혈액 투석 환자에서 중심정맥 협착에 대한 스텐트 삽입술 : Wallstent Placement

임대승,노상필,이유선,정승현,김보영,이정우,강정아,김정희,이민수,정준용,최시완,정진옥,성인환,이강욱,신영태 충남대학교 의과대학 의학연구소 2002 충남의대잡지 Vol.29 No.1

Stenosis of central vein is a common complication arising after percutaneous subclavian vein catheter insertion performed for temporary vascular access in chronic renal failure patients undergoing hemodialysis. There are several treatment methods for the condition like percutaneous angioplasty(PTA), stent insertion, and surgery, but recent trend is toward PTA and stents. Among the patients diagnosed with chronic renal failure from March 1993 to May 2002 and undergoing hemodialysis through AV fistula, the 14 Patients in whom central vein stenosis arose were selected for the study. A total of 28 percutaneous interventions(5 PTA and 23 stent placement) were performed, and restenosis rate and the time taken till the restenosis in de novo lesions and instant lesions were compared. All 28 cases were operated successfully. The 14 cases that received both anigioplasty and stent placement initially. (de novo lesion : 14 cases), Among the 10 cases with de novo lesion that followed up more than 1 year, 3 cases are currently undergoing hemodialysis without restenosis, and the remaining 7 cases have recurred stenosis with the mean time to restenosis of 10.9 months. In the 7 cases in whom stenosis recurred, 11 interventions were done(instent lesion: 11 cases). 4 of these were using only ballon angioplasty with 100% restenosis rate and the mean time of 3 months until restenosis. The remaining 7 cases were using both balloon angioplasty and stent placement, also with 100% restenosis rate but with the mean time of 12 months until restenosis, which was later than the group receiving only balloon angioplasty. In treating the patients with central vein stenosis, stent placement seems to be more advantageous over PTA in terms of restenosis rate and the mean duration of patency. In the case of instent lesion, inserting the stent for the second time after stenosis recurred lengthened the duration of patency compared to performing balloon angioplasty alone.

Dimethylnitrosamine 유발 급성 간 손상 흰쥐에서 ^(99m)Tc-Lactosylated Serum Albumin을 이용한 간 기능의 평가

