산부식 전처리에 따른 2단계 자가부식 접착제의 연마 법랑질에 대한 미세인장결합강도

김유리,김지환,심준성,김광만,이근우,Kim, You-Lee,Kim, Jee-Hwan,Shim, June-Sung,Kim, Kwang-Mahn,Lee, Keun-Woo 대한치과보철학회 2008 대한치과보철학회지 Vol.46 No.2

자가부식 접착제는 사용하기 쉽고, 술식 민감성이 적은 장점이 있으나 특히 산도가 약한 자가부식 접착제의 법랑질에 대한 결합력은 논란이 되고 있다. 본 연구에서는 2단계 자가부식 접착제인 Clearfil SE Bond (Kuraray, Okayama, Japan)의 연마 법랑질에 대한 미세인장 결합강도를 측정하여 3단계 산부식수세 접착제인 Scotchbond Multi-Purpose (3M ESPE, St. Paul, MN, USA) 및 1단계 자가부식 접착제인 iBond (Heraeus Kulzer Gmbh, Hanau, Germany)의 결합강도와 비교하고자 하였고, 2단계 자가부식 접착제에 산부식 전처리를 시행하는 것이 법랑질에 대한 결합강도를 높일 수 있는지 알아 보고자 하였다. 실험군은 2단계 자가부식 접착제인 Clearfil SE Bond만 사용한 비산부식 군과 35% 인산 (Scotchbond Etchant, 3M ESPE)으로 산부식 후 Clearfil SE Bond를 사용한 산부식 군, 그리고 1단계 자가부식 접착제인 iBond를 사용한 군으로 나누었다. 대조군은 3단계 산부식수세 접착제인 Scotchbond Multi-Purpose를 사용한 군으로 정하였다. Bovine 전치의 순면을 십자가형으로 4등분하여 각 군으로 무작위로 배분하였다. 각 치아의 순면을 800-grit 실리콘 카바이드 지로 연마한 후 삭제된 법랑질면에 제조사의 설명서에 따라 각 군의 접착제를 적용하고 Light-Core (Bisco)로 적층 충전하였다. 시편은 $37i{\acute{E}}$, 증류수에 일주일 동안 보관한 후 low speed precicion diamond saw (TOPMENT Metsaw-LS, R&B, Daejeon, Korea)를 이용하여 약 $0.8{\times}0.8mm$ 단면이 되도록 시편을 절단하여 미세시편을 제작하였다. 일주일마다 증류수를 교환하면서 한 달, 세 달 동안 $37i{\acute{E}}$, 증류수에 미세시 편을 보관한 후 각각의 미세인장결합강도를 측정하였다. 미세인장결합강도 (MPa)는 파절 시에 가해진 힘 (N)을 접착면적 ($mm^2$)으로 나누어 계산하였다. 접착계면에서의 파절 양상은 실물현미경 (Microscope-B nocular, Nikon)을 이용하여 분류하였다. 미세인장결합강도에 대한 통계분석은 one-way ANOVA를 이용하여 유의수준 5%에서 검정하였고, 사후감정은 Least Significant Difference 방법을 이용하였다. 중합 후 1개월 뒤 측정된 각각의 접착제의 평균 미세인장결합강도는 유의수준 5%에서 모든 접착제 간에 유의한 차이가 없었다. 3개월 뒤 측정된 각각의 접착제의 평균 미세인장결합강도는 유의수준 5%에서 iBond 와 Clearfil SE Bond 비산부식 군과 Scotchbond Multi- Purpose 간에는 각각 유의한 차이가 없었다. 본 연구에서는 2단계 자가부식 접착제인 Clearfil SE Bond의 연마 법랑질에 대한 미세인장결합강도가 3단계 산부식수세 접착제인 Scotchbond Multi-Purpose 와 비교하여 유의한 차이가 없었으며 (P>0.05), 3개월 후의 결과에서 Clearfil SE Bond 비산부식 군의 미세인장결합강도가 Clearfil SE Bond 산부식 군보다 유의하게 낮았다 (P<0.05). 즉 35% 인산으로 산부식 전처리를 시행한결과 Clearfil SE Bond 의 법랑질에 대한 결합강도가 증가하였다. Statement of problems: Self-etch adhesives exhibit some clinical benefits such as ease of manipulation and reduced technique-sensitivity. Nevertheless, some concern remains regarding the bonding effectiveness of self-etch adhesives to enamel, in particular when so-called 'mild' self-etch adhesives are employed. This study compared the microtensile bond strengths to ground enamel of the two-step self-etch adhesive Clearfil SE Bond (Kuraray) to the three-step etch-and- rinse adhesive Scotchbond Multi-Purpose (3M ESPE) and the one-step self-etch adhesive iBond (Heraeus Kulzer). Purpose: The purpose of this study was to determine the effect of a preceding phosphoric acid conditioning step on the bonding effectiveness of a two-step self-etch adhesive to ground enamel. Material and methods: The two-step self-etch adhesive Clearfil SE Bond non-etch group, Clearfil SE Bond etch group with prior 35% phosphoric acid etching, and the one-step self-etch adhesive iBond group were used as experimental groups. The three-step etch-and-rinse adhesive Scotchbond Multi-Purpose was used as a control group. The facial surfaces of bovine incisors were divided in four equal parts cruciformly, and randomly distributed into each group. The facial surface of each incisor was ground with 800-grit silicon carbide paper. Each adhesive group was applied according to the manufacturer's instructions to ground enamel, after which the surface was built up using Light-Core (Bisco). After storage in distilled water at $37^{\circ}C$ for 1 week, the restored teeth were sectioned into enamel beams approximately 0.8*0.8mm in cross section using a low speed precision diamond saw (TOPMET Metsaw-LS). After storage in distilled water at $37^{\circ}C$ for 1 month, 3 months, microtensile bond strength evaluations were performed using microspecimens. The microtensile bond strength (MPa) was derived by dividing the imposed force (N) at time of fracture by the bond area ($mm^2$). The mode of failure at the interface was determined with a microscope (Microscope-B nocular, Nikon). The data of microtensile bond strength were statistically analyzed using a one-way ANOVA, followed by Least Significant Difference Post Hoc Test at a significance level of 5%. Results: The mean microtensile bond strength after 1 month of storage showed no statistically significant difference between all adhesive groups (P>0.05). After 3 months of storage, adhesion to ground enamel of iBond was not significantly different from Clearfil SE Bond etch (P>>0.05), while Clearfil SE Bond non-etch and Scotchbond Multi-Purpose demonstrated significantly lower bond strengths (P<0.05), with no significant differences between the two adhesives. Conclusion: In this study the microtensile bond strength to ground enamel of two-step self-etch adhesive Clearfil SE Bond was not significantly different from three-step etch-and-rinse adhesive Scotchbond Multi-Purpose, and prior etching with 35% phosphoric acid significantly increased the bonding effectiveness of Clearfil SE Bond to enamel at 3 months.

