재조합 소성장호르몬의 전체 아미노산 서열분석을 위한 2 차원 고성능 액체 크로마토그래피법에 관한 연구

김정호,김훈주,김준 ( Jungho Kim,Hoon Joo Kim,Joon Kim ) 생화학분자생물학회 1992 BMB Reports Vol.25 No.3

In order to separate and purify tryptic digested recombinant bST (rbST), 2-dimensional HPLC which involves a combination of strong cation-exchange chromatography and reverse-phase chromatography was applied. A single dimension RP-HPLC resulted in several heterogeneous peaks. However, all fractions purified by two-dimensional chromatogrphy resulted in homogeneous peptides and unambiguous sequence data. With a view of separating perfectly, tryptic digest was first fractionated by strong cation-exchange chromatogrphy. The nine fractions were obtained from this chromatogrphy and each of these fractions was applied to RP-HPLC. Fractions yielded from RP-HPLC were submitted for direct sequence analysis and clear sequence data were obtained. In this study, the location of disulfide bonds, Cys53-Cys164 and Cys181-Cys189, also were confirmed in rbST.

A Study of the Two-Dimensional High-Performance Liquid Chromatogrphy for Total Amino Acid Sequencing of rbST

김정호,김훈주,김준,Kim, Jung-Ho,Kim, Hoon-Joo,Kim, Joon 생화학분자생물학회 1992 한국생화학회지 Vol.25 No.3

트립신으로 절단한 재조합 소성장호르몬의 펠타이드 조각을 분리, 정제하기 위하여 강이온 교환 HPLC와 역상 HPLC의 2차원 고성능 액체 크로마토그래피법을 이용하였다. 1차원적으로 역상 HPLC만을 이용해 펩타이드를 분리하였을 때에는 두 가지 이상의 서로 다른 펩타이드가 섞여 있는 heterogeneous peak이 발견되였다. 그러나 2차원 HPLC에 의해 펩타이드를 분리 시켰을 때에는 고도로 정제된 펩타이드를 얻을 수 있였다. 트립신 절단 결과 생긴 펩타이드를 모두 분리시키기 위해 1차적으로 강 양이온 교환 HPLC를 시행하였다. 이 결과 9개의 서로 다른 peak를 분리해 냈으며, 각각의 peak들을 다시 역상 HPLC하여 2차적인 분리를 시도하였다. 여기에서 얻은 peak들을 아미노산 서열분석을 통해 명료한 서열 분석결과를 얻어 낼 수 있었다. 또한 이 과정을 통해 53번 Cys과 164번 Cys 그리고 181번 Cys 사이에 disulfide bond가 존재하고 있음도 동시에 확인할 수 있었다. In order to separate and purify tryptic digested recombinant bST (rbST), 2-dimensional HPLC which involves a combination of strong cation-exchange chromatography and reverse-phase chromatography was applied. A single dimension RP-HPLC resulted in several heterogeneous peaks. However, all fractions purified by two-dimensional chromatogrphy resulted in homogeneous peptides and unambiguous sequence data. With a view of separating perfectly, tryptic digest was first fractionated by strong cation-exchange chromatogrphy. The nine fractions were obtained from this chromatogrphy and each of these fractions was applied to RP-HPLC. Fractions yielded from RP-HPLC were submitted for direct sequence analysis and clear sequence data were obtained. In this study, the location of disulfide bonds, Cys53-Cys164 and Cys181-Cys189, also were confirmed in rbST.

진동/음향 해석에 의한 스피커의 음향특성 연구

김정호,김준태,김진오,민진기,Kim, Jung-Ho,Kim, Jun-Tai,Kim, Jin-Oh,Min, Jin-Ki 대한기계학회 1997 大韓機械學會論文集A Vol.21 No.10

The acoustic characteristics of a direct radiator type loudspeaker has been studied in this paper. The natural modes of the speaker cone vibration analyzed numerically by the finite element method have been verified by comparing them with experimental results. The so-ap-proved finite-element model has been used to calculate the vibration response of the cone excited by the voice coil. The vibration displacement of the speaker cone paper has been converted into the vibration velocity and used as a boundary condition for the acoustic analysis. The frequency characteristics, directivity, and sound pressure distribution of the loudspeaker have been calculated by the boundary element method. The numerical results have been verified by the experiments carried out in an anechoic chamber. The variations of the acoustic characteristics due to the changes of some design parameter values can be examined using the numerical model.

