoidance maneuver frequency are investigated. Efforts to improve its prediction accuracy are also discussed.
지상국 추적 데이터를 이용한 저궤도 위성의 궤도결정 특성 분석
정옥철(Ok-Chul Jung),최수진(Su-Jin Choi),정대원(Dae-Won Chung),김은규(Eun-Kyou Kim),김학정(Hak-Jung Kim) 한국항공우주연구원 2011 항공우주기술 Vol.10 No.2
본 논문에서는 지상국에서 추적한 저궤도 위성의 방위각 및 고도각을 관측자료로 이용하여 궤도결정을 수행한 결과를 분석하였다. 지상국 추적 데이터는 발사 후 초기 궤도결정을 위한 관측자료로 유용하게 사용된다. 이를 위해 지상국 추적데이터에 대한 표준 인터페이스 포맷을 정리하였고, 특정 지상국에 대한 추적 데이터의 통계적인 특성을 살펴보았다. 최소자승법을 이용한 궤도결정을 위해 연속되는 교신패스를 통해 얻은 아리랑 2호의 방위각/고도각을 축적하여 관측자료로 이용함으로써 다양한 조합에 따른 궤도결정 결과를 분석하였고, 궤도결정 성능 검증을 위해 GPS 항행해를 이용한 궤도결정 값과 비교하였다. This paper analyzes the orbit determination results using azimuth and elevation angle from ground tracking data, which has the standard data interface format, GEOS-C. The ground tracking data is very useful for initial orbit determination after a satellite launch. In this paper, the quality of the measurement data has been investigated using a variety of real tracking passes, compared with the high precision orbit data of KOMPSAT-2. The accumulated tracking data from consecutive satellite-ground passes is processed for orbit determination using least square method. The accuracy of orbit determination result is also presented.
정옥철(Ok-Chul Jung),임현정(Hyeonjeong Yim),정대원(Dae-Won Chung),김은규(Eun-Kyou Kim),김학정(Hak-Jung Kim) 한국항공우주학회 2013 韓國航空宇宙學會誌 Vol.41 No.4
본 논문에서는 다목적실용위성 3호의 초기 궤도운영 결과를 기술하였다. 다목적실용위성 3호는 2012년 5월 18일 발사된 이후 지상국 추적데이터 및 GPS 수신기 데이터를 이용한 궤도결정을 통해 위성의 초기 궤도정보를 획득하였다. 또한, 발사체 투입 궤도로부터 임무궤도로의 변경을 위한 궤도조정을 성공적으로 완료하였다. 그리고 GPS 수신기 원시데이터 및 IGS 데이터를 이용한 정밀궤도결정을 통해 궤도 정밀도를 확인하였다. 다목적 실용위성 3호는 현재 임무궤도에서 정상 운영 중에 있으며, 한국항공우주연구원 지상 관제국에서는 위성 임무 수행에 필요한 궤도 데이터를 매일 생성하여 배포하고 있다. 초기 운영 기간 동안 수행된 궤도운영 결과는 향후 다른 위성의 초기운영의 참고자료로 활용할 예정이다. This paper describes the orbital dynamics operation results for the launch and early operations phase (LEOP) of KOMPSAT-3, which was successfully launched on May 18, 2012. At the initial phase, operational orbit determination was carried out using ground tracking data and GPS navigation solution. And, both in-plane and out-of plane maneuvers were executed in order to change the orbit from the injection orbit to the mission orbit. In addition, the accuracy of precise orbit determination was indirectly evaluated by overlapping method using GPS raw data of KOMPSAT-3 and international GNSS service data from worldwide-distributed ground stations. Currently, KOMPSAT-3 is operated in pre-defined mission orbit, and its various kinds of orbit data are generated and distributed to support the normal mission operations.