복부 혈위 뜸 자극 위치의 차이가 체표 온도 변화에 미치는 영향

김유리,노승희,양기영,육태한,김종욱,Kim, Yu Ri,Noh, Seung Hee,Yang, Gi Young,Yook, Tae Han,Kim, Jong Uk 대한침구의학회 2013 대한침구의학회지 Vol.30 No.1

Objectives : This study aimed to investigate the difference of abdominal skin temperature responses following moxibustion comparing stimulation method. Methods : Moxibustion was applied on the acupuncture points of $CV_4$, $CV_6$, $CV_{12}$. Thirty healthy men were randomly divided into two groups, one receiving a single moxibustion stimulation in three locations '$CV_4{\cdot}CV_6{\cdot}CV_{12}$'(n=15) and the other receiving triple moxibustion stimulations in one location '$CV_{12}$'(n=15) for 30 min. To obtain the skin temperature on abdominal region, a thermograph was used. Three arbitrary frames(the upper abdominal, lower abdominal, whole abdominal regions) were made to analyse skin temperature. Thermographic images were obtained at before and after the procedure of indirect moxibustion and 5, 10, 15, 20, 25, 30 min afterwards. Results : An increase in skin temperature on the three abdominal regions was observed following both one point and three points moxibustion administrations. Significant increase in skin temperature of the whole abdominal region was observed at 30 min after the procedure of three points moxibustion compared with one point moxibustion stimulation. A tendency of skin temperature changes over time was observed. Conclusions : In this study, skin temperature of lower abdominal region does not increase after triple moxibustion stimulations on $CV_{12}$. Administration of single moxibustion on $CV_4$, $CV_6$, $CV_{12}$ makes greater changes in skin temperature on the whole abdominal region than triple moxibustion on $CV_{12}$.