정신영,이재태,서명랑,유정아,배진호,안병철,황재석,정재민,하정희,이규보 대한핵의학회 2003 핵의학 분자영상 Vol.37 No.6

목적: ^(99m)Tc-lactosylated serum albumin (^(99m)Tc-LSA)은 간세포에 특이적으로 결합하는 간수용체 영상용 방사성의약품으로 새로이 합성되었다. 간섬유화를 유발하는 dimethylnitrosamine (DMN)을 투여한 간 손상 휜쥐 모델에서 ^(99m)Tc-LSa의 역동학적인 간섭취를 조사하고 간효소치의 변화와 조직학적 소견을 비교하여, LSA의 간섭취가 간기능의 변화를 반영하는지를 연구하였다. 대상 및 방법: SD계 흰쥐에 DMN를 27 mg/kg으로 복강 내 주사하여 급성 간손상을 유도하고 대조군과 비교하였다. DMN을 주사한 흰쥐를 3일(DMN-3), 8일(DMN-8), 21일(DMN-21)에 ^(99m)Tc=LSA (1,665 mg/kg) 29 MBq를 정맥 주사하여, 30분 동안 동적 영상을 획득하고 간과 신장부위에 관심영역을 설정하여 간과 심장부위의 시간방사능 곡선을 얻었다. 간기능 평가를 위해 시간방사능 곡선을 이용하여 간섭취지수와 혈중제거지수를 구하였고 곡선 최적화를 시행하였다. DMN 투여군과 대조군의 간효소치의 변화와 간조직의 광학현미경 소견을 비교하였다. 결과: 대조군에서는 ^(99m)Tc-LSA가 빠르게 간에 섭취되고 혈중에서 제거되었으나 DMN을 처리한 군에서는 간섭취가 낮았다. 간섭취지수의 비교에서 대조군에 비해 DMN 처리군에서 유의하게 간섭취지수가 낮았다(DMN-3: 0.842, DMN-8: 0.898, DMN-21: 0.91, 대조군: 0.96, p<0.05). 혈중제거지수의 비교에서도 대조군에 비해 DMN 처리군에서 혈중제거지수가 유의하게 높았다(DMN-3: 0.731, DMN-8: 0.654, DMN-21: 0.604, 대조군: 0.473, p<0.05). 비선형 회귀분석에서 R_(2) 값은 0.9이상으로 좋은 일치를 보였고, 대조군에ㅓ K값이 DMN처리군에 비해 크고(DMN-3: 0.28, DMN-8: 0.41, DMN-21: 0.46, 대조군: 0.97, p<0.05), T_(1/2)값은 작았다(DMN-3: 2.5, DMN-8: 1.7, DMN-21: 1.5, 대조군: 0.7, p<0.05). 간효소치의 변화는 DMN-3군에서는 대조군에 비해 상승하였으나 DMN-8, DMN-21군에서는 간효소치의 상승이 관찰되지 않았다. 간조직 소견의 경우 DMN-3군에서 중심정맥 주위에 괴사가 관찰되었으나 DMN-8군, DMN-21군에서는 미약한 정도의 염증세포 침윤만이 관찰되었다. 결론: ^(99m)Tc-LSA 간신티그래피의 간섭취 정도는 간손상과 반비례하였으며 간섭취의 변화는 조직학적 손상이 심한 정도와 간손상후 회복되는 과정을 반영하여 주었다. ^(99m)Tc-LSA 간신티그래피가 간손상을 평가하고 간손상후 회복되는 과정을 추적하는 간수용체 영상용 방사성 의약품으로 사용될 수 있을 것으로 생각된다. Objects: ^(99m)Tc-lactosylated human serum albumin(LSA) is a newly synthesized radiopharmaceutical that binds to asialoglycoprotein receptors, which are specifically presented on the hepatocyte membrane. Hepatic uptake and blood clearance of LSA were evaluated in rat with acute hepatic injury induced by dimethylnitrosamine(DMN) and results were compared with corresponding findings of liver enzyme profile and these of histologic changes. Materials and Methods: DMN (27 mg/kg) was injected intraperitoneally in Sprague-Dawley rat to induce acute hepatic injury. At 3(DMN-3), 8(DMN-8), and 21(DMN-21) days after injection of DMN, LSA injected intravenously, and dynamic images of the liver and heart were recorded for 30 minutes. Time-activity curves of the heart and liver were generated from regions of interest drawn over liver and heart area. Degree of hepatic uptake and blood clearance of LSA were evaluated with visual interpretation and semiquantitative analysis using parameters (receptor index : LHL3 and index of blood clearance : HH3), analysis of time-activity curve was also performed with curve fitting using Prism program. Results: Visual assessment of LSA images revealed decreased hepatic uptake in DMN treated rat, compared to control group. In semiquantitative analysis, LHL3 was significantly lower in DMN treated rat group than control rat group (DMN-3:0.842, DMN-8: 0.898, DMN-21: 0.91, Control: 0.96, p<0.05), whereas HH3 was significantly higher than control rat group (DMN-3: 0.731, DMN-8: 0.654, DMN-21: 0.604, Control: 0.473, p<0.05). AST and ALT were significantly higher in DMN-3 group than those of control group. Centrilobular necrosis and infiltration of inflammatory cells were most prominent in DMN-3 group, and were decreased over time. Conclusion: The degree of hepatic uptake of LSA was inversely correlated with liver transaminase and degree of histologic liver injury in rat with acute hepatic injury.

