http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
열통합 기법을 통한 이산화탄소 막 분리공정 에너지 해석
김성훈,김태영,김범석,조현준,여영구,Kim, Seong Hun,Kim, Tae Yong,Kim, Beom Seok,Cho, Hyun-Jun,Yeo, Yeong Koo 한국플랜트학회 2016 플랜트 저널 Vol.12 No.2
이산화탄소 분리공정에 있어서 분리막 공정은 소형, 모듈성, 설치의 용이성, 작동의 유연성, 낮은 설치 비용 및 낮은 에너지 소비량 등의 장점들로 인하여 주목 받고 있다. 본 연구에서는 실험데이터와의 비교를 통해 교차흐름, 병류흐름, 향류흐름 3가지 모델의 정확도를 알아보았다. 실험에서 이용된 이산화탄소 분리공정을 가장 잘 나타내어주는 모델을 토대로 전산모사를 통하여 2단 막 분리 구조에서의 운전조건을 규명하고 분리막의 투과도 및 선택도가 분리성능에 미치는 영향을 알아보았다. 나아가 수증기 sweep을 이용하는 2단 막 분리 구조에서 열교환망 합성기법을 적용하여 열교환기 도입에 따른 소요 전력의 변화와 운전비용 절감효과를 살펴보았다. The membrane separation processes have received attention due to advantages such as compactness, modularity, ease of installation, flexibility of operation, lower capital cost and lower energy consumption. In this study, we evaluated accuracy of cross-flow, co-current and counter-current models. With the most accurate model, we identified the operating conditions of the two-stage membrane separation and examined the effects of permeance and selectivity of the membrane by simulation. Futhermore, power requirements and operating cost savings due to the introduction of the heat exchanger were investigated by applying heat exchanger network synthesis technique in the two-stage membrane separation using vapor sweep.
김성훈,김경훈,도환수,박주석,김경자,심광보,Kim, Seong-Hoon,Kim, Kyung-Hun,Dow, Hwan-Soo,Park, Joo-Seok,Kim, Kyung-Ja,Shim, Kwang-Bo 한국결정성장학회 2016 韓國結晶成長學會誌 Vol.26 No.2
본 연구에서는 열간가압소결법으로 SiC를 소결하여 균열자기치유 특성을 분석하였다. SiC는 $Al_2O_3$와 $Y_2O_3$를 소결조제로 $1950^{\circ}C$, 50 MPa, 아르곤(Ar) 분위기에서 소결하였다. 소결된 시편을 $3{\times}4{\times}40mm$, 절단 및 가공하고, Vickers 경도기를 이용하여 49.6 N으로 예비균열을 생성하였다. $1200{\sim}1400^{\circ}C$, 1~10시간 산화분위기에서 열처리한 후 XRD, SEM, 3점 굽힘강도를 측정하였다. $1300^{\circ}C$ 1시간에서 741 MPa, 5시간에서 770 MPa로 가장 우수한 균열자기치유 효과를 나타내는 것으로 분석되었다. In this study, it was investigated that characteristic of crack-self-healing of hot-pressed SiC. SiC ceramics was sintered with $Al_2O_3$ and $Y_2O_3$ sintering additive by hot press. Sintering was performed in hot-press furnace in flowing argon (Ar), holding for 3 hr under $1950^{\circ}C$ and 50 MPa. The sintered SiC was machined into 3-point bending strength specimen of $3{\times}4{\times}40mm$, and introduced pre-crack by Vickers indentation at 49.6 N. Specimens were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), 3-point bending strength after heat treatment at $1200{\sim}1400^{\circ}C$ for 1~10 hr. The best crack-self-healing ability was achieved 770 MPa 3-point bending strength by heat treatment at $1300^{\circ}C$ for 5 hr.
