http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전민경,김두인,강신일,정명영,Jeon, Min Kyeong,Kim, Doo-In,Kang, Shinill,Jeong, Myung Yung 한국마이크로전자및패키징학회 2016 마이크로전자 및 패키징학회지 Vol.23 No.4
본 논문에서는 나노임프린트 리소그래피 기술을 이용하여 다양한 발수 표면을 제작하였으며, 발수기능의 안정성을 향상시키기 위해 액적의 충돌 거동에 대하여 평탄한 단위면적에 대한 구조물의 면적비인 표면 변수의 영향에 대한 연구를 수행하였다. 액적의 충돌 거동을 연구하기 위해 액적 충돌 시험을 통하여 충돌한 액적이 되튐에서 분산으로 천이 되는 임계높이를 측정하였다. 높은 표면 변수에서는 낮은 임계높이가 관찰되었으나, 낮은 표면변수에서는 임계높이가 증가하는 경향을 관찰하였다. 그러나, 표면변수가 더욱 감소할 경우 임계높이가 다시 감소하는 경향을 보였다. 관찰된 결과는 높은 임계높이를 위해서는 최적의 표면 형상 설계가 요구됨을 제시하고 있다. In this paper, the hydrophobic rough surfaces were prepared by employing a conventional nano-imprint lithography technique, and the effects of surface parameter, ratio of the top surface to the flat unit cell, on the impingement behaviors of liquid droplet were investigated to improve robustness of hydrophobic functionality. The critical height defined for the transition from rebound to fragmentation is measured by droplet impingement test in order to study dynamic behavior of an impinged droplet. It showed the critical height decreased with high surface parameter while it increased with low surface parameter. However, the critical height decreased again as surface parameter decreased further. Observed results suggest that the optimized surface pattern should be designed for the increased critical height.
기능성 마이크로 광 부품의 성형을 위한 UV 성형 공정 기술 개발
김석민(Seok-min Kim),강신일(Shinill Kang) 대한기계학회 2003 대한기계학회 춘추학술대회 Vol.2003 No.4
An experimental method is presented to maximize the replication quality of UV-molded micro-optical components. It is important to maximize the replication quality, because one can obtain the replicated micro-optical componenst with desired properties by accurate control of the shape. In the present study, a simple technique to avoid micro-air bubbles was first suggested. The effects of the UV-curing dose and the compression pressure on the replication quality of UV-molded structure were examined experimentally. Finally, as a practical application of the process design method, microlens arrays with diameters between 8 ㎛ and 96 ㎛ were fabricated by the present method, and the replication quality and the optical properties of the replicated microlens were measured and analyzed.