강재로 구속된 프리스트레스트 콘크리트 합성거더의 정적 및 피로거동

김정호,박경훈,황윤국,이상윤,Kim, Jung Ho,Park, Kyung Hoon,Hwang, Yoon Koog,Lee, Sang Yoon 한국강구조학회 2004 韓國鋼構造學會 論文集 Vol.16 No.6

최근 국내에서 I형 거더의 외부가 강재로 이루어지고 내부에 무근콘크리트가 채워져 합성된 거더에 프리스트레스를 도입하여 경간을 장대화할 수 있는 새로운 개념의 합성거더인 '강재로 구속된 프리스트레스트 콘크리트 합성거더(Steel-Confined Prestressed Concrete Girder; SCP Girder)'가 개발되었다. 또한 개발된 거더를 실물크기로 제작하여 시공성을 확인하고 정적하중 재하에 의한 파괴실험을 통해 공용 중 안전성에 대한 실험적 검증이 수행되었다(김정호 등, 2002). 그러나 SCP 합성거더의 실용화를 위해서는 교량 파손의 주원인이 주행하중의 영향에 의한 피로파손인 점을 고려하여 반복하중에 대한 피로거동의 연구 및 피로 안전성 확보가 요구된다. 따라서 본 연구에서는 SCP 합성거더에 대한 피로거동 특성을 파악하고 피로설계를 위한 기초적인 자료를 제시하기 위해 피로실험을 실시하였다. 피로실험을 위한 시험체의 제작은 1등교에 해당하는 설계활하중(DB-24)에 대하여 10m 지간으로 설계 제작하였으며, 실험결과 도로교설계기준(한국도로교통협회, 2000)의 상세피로범주에 따른 허용피로응력범위를 초과하지 않는 것으로 나타났다. 또한 초기정적재하를 통해 설계의 타당성과 구조적 거동을 분석하였으며, 피로실험 종료 후 거더 외부를 이루고 있는 강재를 제거하여 내부콘크리트의 상태를 관찰하였다. A new type of girder, called steel-confined prestressed concrete girder (SCP girder), has been developed, which maximizes the structural advantages of concrete, steel, and PS tendon, and improves on the shortcomings of steel plate girder, PSC I-girder, and preflex girder bridge for use in the construction of middle- or long-span bridges. To verify the propriety of design, structural safety, and applicability of this girder, a static load test was carried out (Kim et al.., 2002). Since the main damage typically sustained by steel bridges results from the fatigue caused by the repetition of traffic loads, fatigue safety must therefore be guaranteed in applying the SCP girder in the construction of real bridges. In this study, a fatigue test was carried out to investigate fatigue behavior and provide basic data for fatigue design. Based on the fatigue test, the fatigue safety of the girder was estimated. For the fatigue test, 10-m specimens were designed for a standard-design truckload (DB-24). A static load test was also performed before the fatigue test to analyze the structural behavior of the specimens. After the fatigue test, outer steel plates were removed to observe the condition of the concrete in the girder.

교통사고로 인한 경추부 손상으로 내원한 환자 1례에 대한 증례보고

김정호,김영화,장석근,임윤경,강재희,김영일,홍권의,이현,이병렬,Kim, Jeong-ho,Kim, Young-wah,Jang, Suk-gun,Yim, Yun-kyoung,Kang, Jae-hui,Kim, Young-il,Hong, Kwon-eui,Lee, Hyun,Lee, Byung-ryul 대한침구의학회 2003 대한침구의학회지 Vol.20 No.6

