http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
국정한(Kook, Jeong-Han),김기선(Kim Key-Sun) 한국산학기술학회 2011 한국산학기술학회논문지 Vol.12 No.11
본 연구는 상부에 설치되는 콘크리트 구조물 없이 설치되어 작동하는 새로운 소형 수문 시스템을 제안하였 다. 주요 메커니즘은 유압시스템, 수문 상하 이송 메커니즘, 수문 잠금 제어장치, 이물질이 감지되면 수문이 파손되 지 않도록 하는 안전장치 등으로 구성하였다. 유압 펌프 및 제어 시스템은 수문 시스템의 위치에서 떨어진 장소에 설치하여 상부 구조물을 제거할 수 있도록 하여 제어 하였다. 수문 인양 장치는 유압 액추에이터가 달린 래크와 피 니언이 측면에 설치되어 작동되며 그 결과 제품의 원가 절감, 작동시 안전성 확보 및 제품의 컴팩트화를 구현하였다. This study proposes the system of new small sluice gate operated without the upper concrete structure. The new mechanism is composed of hydraulic system, driving mechanism to feed the floodgate up and down, hydrological locking device, safety device and etc. The hydraulic pumps and control systems away from the location of the sluice gate systems are installed and controled in place. The feed device with the hydraulic rack, pinion and hydraulic actuator is installed on the side of the sluice gate. The following results take the advantages of cost reduction, operation safety and compact product.
냉각수 유속 변화에 따른 고주파 용접기용 가변 리엑터 / 커패시터의 변형에 관한 연구
국정한(Kook, Jeong-Han),박광진(Park, Gwang-Jin),김기선(Kim Key-Sun) 한국산학기술학회 2011 한국산학기술학회논문지 Vol.12 No.10
본 논문에서는 고주파 용접기의 가변 리엑터 및 커패시터를 해석하여 최적화 설계 하였다. 고주파 용접기의 극판 부분은 콘덴서의 역할을 하기 때문에 큰 정전 용량의 콘덴서를 만들기 위해서는 유전율이 큰 재료의 선택과 극 판의 면적을 크게 하고, 극판의 간격을 얇게 하여야 한다. 하지만 많은 전류가 흐르기 때문에 저항이 발생하여 열이 발생하게 된다. 이러한 극판의 열 변형을 막기 위하여 냉각수 등을 이용한 방법으로 극판의 열을 식힌다. 이때 극판 의 변형 및 온도에 따른 냉각수의 속도를 최적화 하였다. In this paper, variable reactor and capacitor for high-frequency welder are analyzed by optimum design. As the polar panel of high-frequency welder has the role of condenser, the material with the high rate of induced electricity has to be selected in order to manufacture the condenser with the great power cut. And the area of polar panel must be large and the gap between panels must be thin. On the contrary, the resistance is generated and the heat is happened because the large current is flown. To prevent the thermal deformation of this polar panel, the temperature can be lowered by using cooling water and so on. At this point, the speed of cooling water due to deformation and temperature of polar panel can be optimized.
국정표,이승철,전인기,김영표 ( Jeong Peo Kook,Seung Churl Lee,Inn Ki Chun,Young Pio Kim ) 대한피부과학회 1990 대한피부과학회지 Vol.28 No.5
A Case of Sporotrichosis Manifesting Unusual Location Jeong Peo Kook, M.D., Seung Churl Lee, M.D., Inn Ki Chun, M.D., Young Pio Kim, M.D. Department of Dermatology, Chonnam University Medical School, Kwangju, Korea Sporotrichosis is a fungal infection caused by Sporothrix schenckii and its cutaneous infections are very rare on the trunk. A 48-year-old male patient came to our clinic because of 1.3 ×0.7㎝ sized erythematous solitary nodule with crust on the right flank for 1 year. The biopsy specimen of the lesion showed characteristic arrangement of the infiltrate in three zone with H-E stain and round sopre with PAS stain. S. Schenckii was isolated by the culture of biopsy tissue pieces on Sabouroud`s dextrose agar media at room temperature, 35℃ and 37℃. The patient was treated with surgical excision of lesion and oral administration of itraconazole(200㎎/day) for 1 month. The patient was seen in consultation 1]weeks after therapy was discontinued, and he was in excellent condition. (Kor J Dermatol 28(5) : 606-610, 1990)