http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
A Wideband Down-Converter for the Ultra-Wideband System
김창완,이승식,박봉혁,김재영,최상성,이상국,Kim Chang-Wan,Lee Seung-Sik,Park Bong-Hyuk,Kim Jae-Young,Choi Sang-Sung,Lee Sang-Gug The Korean Institute of Electromagnetic Engineerin 2005 한국전자파학회논문지 Vol.16 No.2
본 논문은 MB-OFDM UWB 시스템에 적용할 수 있는 직접 변환 방식용 하향 주파수 변환기 구조를 제안한다. 제안하는 주파수 변환기 구조는 $3\~5\;GHz$ 광대역 입력 매칭을 하기 위해 일반적으로 CMOS로 구성된 트랜스컨덕턴스 회로를 사용하지 않고, 저항을 사용하였다. 하향 주파수 변환기는 $0.18\;{\mu}m$ CMOS 공정으로 구현하였으며, 측정 결과 3개의 UWB 채널에 대하여 최소 +3 dB의 주파수 변환 이득과 각각 3 dB 이하의 게인 평탄도를 보이며, 1.8 V dc Power supply에서 0.89 mA를 소비한다. In this paper, we propose a direct conversion double-balanced down-converter fer MB-OFDM W system, which is implemented using $0.18\;{\mu}m$ CMOS technology and its measurement results are shown. The proposed down-converter adopts a resistive current-source instead of general transconductance stage using MOS transistor to achieve wideband characteristics over RF input frequency band $3\~5\;GHz$ with good gain flatness. The measured conversion gain is more than +3 dB, and gain flatness is less than 3 dB for three UWB channels. The dc consumption of this work is only 0.89 mA from 1.8 V power supply, leading to the low-power W application.
Material Management Using Radio-Frequency Identification (RFID) in the Construction Industry
김창완,허영기,권순욱,Kim Changwan,Huh Youngki,Kwon Soonwook Korea Institute of Construction Engineering and Ma 2004 건설관리 : 한국건설관리학회 학회지 Vol.5 No.1
The advent of Radio Frequency Identification (RFID) technology has created new opportunities for improving the material management function in the construction industry and is starting to provide major improvements in the efficiency of the material management process. The objective of the research reported herein was to introduce the benefits of RFID technology on material management in the construction industry. RFID technology is discussed and various aspects of this technology are investigated. Potential RFID applications on material management proposed by Construction Industry Institute (CII) Breakthrough Strategy Committee (BTSC) and Fully Integrated and Automated Technology (FIATECH) are spelled out Finally, business analysis of RFID to estimate its impact is provided. It is concluded that there is a significant potential for improvement of material management function in the construction industry through the use of RFID.
비유사량(比流砂量) 추정방법의 개발(II) - 모형 개발 및 검토 -
김창완,김형섭,유권규,우효섭,Kim, Chang Wan,Kim, Hyoung Seop,Yu, Kwon Kyu,Woo, Hyo Seop 대한토목학회 1993 대한토목학회논문집 Vol.13 No.1
The major objective of this study is to develop practical methods for estimating sediment yield rates of medium size watersheds of which areas range from 200 to $2,000km^2$ In the first phase of the study that were presented in the companion paper followed by this paper, a methodology for estimating sediment yield rate was introduced and a total of 13 data points including eight sampled river-sediment data and five reservoir deposit data were collected. In this study, a three-parameter empirical model and a six-parameter rating model, both of which are based on empiricism, have been developed. By limited comparisons, the models developed in this study appear to be more reliable and applicable than the existing ones. According to the sediment yield data collected and the estimations by the models, meanwhile, the lowest value for the sediment yield rate of medium size watersheds in Korea is estimated to be about $100tons/km^2/yr$, and the maximum to be about $1,000tons/km^2/yr$. 본 연구의 주요 목적은 댐 설계를 위한 유역의 비유사량 추정방법을 개발하는 것으로 유역면적 $200km^2{\sim}2,000km^2$의 중규모 유역을 대상으로 한다. 이를 위하여, 먼저 연구(I)에서는 비유사량 추정방법의 개발방향을 결정하고, 기존 저수지 퇴사자료에서 5점과 하천 유사량 실측 자료에서 8 점 등 총 13 점의 비유사량 자료를 도출하였다. 본 연구(II)에서는 이러한 중규모 유역에서 수집된 유역 비유사량 자료와 유역특성 인자들을 이용하여 3 변수 경험공식과 6 변수 도표식 방법을 개발하였다. 제한된 범위와 비교 분석 결과, 본 연구에서 개발된 방법들은 기존의 방법들보다 모형 개발에 이용된 자료의 범위와 신뢰도 면에서 적용성이 높은 것으로 나타났다. 한편, 본 연구에서 수집된 비유사량 자료 및 개발된 모형에 의하면, 우리나라에서 중규모 유역의 경우 비유사량의 하한치는 $100tons/km^2/yr$정도이며 상한치는 $1,000tons/km^2/yr$ 정도로 추정된다.