Objective : Recently, Seguele of Traffic Accident patients are increasing, especially cervical injury bring only severe sequela but also mortal damage to the patient. In treatment of the disease, the east medical treatment is another effective method. Methods : The patient resisted the west theraphy improved greatly in movement and sensation by acupuncture, moxibustion, herb medication and Physical treatment. In MRI, The treatment result is proved. Acupuncture on Stomach Meridian(足陽明胃經) referring to Naijing(內經) is thought effective. Results : Tetraplegia by Traffic Accident is considered as Wei Symptom in term of the east medicine, By means of radial and physical study of the patient treated by the east medicine, we are conviced that the east medicine is the excellent method Conclusions : Referring to the past documentary data, The only Treatment on this disease is Surgical operation, but the operation isn't the successful one because seg. of spinal cord injury is mortal. The east treatment, acupuncture, moxibustion herb medication and physical treatment isn't only effective but also satisfactory. In the future, The study on this disease by the east medicine should be made thoroughly.

$^{99m}Tc$ 발생기의 24시간 내 2회 용출의 유용성 평가

김정호,서한경,정영환,김영수,김병철,권용주,이정옥,박영순,김동윤,Kim, Jeong-Ho,Seo, Han-Kyung,Jeong, Yeong-Hwan,Kim, Yeong-Su,Kim, Byung-Cheol,Gwon, Yong-Ju,Lee, Jeong-Ok,Park, Yeong-Sun,Kim, Dong-Yun 대한핵의학기술학회 2010 핵의학 기술 Vol.14 No.2

$^{99}Mo$-$^{99m}Tc$ 발생기의 원료물질인 몰리브덴은 원자로에서 생산되고 있으나 현재 의료용 방사성 동위원소를 공급하는 두 원자로인 캐나다 온타리오주의 초크리버(Chalk River)와 네덜란드 페튼(Petten) 원자로의 노후화로 인한 유지 보수로 가동이 정지된 이후세계적인 몰리브덴 품귀 현상은 발생기 공급차질로 이어 지고있다. 이에 저자들은 발생기의 효율적인 운용 방법을 찾아 $^{99m}Tc$ 생산량을 증가 시키고 그 결과로 얻은$^{99m}Tc$의 안전성을 실험을 통해 확인하였다. 교정일자가 동일한 두 대의 발생기(Malinckrodt Medical, Dutch), 40.5 GBq (1500 mCi)를 이용하여 월요일부터 금요일까지 5일 동안 1회/일(24시간 주기, 오전8시 용출) 총 5회 용출한 $^{99m}Tc$의 방사능과, 5일 동안 2회/일(오전8시와 오후1시 용출) 총 10회 용출한 $^{99m}Tc$의 방사능을 비교 분석 하였다. 용출된 $^{99m}Tc$의 안정성을 $^{99}Mo$-$^{99m}Tc$ 발생기 정도 관리 항목 중 성상 검사, pH 검사, 발열성 물질 검사(LAL test), 무균 검사, 발생기의 화학 순도 검사, 방사화학적 순도 검사, 방사성 핵종의 순도 검사를 통해 확인해 보았다. 24시간 주기로 주 5회 용출한 $^{99m}Tc$의 총 방사능은 평균 168.2 GBq (4545 mCi)였고, 24시간 주기 용출 방법에 오후1시 추가 용출을 실시하여 주 10회 용출한 $^{99m}Tc$의 총 방사능은 평균 230.5 GBq (6230 mCi)로 24시간 주기의 주 5회 용출한 방사능보다 총 62.3 GBq (1685 mCi), 일 평균 12.46 GBq (337 mCi)로 전체 용출 방사능이 27.04% 증가 하였으며 각 시간 별로 얻어진 $^{99m}Tc$의 정도 관리는 정상 범위 내에 있었다. 이번 실험을 통하여 2회/일 용출방법이 1회/일 용출방법보다 62.3 GBq (1685 mCi)의 더 많은 방사능의 $^{99m}Tc$을 생산 할 수 있었으며 각 시간 별로 얻어진 $^{99m}Tc$의 정도 관리는 정상 범위 내에 있었다. 이에 따라 각 시간 별로 용출된 $^{99m}Tc$을 방사성 표지 화합물과 결합시켜 검사를 시행하여도 무관할 것으로 생각된다. Purpose: The Molybdenum which is the raw material of $^{99}Mo$-$^{99m}Tc$ generator (generator) is produced from the nuclear reactor. However, output has dwindled as the two nuclear reactors supplying the bulk of radioactive material-one in Chalk River, Ontario and the other in Petten, the Netherlands-have been closed for repairs or maintenance. This resulted in the enhancement of its price. Therefore we have tried to seek the new method which could run generator to increase activity of $^{99m}Tc$ in this study. Materials and Methods: The $^{99m}Tc$ activity obtained from 5 times elution for 5 days from Monday to Friday using two generators was compared with 10 times elution. Appearance test, pH test, LAL test, sterility test, chemical impurity(Al) test, radio chemical purity test, ratio of $^{99}Mo$/$^{99m}Tc$ activity test have been done to check the stability of $^{99m}Tc$ eluting from generator respectively. Results: The $^{99m}Tc$ activity obtained from 5 times elution for 5 days was 168.2 GBq (4545 mCi) and 10 times was 230.5 GBq (6230 mCi). All quality control tests were within normal limit. Conclusion: We got to know that 2 times elution a day obtained more $^{99m}Tc$ activity than one time elution in this study.