Intake of antioxidants and B vitamins is inversely associated with ischemic stroke and cerebral atherosclerosis

김유리,Hansaem Choe,Ji-Yun Hwang,Jin A Yun,Ji-Myung Kim,송태진,Namsoo Chang,Yong-Jae Kim 한국영양학회 2016 Nutrition Research and Practice Vol.10 No.5

BACKGROUND/OBJECTIVES: This study was conducted to examine relationships between dietary habits and intakes of antioxidants and B vitamins and the risk of ischemic stroke, and to compare dietary factors according to the presence of cerebral artery atherosclerosis and stroke subtypes. SUBJECTS/METHODS: A total of 147 patients and 144 control subjects were recruited consecutively in the metropolitan area of Seoul, Korea. Sixty participants each in the case and control groups were included in analyses after 1:1 frequency matching. In addition, 117 acute ischemic stroke patients were classified into subtypes according to the Trial of Org 10172 in Acute Stroke Treatment (TOAST) guidelines. Dietary intake was measured using a semi-quantitative food frequency questionnaire composed of 111 food items and plasma lipid and homocysteine levels were analyzed. RESULTS: When compared with control subjects, stroke patients had unfavorable dietary behaviors and lower intakes of fruits (73.1 ± 83.2 g vs. 230.9 ± 202.1 g, P < 0.001), vegetables (221.1 ± 209.0 g vs. 561.7 ± 306.6 g, P < 0.001), and antioxidants, including vitamins C, E, B6, β-carotene, and folate. The intakes of fruits, vegetables, vitamin C, and folate were inversely associated with the risk of ischemic stroke after adjusting for confounding factors. Intakes of vegetables, vitamins C, B6, B12, and folate per 1,000 kcal were lower in ischemic stroke with cerebral atherosclerosis than in those without. Overall vitamin B12 intake per 1,000 kcal differed according to the TOAST classification (P = 0.004), but no differences among groups existed based on the post-hoc test. CONCLUSIONS: When compared with control subjects, ischemic stroke patients, particularly those with cerebral atherosclerosis, had unfavorable dietary intake, which may have contributed to the development of ischemic stroke. These results indicate that proper dietary recommendations are important for the prevention of ischemic stroke.

Application of an Electron Accelerator for the Treatment of Wastewater from Textile Dyeing Industries

김유리,Jinkyu Kim,한범수,최장승,Myun Joo Lee, 한국물리학회 2011 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.59 No.61

Textile dyeing processes consume a great amount of water and steam and discharge filthy and colored wastewater. Increased use of assorted dyes and other chemicals has increased the pace of reequipping purification facilities by applying efficient methods based on radiation technology. Based on laboratory data, a pilot-scale e-beam plant was constructed at the Daegu Dyeing Industrial Complex (DDIC) in 1998. An electron accelerator, 40 kW at 1 MeV, was used for 1,000 m^3 per day. Continuous operation of this plant showed that the preliminary e-beam treatment reduced the bio-treatment time and resulted in significant decreases in the TOC (total organic carbon), COD_(Cr) (Chemical Oxygen Demand as dichromate method), and BOD_5 (Biochemical Oxygen Demand in 5 days). Convinced of the economics and efficiency of the process, a commercial plant with a 400-kW electron accelerator was constructed in 2005. This plant improved the removal efficiency of wastewater by decreasing the retention time in a bio-treatment facility with a dose of approximately 1 kGy. This plant is located in the vicinity of an existing wastewater treatment facility in the DDIC, and the treatment capacity is 10,000 m^3 of wastewater per day.

BIM 기반의 건축법규검토를 위한 룰셋 정의서 개발 - 장애인,노인,임산부 등의 편의증진 보장에 관한 법률 대상으로 -

김유리,이상화,박상혁,Kim, Yuri,Lee, Sang-Hya,Park, Sang-Hyuk 한국건설관리학회 2012 한국건설관리학회 논문집 Vol.13 No.6

조달청은 2016년부터 공공공사 전 사업으로 BIM 발주를 확대할 계획이어서 BIM 설계의 중요성이 증가하고 있다. 이에 따라, BIM 설계의 품질을 확보하는 방안 법규검토의 중요성 또한 증가하고 있다. 본 연구에서는 장애인 노인 임산부 등의 편의증진보장에 관한 법률을 대상으로 실무의 건축계획 과정에서 빈번하게 검토되는 항목을 중심으로 최적화된 룰셋 정의서를 개발하였다. 법규조항을 선정하는 과정으로는 프로젝트 법규검토서를 활용한 빈도 분석, 함수화 가능도 분석, 모델 검토 가능성 분석을 제시하였다. 모델 검토 시나리오 작성에 따라 룰셋 정의서를 개발하였으며, 실제 프로젝트에서 구현을 통해 적용성 및 정합성 분석을 수행하였다. 본 연구를 수행한 결과, 자동법규검토에서는 경제성 및 활용성을 확보할 수 있는 항목의 선정이 중요함을 확인할 수 있었다. 향후 연구에서는 대상 법규 조항 선정의 항목 세분화가 필요하며, 실무자 검증을 통해 좀 더 실질적인 항목 도출이 요구된다. 또한 자동법규검토에서 발생할 수 있는 모델링 요구사항, 소프트웨어 간 호환성 문제 등의 변수를 확인하고 룰셋의 논리를 검증하는 사례 연구가 수행되어야 한다. As the Public Procurement Service announced the compulsory of BIM adaption in every public construction from 2016, the importance of BIM is increasing. Besides, automatic code checking takes significance in terms of the quality control for BIM based design. In this study, rule-sets were defined for Act on the Promotion and Guarantee of Access for the Disabled, the Aged, and Pregnant Women to Facilities and Information. Three analytic steps were suggested to shortlist the objective clauses from the entire code; the frequency analysis using project reviews for architectural code compliance, the clause analysis on quantifiability, and the analysis for model checking possibilities. The shortlisted clauses were transformed into the machine readable rule-set definition. A case study was conducted to verify the adaptiveness and consistency of rule-set definitions. In future study, it is required the methodologies of selecting objective clauses to be specified and its indicators to be quantified. Also case studies should be performed to determine the pre-conditions in modeling and to check interoperability issues and other possible errors in models.