공간구문론을 활용한 서울시 역세권 청년주택 대상지 용도상향 기준 계량화 방안
김성훈,송민호,전석훈,최내영,박민호,Kim, Seong-Hun,Song, Min-Ho,Jeon, Seok-Hoon,Choei, Nae-Young,Bak, Min-Ho 한국국토정보공사 공간정보연구원 2018 지적과 국토정보 Vol.48 No.1
역세권 2030청년주택은 청년주거문제가 조명되면서 서울시가 추진해 온 관련정책 가운데 가장 효과적으로 청년층을 위한 임대주택을 공급해 오고 있다. 그럼에도 불구하고 아직까지는 그 공급량이 서울시가 당초 계획했던 목표량에 크게 미치지 못하여 충분한 정책효과를 달성하기 어려운 것이 현실이다. 본고에서는 이러한 역세권 2030청년주택의 공급부진 문제 해소를 위한 하나의 유효한 방안으로서 용도지역 상향(업조닝) 가능여부 판정을 위한 용도지역 간 인접성 판단기준이 명료하게 제시될 필요가 있다고 보았다. 이러한 맥락에서 본 연구는 용도지역 간 인접성 판단의 준거가 되는 역세권 청년주택 운영지침 상의 인접성 판별 모식도와 함께, 인접성 판단이 이미 이루어진 청년주택사업결정 공고, 고시 사례들을 중심으로 공간구문론을 활용한 공간구조 분석을 수행해보았다. 공간구조도 검토결과, 축공간도는 구성이 불가능한 것으로 판명되어 볼록공간도를 활용하였고, 볼록공간도를 활용한 결과 모든 분석 사례에 있어 깊이(Depth)가 2 이하 일 때 두 공간은 서로 인접하게 되어 용도지역 상향을 위한 용도지역 간 인접성 조건을 충족함을 알 수 있었다. After the housing shortage problem for the youths has invoked substantial social attention recently, Seoul's 2030 Youth Housing Program has been timely improvised and successfully providing the decent rental housing packages for the deprived youths of the City. Its housing supply rate, nevertheless, did not sufficiently catch up with the actual need of the youth group so that the program goal is seen by many to be difficult to readily achieve. In an effort to counteract such adversities, it is seen, in this study, that the clarification of the criteria that judges adjacency condition for up-zoning when a candidate housing site is adjoining to a denser land-use classes could be one effective method to augment its supply rate. This study, in this context, has performed spatial structure analyses via space syntax method against: 1) the conceptual diagram in the City's official manual that renders the acceptable adjacency conditions, and; 2) numerous real-world 2030 Youth Housing cases enlisted in the City's public notices that permit their construction. The consequences are that the axial map is not applicable whereas the convex map is adequate for the purpose at hand, and, among all the cases, those spaces that are adjacent with its Depth of less than 2 are seen to successfully satisfy the official adjacency condition for the up-zoning.
김성훈,박재기,Kim, Seong-Hun,Park, Jae-Gi 한국섬유공학회 1997 한국섬유공학회지 Vol.34 No.3
Wet process with KOH aqueous solutions was performed for the surface treatment of polyimide films. Surface energy and mechanical property of surface treated commercial polyimide films in wet process were investigated. The value of surface energy in wet process was increased rapidly at the beginning of treatment time. However, the tensile strength of the surface modified polyimide films were decreased with increasing treatment time The lap shear strength measurement revealed that the value of lap shear strength was increased in the beginning of treatment time. However the value of lap shear strength was decreased as treatment time goes by. It seems that irregular adhesion on the surface modified polyimide films in the pressing due to the excessive etching on the surface of polyimide films. The phenomena were confirmed by SEM. The factors of improvement of polyimide adhesion were the applied pressure for the bonding process, drying time after surface modification and surface energy as the index of surface polarity (The lap shear strength decrement with increasing treatment time is induced by the irregular adhesion of the excessively etched polyimide surfaces)
김성훈,김중배,Kim Seong-Hun,Kim Jung-Bae 대한전자공학회 2006 전자공학회지 Vol.33 No.3
URC(Ubiquitous Robotic Companion) 환경에서 소프트웨어 로봇은 인공지능 기술과 네트워크 기술을 활용하여 상황에 따라 사용자에게 맞는 맞춤형 서비스를 제공하는 지능형 에이전트 기술로 정의할 수 있다. 소프트웨어 로봇은 인터넷 상에 존재하는 가상의 로봇이며, 실물 로봇을 제어하기 위해서는 로봇 내부에 로봇의 태스크와 행위, 하드웨어 디바이스를 제어하기 위한 아키텍처가 필요하다. 본 고에서는 소프트웨어 로봇이 실물 로봇을 제어하기 위해서 필요한 로봇 내부의 소프트웨어 아키텍처의 요구사항과 시스템을 소개한다.