http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
무전해 도금법으로 제조된 Co(Re,P) capping layer제조 및 특성 평가
한원규,김소진,주정운,조진기,김재홍,염승진,곽노정,김진웅,강성군,Han, Won-Kyu,Kim, So-Jin,Ju, Jeong-Woon,Cho, Jin-Ki,Kim, Jae-Hong,Yeom, Seung-Jin,Kwak, Noh-Jung,Kim, Jin-Woong,Kang, Sung-Goon 한국재료학회 2009 한국재료학회지 Vol.19 No.2
Electrolessly deposited Co (Re,P) was investigated as a possible capping layer for Cu wires. 50 nm Co (Re,P) films were deposited on Cu/Ti-coated silicon wafers which acted as a catalytic seed and an adhesion layer, respectively. To obtain the optimized bath composition, electroless deposition was studied through an electrochemical approach via a linear sweep voltammetry analysis. The results of using this method showed that the best deposition conditions were a $CoSO_4$ concentration of 0.082 mol/l, a solution pH of 9, a $KReO_4$ concentration of 0.0003 mol/l and sodium hypophosphite concentration of 0.1 mol/L at $80^{\circ}C$. The thermal stability of the Co (Re,P) layer as a barrier preventing Cu was evaluated using Auger electron spectroscopy and a Scanning calorimeter. The measurement results showed that Re impurities stabilized the h.c.p. phase up to $550^{\circ}C$ and that the Co (Re,P) film efficiently blocked Cu diffusion under an annealing temperature of $400^{\circ}C$ for 1hr. The good barrier properties that were observed can be explained by the nano-sized grains along with the blocking effect of the impurities at the fast diffusion path of the grain boundaries. The transformation temperature from the amorphous to crystal structure is increased by doping the Re.
백윤기(Baek Yun-Ki),최미남(Choi Mi-Nam),허남호(Hur Nam-Ho),김진웅(Kim Jin-woon),유지상(Ji-Sang) 한국방송·미디어공학회 2006 한국방송공학회 학술발표대회 논문집 Vol.2006 No.-
영상의 영역 분할을 통한 다시점 영상의 생성기법을 제안한다. 본 논문에서는 다시점 영상을 생성하기 위해 공간적으로 색상 정보와 시간적으로 움직임 정보를 이용하여 객체를 추출하고 이로부터 다시점 영상을 생성하게 된다. 색상 정보는 움직임 정보로는 정확한 외곽을 추출하지 못하기 때문에 정확한 외곽을 추출하기 위해 사용되어진다. 색상의 동질영역을 구분하기 위하여 휘도와 색차를 이용하며, 정합창을 사용하여 화소기반의 움직임 예측을 수행한다. 다음 단계로 색상 정보와 움직임 정보를 통해 독립적으로 얻어진 결과를 결합하게 된다. 움직임 예측을 통해 얻은 움직임의 세기값을 색상정보를 이용해 얻은 영역에 할당하고 이를 깊이값으로 변환하게 된다. 2차원의 입력 영상과 변환되어진 깊이값을 통해 회전변환의 과정을 거쳐서 최종의 다시점 영상이 생성된다. 실험을 통해서 제안된 알고리즘이 효과적으로 다시점 영상을 생성함을 확인할 수 있었다.