금 합금 보철물의 교합면 삭제로 인한 임플란트-골 계면으로의 열전달에 관한 연구

조재영,강선녀,정창모,윤미정,허중보,전영찬 대한치과보철학회 2012 대한치과보철학회지 Vol.50 No.1

연구 목적: 임플란트-골 계면에서 발생하는 과도한 열은 골유착을 저해하여 임플란트의 실패를 유발한다. 이에 이번 연구에서는 임플란트 금 합금 보철물의 교합면 삭제시 임플란트-골 계면으로의 열전달 양상과 냉각 방식의 효율성을 알아 보고자 하였다. 연구 재료 및 방법: 온도 감지 장치 제작을 위하여 Internal cone 연결형태의 임플란트에 16개의K형 열전대를 부착하여 아크릴릭 레진에 포매하였다. 치과용 금 합금과 주조용 abutment를 사용하여 교합면에 3개의 요철을 가지는 시편을 10개 제작하였고, 연결 나사를 이용하여 임플란트와 연결한 뒤 온도 감지 장치를 37℃로 유지되는 수조에 위치시켰다. 저속 핸드피스와 green stone bur를 이용하여 30초 동안 보철물의 요철을 삭제하였는데, 무냉각군, 공기 냉각 군, 물 분사 냉각 군으로 나누어 요철을 삭제하였다. 보철물이 삭제 되는 동안 임플란트의 부위별로 온도가 0.05초 간격으로 기록되었고, 삭제를 멈춘 뒤에도 무 냉각 군의 경우 임계 온도인 47℃ 이하로 온도가 하강할 때까지, 공기 냉각군과 물 분사 냉각군의 경우 삭제 중단 후 30초 동안 추가로 온도를 기록하였다. 냉각 방식에 따른 임플란트-골 계면의 온도를 알아보고, 임플란트의 부위별 온도변화의 유의차를 알아보기 위하여 one-way ANOVA를 실시하였고, Turkey HSD 이용하여 95% 유의수준에서 사후 검증하였다. 결과: 무 냉각 군은 임플란트-골 계면의 온도가 47℃ 이상으로 상승하였으며, 임플란트의 경부에서 유의하게 높은 열이 측정되었다(P>.05). 공기냉각군과 물분사 냉각군은 임플란트-골 계면의 온도가 47℃ 이하로 유지되었다. 무 냉각 군에서 임플란트 경부의 온도가 47℃에 도달되는 데는 약 10.8 ± 1.5초가 소요되었다. 공기 냉각 군과 물 분사 냉각 군 사이에서는 임플란트-골 계면 온도의 유의차가 없었다(P>.05) 결론: 이상의 결과로부터 임플란트 금 합금 보철물의 교합면 삭제 시, 임플란트 주위 조직에 위해를 가할 수 있는 임계 온도 이상의 열이 발생했음을 알 수 있었으며, 냉각방식은 공기 냉각과 물 분사 냉각 모두 효과적이라고 생각된다. PURPOSE. The purpose of this study was to analyze temperature change along the implant-bone interface induced by grinding the occlusal surface of implant gold prosthesis and to compare the temperature generated by grinding of prosthesis with different cooling methods. MATERIALS AND METHODS. The experimental gold prostheses were fabricated with dental gold alloy and castable abutment. The prostheses had 3 cylindrical protrusions on the occlusal surface with 1mm in height. Temperature was measured using 16 thermocouple wires attached to the implant fixture surface and the fixture was embedded in an acrylic resin block inside the 37℃ water bath. Cylinders were grinded for a period of 30 second with a low-speed handpiece with green stone point. One cylindrical protrusion was grinded without cooling, the second one was grinded with air blow, and the third one was grinded with water-spray. RESULTS. The mean maximum temperature was measured more than 47℃ of the implant and the maximum temperature was measured at the cervical portion of the implant in the group without cooling. There was statistically significant difference between the group without cooling and the groups with cooling (P<.05). However, there was no significant difference at all portion of implant in the groups with cooling (P>.05). CONCLUSION. The results of this study support that the grinding of implant gold prosthesis without cooling may damage the peri-implant tissue. The continuous use of air blow and water-spray adjacent to prosthesis during the grinding of implant gold prosthesis may prove to be beneficial for cooling of the implant.

Acriflavine-Guanosine 복합제 (AG60)의 조직내 분포에 대한 형광현미경적 연구

고정식,임수재,안의태,김진국,김상건,이경영,강종구,홍은경,정영신,유보림,한영복 대한해부학회 1999 Anatomy & Cell Biology Vol.32 No.1

알코올 금단 발작 환자에서 진전 섬망 예방에 대한 Nimodipine과 Chlordiazepoxide의 효과 비교

정두신,양광익,이보람,방차옥,이태경,성기범,안무영,박형국 순천향의학연구소 2001 Journal of Soonchunhyang Medical Science Vol.7 No.1

