http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김동구(Dong-Gu Kim),김원(Won Kim),이찬주(Chan-Joo Lee) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
본 논문은 현재 강우량 관측을 위해 활용중인 점우량계를 이용하여 소규모 구역에 대한 강우량 분포 실험을 수행하여 강우량 편차 분석을 수행하였다. 즉, 실제 수십 ㎢의 유역을 대표하는 점우량계가 좁은 구역에서도 우량계간 상당한 편차를 가지는 것을 관측 및 분석을 통해 보여주고자 함이다. 이런 편차는 유역에 떨어지는 강우의 유역 유출량 계산에 심각한 영향을 끼쳐 실제 홍수예보시스템의 정확도를 떨어뜨리고 있는 상황이다. 본 연구에 대한 관측 실험은 한국건설기술연구원 안동하천실험센터에 6기의 점우량계를 60m 간격으로 설치하여 수행하였다. 강우 분석을 위한 자료는 2014년 7월 11일부터 9월 3일까지 획득한 자료를 이용하였으며 분석 결과 일강우량을 기준으로 최대강우(85.5mm)시 최대 8.5mm의 편차를 기록하여 소규모 구역에서 약 10%의 강우 편차를 나타내고 있다.
졸-겔법에 의해 Tetraethoxysilane과 Methyltrimethoxysilane으로부터 발수코팅제 제조
김동구 ( Dong Gu Kim ),이병화 ( Byung Wha Lee ),송기창 ( Ki Chang Song ) 한국화학공학회 2018 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.56 No.3
출발물질로서 테트라에톡시실란(TEOS)과 메틸트리메톡시실란(MTMS)을 사용하여 졸-겔법에 의해 발수성 코팅용액을 제조하였다. 이 용액을 냉연강판 위에 스핀 코팅하고 열처리하여 비불소계 발수 코팅 도막을 제조 하였다. 이 과정 중 MTMS/TEOS의 몰 비, 물 농도 및 암모니아 농도가 코팅 도막의 발수성에 미치는 영향을 연구하였다. MTMS/TEOS의 몰 비를 1~20으로 변화시켜 제조 한 코팅 도막의 접촉각은 MTMS/TEOS 몰 비가 10 일 때 최대 수치인 108°를 나타내었다. 반면에 물의 첨가량을 증가시킴에 따라 코팅 도막의 접촉각이 증가하여 발수성이 향상되었다. 또한 암모니아의 첨가량이 커질수록 실리카 입자의 크기가 커져 실리카 입자의 표면 거칠기가 증가하므로 발수성이 증가하였다. Water-repellent coating solutions were prepared by sol-gel method using tetraethoxysilane (TEOS) and methyltrimethoxysilane (MTMS) as precursors. The solutions were spin-coated on a cold-rolled steel sheet and thermally cured to prepare a non-fluorine water-repellent coating films. The effects of molar ratios of MTMS/TEOS, water concentration and ammonia concentration on the hydrophobic properties of the coating films were studied. The contact angle of water on coating films prepared by varying the molar ratio of MTMS/TEOS to 1~20 showed a maximum value of 108° when the MTMS/TEOS molar ratio was 10. With increasing water content, the coating films showed the larger contact angles and the better the water repellency. As the amount of ammonia added was increased, the contact angles of coating films were increased, showing the better the water repellency. It is considered that the larger the amount of ammonia added, the larger the size of the silica particles generated, which increases the surface roughness of the silica particles, thereby increasing the water repellency.