공작실에서 실내 및 작업종사자의 중금속 오염도에 관한 고찰

김정호,김가중,김성기,배석환,Kim Jeong-Ho,Kim Gha-Jung,Kim Sung-Ki,Bea Suk-Hwan 대한방사선치료학회 2005 대한방사선치료학회지 Vol.17 No.2

Purpose : Heavy metal use when producing the block from the workshop. At this time, production of heavy metal dust and fume gives risk in human. This like heavy metal to improve seriousness through measurement and analysis. And by the quest in solution is purpose of this thesis. Materials and Methods : Organization is Inductively Coupled Plasma Atomic Emission Spectrometer, and the object is Deajeon city 4 workshops in university hospital radiation oncology (Bismuth, Lead, Tin and cadmium). Method is the ppb the pumping it does at unit, comparison analysis. And the Calculation heavy metal standard level in air through heavy metal standard level in body and blood, so Heavy metal temporary standard set. Results : Subterranean existence room air quality the administration laws appointed Lead and Cadmium's exposure recommend that it is $3{\mu}g/m^3\;and\;2{\mu}g/m^3$. And Bismuth and Tin decides $7{\mu}g/m^3\;and\;6{\mu}g/m^3$ through standard level in air heavy metal and standard level in body and blood. Heavy metal measurement level of workshops in 4 university hospital Daejeon city compares with work existence and nonexistence. On work nonexistence almost measurement level is below the recommend level. But work existence case express high level. Also consequently in composition ratio of the block is continuous with the detection ratio. Conclusion : Worker's heavy metal contamination imbrued serious for solution founds basic part. In hospital may operation on local air exhauster and periodical efficiency check, protector offer, et al. And worker have a correct understanding part of heavy metal contamination, and have continuous interest, health control. Finally, learned society sphere administer to establishment standard level and periodical measurement. And it founds basic solution plan of periodical special health checkup.

CIM Architecture 상의 Cell Controller 역할

김정호,김현기,이전우,이직열,Kim, Jeong-Ho,Kim, Hyeon-Gi,Lee, Jun-U,Lee, Jin-Yeong 한국전자통신연구원 1988 전자통신 Vol.10 No.4

본 고는 CIM구조 상에서 cell controller의 역할을 기능과 구성, 제품에 따른 기술 등으로 구분하여 기술하고, 그 적용과 표준화 동향에 대하여 소개한다.

사용자탐방-서울대학교 항공우주공학과 항공우주구조연구실

김정호,Kim, Jeong-Ho 한국과학기술정보연구원 2001 지식정보인프라 Vol.4 No.-

순환 및 비순환 디지틀 필터를 상호연결한 복합 필터의 설계 및 특성비교

김정호,Kim, Jeong-Ho 한국전자통신연구원 1985 전자통신 Vol.7 No.2

In this paper, by combining the exiting IIR filters with FIR filters in cascade, the design of Hybrid Digital Filters which enables us to match the trade-off relations to different characteristics is presented.