Background & objectives : An increase of calcium influx during alcohol withdrawal state may contribute to neuronal hyperexitability, which cause delirium tremens(DT). Some investigators have found calcium channel blockers effects in prevention of DT in experimental animals. Therefore we evaluated the preventive effects of calcium channel blocker(nimodipine) and benzodiazepine(chlordiazepoxide) on the development of DT in alcohol withdrawal seizure(AWS) patients. Method : A total 59 patients with AWS were divided into three groups according to the management nimodipine-treated, chlordiazepoxide-treated, and control(no specific medication) groups. We compared the incidence rates of DT in the three groups. Results : Total incidence rate of DT was 30.5%(18 of 59 patients). There were 6 DTs of 18 patients(33.5%) in nimodipine-treated group, 4 of 21 patients(22.5%) in chlordiazpoxide-treated group, and 8 of 20 patients(44.0%) in control. Conclusion : The control group(44.0%) showed the highest incidence rate of DT. And nimodipine-treated(33.5%) and chlordiazepoxide-treated group(22.5%) were followed. However, this result failed to demonstrated statistically significant differences due to small numbers size.

관상동맥 질환에서 SDF-1α의 농도

김보영,박용규,박형서,노상필,정승현,이유선,이정우,이재환,최시완,정진옥,성인환 충남대학교 의과대학 의학연구소 2003 충남의대잡지 Vol.30 No.1

Atherosclerosis is now viewed as an inflammatory disease of the vascular system. Expression of several chemokines, including monocyte chemoattractant protein(MCP)-1, MCP-4, RANTES(regulated on activation normal T-cell expressed and secreted), and interleukin-8(IL-8) are increased in human atherosclerotic plaques compared with normal vessels. They are involved in the pathogenesis of atherosclerosis and plaque rupture by activating and directing leukocytes into the atherosclerotic lesions. However, some are involved in homeostatic functions such as normal leukocyte traffic and growth regulation. SDF-la is a multi-functional cytokine that is involved in myelogenesis, hematopoiesis, angiogenesis and injured gastric mucosal regeneration in the gastric ulcer patient. SDF-la is recently shown to be highly expressed in atherosclerotic plaques and a potent platelet agonist. At least in high concentrations, SDF-la may mediate antiinflammatory and matrix stabilizing effects in unstable angina. Many studies are going on to know the function of SDF-la in coronary artery diseases. I investigated the difference of the plasma level of SDF-la between control group and coronary artery disease group. Total 75 subjects were enrolled. The diagnosis of coronary artery disease was confirmed in all patients by coronary angiography. Control subjects in this study were confirmed normal by coronary angiography. Clinical profile and risk factors were also reviewed. Control subjects in this study were 27 (M=10, F=17). Plasma for the study was collected before the angiography and centrifuged. SDF-la analysis was performed by ELISA. Plasma level of SDF-la is significantly increased in patients with stable angina(n=20) and unstable angina group(n=28) compared with healthy control group(n=27). the risk factors do not influence the plasma level of SDF-la in coronary artery diseases. In this study, plasma level of SDF-la is increased in patients with stable angina and unstable angina groups compared with healthy control group(P<0.05). the risk factors do not influence the plasma level of SDF-la in coronary artery diseases.