Genome 분석에서의 Microarray 응용

김유리,Kim, Yu-Ri 한국유전체학회 2007 유전체소식 Vol.7 No.2

청계천복원사업의 조경설계안 변경 요인 분석

김유리,양병이,Kim, Yu-Ri,Yang, Byoung-E 한국조경학회 2007 韓國造景學會誌 Vol.35 No.5

In this study, the implications for landscape architecture in the restoration Project of Cheonggyecheon will be shown through the analysis of factors for landscape architect scheme modification. The method of study consists of theoretical study, analysis of the plan and design of landscape architecture of the restoration project of Cheonggyecheon, and deduction of implications thereof. The controversial feints included the many difficulties in realizing the productive design of landscape architecture due to the selective collecting of public opinion and the problems of settling the complications, the design limit of the turnkey and MA systems, the lack of hydraulic knowledge and technology and the shortage of vegetation monitoring data and experimental materials. The alternative proposals are as follows: 1) there should be agreement between the government organization and the civil group, 2) in the turnkey bidding for the river restoration projects, the river restoration design based on the volume divided into some parts should be reconsidered in order to maintain consistency in the total design, 3) in order to maintain consistency in the planning policies, MA designs should also be introduced and applied from the first stage of the project through its completion, and 4) data such as the safe water level in case of flooding for the facilities and the vegetation and data in connection with the ecological restoration of river should be accumulated. If these controversies are not settled effectively, the river restoration project will be delayed due to complications with the citizens and wasted time and effort will result from the frequent design changes. In addition, landscape architecture in this kind of restoration project is bound to decrease in the future due to frequent changes in the hydraulic-centered design.

내부연결방식 임플랜트 시스템의 삼차원 유한요소법적 연구

김유리,조혜원,이재봉,Kim Yu-Lee,Cho Hye-Won,Lee Jai-Bong 대한치과보철학회 2006 대한치과보철학회지 Vol.44 No.1

Statement of problem: Currently, there are some 20 different geometric variations in implant/abutment interface available. The geometry is important because it is one of the primary determinants of joint strength, joint stability, locational and rotational stability. Purpose: As the effects of the various implant-abutment connections and the prosthesis height variation on stress distribution are not yet examined this study is to focus on the different types of implant-abutment connection and the prosthesis height using three dimensional finite element analysis. Material and method. The models were constructed with ITI, 3i TG, Bicon, Frialit-2 fixtures and solid abutment, TG post, Bicon post, EstheticBase abutment respectively. And the super structures were constructed as mandibular second premolar shapes with 8.5 mm, 11 mm, 13.5 mm of crown height. In each model, 244 N of vertical load and 244 N of $30^{\circ}$ oblique load were placed on the central pit of an occlusal surface. von Mises stresses were recorded and compared in the crowns, abutments, fixtures. Results: 1. Under the oblique loading, von Mises stresses were larger in the crown, abutment, fixture compared to the vertical loading condition. 2. The stresses were increased proportionally to the crown height under oblique loading but showed little differences with three different crown heights under vertical loading. 3. In the crown, the highest stress areas were loading points under vertical loading, and the finish lines under oblique loading. 4. Under the oblique loading, the higher stresses were located in the fixture/abutment interface of the Bicon and Frialit-2 systems compared to the ITI and TG systems. Conclusions: The stress distribution patterns of each implant-abutment system had difference among them and adequate crown height/implant ratio was important to reduce the stresses around the implants.