텔레비전 유휴 주파수 대역을 지원하는 저잡음 및 고선형 특성의 RF 수신기 설계
김창완,Kim, Chang-wan 한국정보통신학회 2018 한국정보통신학회논문지 Vol.22 No.1
본 논문에서는 텔레비전 유휴 주파수 대역(470 MHz ~ 698 MHz)에서 적용 가능한 우수한 수신감도와 높은 선형 특성을 동시에 확보할 수 있는 RF 수신기 구조와 회로 구조를 제안하였다. 제안하는 RF 수신기는 $0.13-{\mu}m$ CMOS 공정으로 설계되었으며, 저잡음 증폭기, 고주파 대역 통과 필터, 고주파 증폭기, 수동 하향 주파수 변환기, 그리고 기저 대역 통과 필터로 구성되어 있다. 높은 수신감도를 얻기 위해 저잡음 증폭기와 고주파 증폭기를 적용하였으며, 인접 채널에 위치하는 인터피어러를 고주파 대역에서 필터링하기 위해 MOS 스위치와 커패시터를 이용한 고주파 대역 통과 필터와 수동 하향 주파수 변환기를 동시에 사용하였다. 제안된 4차 저역통과 필터는 공통-게이트 증폭기에 기존의 바이쿼드 셀을 적용하여 -24dB/oct 필터링 특성을 얻었다. 모의 실험결과로부터 설계된 RF 수신기는 56 dB의 전압이득, 2 dB 이하의 잡음 지수, -2.3 dBm의 IIP3 (out-of-channel) 성능을 제공하며, 1.5 V 전원으로부터 37 mA를 소모 한다. This paper has proposed a low-noise and high-linear RF receiver supporting TV white space from 470 MHz to 698 MHz), which is implemented in $0.13-{\mu}m$ CMOS technology. It consists of a low-noise amplifier, a RF band-pass filter, a RF amplifier, a passive down-conversion mixer, and a channel-selection low-pass filter. A low-noise amplifier and RF amplifier provide a high voltage gain to improve the sensitivity level. To suppress strong and nearby interferers, two RF filtering schemes have been performed by using a RF BPF and a down-conversion mixer. The proposed LPF has been based on the common-gate topology and adopted a bi-quad cell to achieve -24dB/oct characteristics. In addition, the RF receiver can support the overall TV band by controlling a LO frequency. The simulated results show a voltage gain of 56 dB, a noise figure of less than 2 dB, and an out-of-channel IIP3 of -2.3 dBm. It consumes 37 mA from a 1.5 V supply voltage.
Assessment of Advanced Joining Technologies for Metal Pipe in the Construction Industry
김창완,Kim Chang-Wan Korea Institute of Construction Engineering and Ma 2004 건설관리 : 한국건설관리학회 학회지 Vol.5 No.2
Pipe joining is one of the most critical aspects of most industrial projects, but it is regarded as one of the most inefficient processes in the construction industry. The primary objective of this paper is to explore the applicability of advanced joining technology to the use of metal pipe in the construction industry. This paper begins with a review of current practices with respect to metal joining in the construction industry. The current status of pipe joining is examined. Needs for, and benefits of, advanced joining technology are identified, and a tool for evaluating the applicability of various methods to construction is presented. Joining technologies, including mechanical joining, adhesive bonding, welding, and welding automation, are then introduced, and their applicability to the construction industry is assessed by means of this evaluation tool. It is concluded that there is significant benefits for improvement of piping process in the construction industry through the use of advanced joining technologies.