http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Ultra Real-Time PCR을 활용한 Avian Influenza Virus Subtype의 조기진단법
김상태,김영균,김장수,Kim, Sang-Tae,Kim, Young-Kyoon,Kim, Jang-Su 한국미생물학회 2011 미생물학회지 Vol.47 No.1
조류 인플루엔자 바이러스(AIV) 아형을 ultra-time PCR법(UPCR)을 이용하여 초스피드로 진단할 수 있는 방법을 고안하였다. 표적 대상의 프라이머는 AIV H5N1 아형의 hemagglutinin(HA) 유전자 중 가장 상보성이 높은 133 bp의 부위를 선택하였고, 실험의 안전을 위하여 인공합성의 방법으로 제작하였다. 압타머와 결합한 molecular beacon 기반 Mini-Opticon Q-PCR 기기를 사용한 UPCR법으로, 총 UPCR 반응액의 양을 10 ${\mu}l$으로, UPCR과 용융온도 분석시간을 15분 이내로 매우 짧게 단축시켰다. 민감도 측정에서 최소의 주형인 5분자의 HA 유전자만으로 정확히 AIV의 특이적 133 bp를 합성하였다. UPCR로 디자인된 이 PCR은 AIV 아형의 진단에 적용될 수 있을 뿐 아니라, UPCR이 기반되는 진단을 이용하여 다른 병원체에도 널리 적용 될 수 있을 것으로 기대된다. This ultra real-time PCR (UPCR) based diagnosis system for avian influenza A virus (AIV) subtype was designed. The target primer in this study was derived from H5N1 subtype-specific 133 bp partial gene of hemagglutinin (HA), and was synthesized by using PCR-based gene synthesis on the ground of safety. UPCR was operated by Mini-Opticon Q-PCR Quantitative Thermal Cycler using aptamer-based molecular beacon, total 10 ${\mu}l$ of reaction mixture with extraordinarily short time in each steps in PCR. The detection including UPCR and analysis of melting temperature was totally operated within 15 min. The AIV-specific 133 bp PCR product was correctly amplified until 5 molecules of HA gene as minimum of templates. This kind of PCR was drafted as UPCR in this study and it could be used to detect not only AIV subtype, but also other pathogens using UPCR-based diagnosis.
김상태,변상규,Kim, S.T.,Byun, S.K. 한국전자통신연구원 2002 전자통신동향분석 Vol.17 No.6
이동통신 망을 이용한 데이터통신 서비스는 정보형인 무선인터넷 서비스와 통신형인 SMS 서비스로 구분하여 국내 무선인터넷 산업 동향을 파악하고, 해외 주요 국가들과 비교하였다. 우리나라와 일본은 통신형과 정보형 서비스가 균형을 이루며 고루 발전하고 있음을 확인하였으며, 서유럽 지역에서는 통신형 서비스 위주로 발전하고 있음을 알 수 있었다. 국내의 데이터통신 서비스는 매출액, 트래픽 면에서 아직 초기시장에 머물러 있으나, 무선인터넷 가입자 기반이 넓고, 높은 성장세를 보이고 있는 등 긍정적인 측면들도 발견할 수 있었다. 또한 WAP/ME 등 브라우저 방식의 가입자가 증가하고 있으며, CP 및 유료 사이트의 수가 증가하는 등 무선인터넷 서비스의 성장을 위한 기반은 잘 갖춰진 것으로 판단된다. 그러므로 가입자 중 실제 사용자의 비중을 늘리고, 이용자들이 좋아하는 콘텐츠를 확대하여 데이터통신의 매출액 비중을 선진 이동통신 국가들 수준으로 높이기 위한 노력이 요구되고 있다.
피로수명예측을 위한 잔류강도 저하모델의 파라미터 결정법 제안(II)
김상태,장성수,Kim, Sang-Tae,Jang, Seong-Su 대한기계학회 2001 大韓機械學會論文集A Vol.25 No.9
A new method of parameter determination in the fatigue residual strength degradation model is proposed. The new method and minimization technique is compared experimentally to account for the effect of tension-compression fatigue loading of spheroidal graphite cast iron and graphite/epoxy laminate. It is shown that the correlation between the experimental results and the theoretical prediction on the fatigue life and residual strength distribution using the proposed method is very reasonable. Therefore, the proposed method is more adjustable in the determination of the parameter than minimization technique for the prediction of the fatigue characteristics.
김상태,Kim, Sangtae 대한기계학회 2015 대한기계학회 논문집. Transactions of the KSME. C, 산업기술과 혁신 Vol.3 No.2
Disruptive innovation means the innovation which obsoletes the existing technology by a new technology. Like the examples of disruptive innovation, film camera and digital camera and PC and laptop, CAE technology can be regarded as a disruptive technology which can raise the disruptive innovation. CAE technology which is being improved dramatically with the development of the related technologies brings the innovation in the design and validation process in manufacturing industry. This innovation can change the rule of the market so that the researchers, companies and CAE enginnees should pay attention to it. Also not only the improvement of the technology but also the training and cultivation of the engineers who can utilize CAE technology are very important and cannot be neglected. 와해성 혁신은 기존의 기술을 진부화시키는 새로운 기술에 의한 혁신을 말한다. 필름 카메라와 디지털 카메라, PC 와 노트북과 같은 와해성 혁신의 사례와 같이 제조업에 있어서도 CAE 기술이 와해성 혁신을 야기할 수 있는 와해성 기술이라고 볼 수 있다. 관련 기술의 발전과 더불어 급격하게 발전하고 있는 CAE 기술은 제조업에 있어서 설계와 검증과 관련된 프로세스를 혁신을 가져오고 있다. 이러한 혁신은 관련 시장의 판도를 변화시킬 수 있으며 관련 분야의 연구자와 기업, CAE 종사자들은 이와 관련된 다양하고 구체적인 노력을 기울여야 한다. 특히 기술의 발전뿐만 아니라 CAE 를 활용할 수 있는 인력의 양성에 대한 노력도 소홀히 해서는 안된다.