Transitional implant를 이용한 임시수복과 최종 수복

김유리,민승기,Kim, Yu-Lee,Min, Seung-Ki 대한악안면성형재건외과학회 2005 Maxillofacial Plastic Reconstructive Surgery Vol.27 No.6

Transitional implants were developed to support provisional restorations and to allow for load-free osseointegration of conventional implants while a patient was provided with immediate esthetics and function and are usually placed simultaneously at the time of definitive implant placement. Transitional implants are placed in a non-submerged fashion in a single-stage surgery and are designed to be immediately loaded. They generally are made of commercially pure titanium or titanium alloy and are designed as 1-piece implants composed of root and crown replacement segments. Transitional implants can be used in a wide range of indications, such as basic use as temporary implant, to support and protect the primary implants during the healing phase, single crown in the edentulous anterior region of mandibular, anchorage for orthodontic treatment, support a surgical and radiographic template, and primary implant to extremely atrophied alveolar crests of the mandible and maxilla. This article describes the clinical use of transitional implants to support the provisional complete denture and single crown in the restricted edenturous central incisor region of mandible.

장기미집행 도시공원 및 녹지 보상재원 마련을 위한 지방채 발행과 보상우선지역 선정 - 서울특별시를 대상으로 -

김유리,Kim, Yu-Ri 한국조경학회 2017 韓國造景學會誌 Vol.45 No.3

이 연구에서는 장기미집행 도시공원 및 녹지 토지보상 재원마련을 위한 지방채 발행의 타당성을 검토하였고, 지방채를 발행하여 지가 상승이 높은 지역을 우선보상할 것을 제안하였다. 이를 위해 장기미집행 도시공원 및 녹지 32개소를 대상으로 상관분석과 부분최소제곱(Partial Least Square: PLS) 회귀분석을 실시함으로써 '7년간 개별공시지가 상승가'에 영향을 미치는 요인을 규명하였다. PLS 회귀분석의 투영시 변수 중요도 값은 '기준년도 개별공시지가(1.919)', '해당 자치구 누적상승률(1.176)' 순으로 높았다. 본 연구의 시사점은 다음과 같다. 지난 12년간 서울의 평균개별공시지가 누적상승률이 지방채 누적이자율보다 더 높다는 것은 지방채 발행으로 지급해야 하는 이자보다 개별공시지가가 더 많이 올랐다는 것을 의미한다. 더구나 실보상가는 개별공시지가의 3배 정도 되므로, 실제로는 지급이자액보다 훨씬 더 많은 지가 상승이 이루어졌을 것이다. 이는 지방채를 발행하여 지가상승이 높은 지역과 같은 보상우선대상지를 선매수하는 것이 예산집행에 있어서 경제성과 효율성을 높일 수 있음을 보여준다. 또한 예산집행의 경제적 효율성을 위하여, 지가 상승이 높을 것으로 예상되는 '개별공시지가가 높은 곳', '지가 상승이 높은 자치구에 속한 곳'을 우선보상 기준항목으로 선정하는 것이 필요함을 보여준다. 앞으로, 장기미집행 도시공원 및 녹지 토지보상을 위해서 지방채를 발행할 경우, 지방채 상환재원 마련방안에 대한 다양한 연구도 함께 진행되어야 할 것이다. This paper examines the validity of issuing municipal bonds for land compensation of long-term unexecuted urban parks and greenbelts. Then it suggests that municipal bonds should be issued for compensation priority areas with high rising prices. By conducting correlation analysis and PLS(Partial Least Squares) regression for 32 long-term unexecuted urban parks and greenbelts, the factors were identified that affected 'rising prices of IAPLP(Individually Announced Public Land Price) after seven years'. According to the analysis results, Variable Importance in the Projection in PLS regression was higher in 'IAPLP of base year(1.919)' and 'Accumulated rising Rates of average IAPLP in the borough(1.176).' The implications of this study are as follows. In Seoul, the accumulated rising rates of average IAPLP over the past 12 years is higher than the accumulated interest rates for seven years of urban planning facility bonds, which means that IAPLP have risen more than the interest payments due to the issuance of municipal bonds. In addition, since the actual compensation is three times that of IAPLP, it is judged that the land price is actually much higher than the interest payments. This shows that issuing municipal bonds and preferentially compensating for areas like high rising land prices can increase the economic efficiency of the budget execution. Also, for economic efficiency of budget execution, it is necessary to propose an 'area with high IAPLP' or 'a part in the borough with high rising rate of average IAPLP,' which is expected to have a high rising land price as criteria for compensation priority areas. In the future, when issuing municipal bonds to compensate long-term unexecuted urban parks and greenbelts, variousresearch on financing for municipal bonds repayment should be conducted.