초등학교 고학년 학생의 장애아동에 대한 인식 조사

김보람,김호영,손유라,오진주,윤슬기,이효정,장문영 대한감각통합치료학회 2011 대한감각통합치료학회지 Vol.9 No.1

목적 : 초등학교 고학년 학생의 장애아동에 대한 인식을 알아보는 것이다. 연구방법 : 연구 대상은 김해시에 소재한 통합교육을 실시하지 않는 초등학교의 4, 5, 6학년의 비장애 아동이었다. 연구 기간은 2008년 10월 2일부터 10월 17일까지였으며, 설문지를 사용하였다. 설문지의 하위 영역은 사귐, 활 동, 학업 영역의 세 부분으로 각 10문항으로 이루어져 있으며 SPSS 12.0을 사용하여 분석하였다. 결과 : 장애아동에 대한 인식조사 결과 첫째, 성별에 따른 인식은 남학생보다 여학생의 평균 점수가 높았으나 통계 적으로 유의미한 차이는 없었다. 둘째, 학년에 따른 인식은 4학년의 평균 점수가 가장 높았고 6학년이 가장 낮았으 며 통계적으로 유의미한 차이가 있었다(F=3.546, p<0.05). 셋째, 장애인 접촉 유무에 따른 인식은 접촉 경험이 없 는 학생이 있는 학생보다 평균점수가 높았으나 통계적으로 유의미한 차이는 없었다. 결론 : 비장애학생의 장애아동에 대한 인식은 학년에 따라 차이가 있었다. 본 연구는 작업치료사들에게 장애아동에 대한 또래집단의 인식에 대한 정보를 제공함으로써 학교환경에 대한 이해를 도울 수 있을 것이다. Objective : The purpose of this study was to investigate attitude of grade-schoolers toward children with disabilities. Methods : The subjects of this study were grade-schoolers who have not received an inclusive education in Gim-hae. The study was surveyed from October second to 17th in 2008. The survey was categorized into three parts; comradeship, activity, and study. Each part of the survey consists of 10 questions. Data were analyzed by SPSS (version 12.0). Results : The results were as follows; First, the attitude of girls toward disabled students was non-significant compared to boys. Second, the order of attitude degree in grade of students was 4, 6, and 5. The attitude toward children with disabilities showed statistically significant difference according to grade(F=3.546, p<0.05). Third, the attitude of students who have experience of contact with people with disabilities was non-significant compared to non-experienced students. Conclusion : In conclusion, therefore peer groups in lower class levels showed more positive attitude toward the children with disabilities. The result will be useful information for understanding disabled children and making positive attitude. Also it is expected that occupational therapists help disabled children to participate in school life successfully using these information.

CT flouroscopy를 이용한 중재적 시술의 유용성

전혜정,박정희,서보경,박상우,신현준,최영철,한혜승,이창희 건국대학교 의과학연구소 2004 건국의과학학술지 Vol.14 No.-

Conventional CT-guided needle localization has been reported many times, but a few reports of interventional procedures by using multidetector CT scan with CT-fluoroscopy have been described. We presented 36 cases of CT-fluoroscopy guided interventional procedures focusing on the puncture technique. Two cases of small pneumothorax and one case of pulmonary hemorrhage out of 2lcases after lung biopsy, were not needed any treatments We can easily and accurately access to the lesion by using CT-fluoroscopy and unique our marker system.

2차원 가공정보의 DB구축을 통한 CAM시스템 개발에 관한 연구

손영지,박정보,김순경,전언찬 동아대학교 공과대학부설 생산기술연구소 1998 生産技術硏究所硏究論文集 Vol.3 No.2

NC code has to be made after changing the drawing information to DXF file, the convertig file. When the information is changed, the converted file is made decrease the unnecessary time of rapid feed during working and the DATA capacity after arranging the information ordered irregularly. This CAM program can be increased decreased uncomfortableness in contrast to use of each system based AutoCAD it can be increased productivity, example decrease of create time and product time about information, construct database of DXF code. And it can be used easely for the beginner of the minor enterprises. The connection of operations and the use of GUI increase business efficiency.

Continuous Wave of Condensation Technique으로 근관충전시 치근면 온도상승 분석

김영주,황윤찬,김선호,황인남,최보영,정영진,정우남,오원만 大韓齒科保存學會 2003 Restorative Dentistry & Endodontics Vol.28 No.4

This study was conducted to evaluate the temperature rise on the root surface while the root canal is being obturated using continuous wave of condensation technique. Maxillary central incisor was prepared for repeated canal obturation. Ten thermocouples (Omega Engineering Inc., Stanford, USA) were placed at 1mm increment from the anatomical root apex. The real temperature of Buchanan plugger was recorded before insertion into the root canal. The root canal was obturated with continuous wave of condensation technique as described by Buchanan and the root surface temperature was recorded during obturation at 150℃, 200℃, 250℃ and 300℃ temperature settings of System B HeatSource (Model 1005, Analytic technologies, Redmond, WA, USA). After completion of the temperature recording, the dentinal-cementum thickness at each sites was measured. The data were analyzed using one-way ANOVA followed by Scheffe's test and linear regression test. The results were as follows. 1. When the temperature was set at 150℃, 200℃, 250℃ and 300℃ on the digital display of System B HeatSource, the real temperature of the plugger at the 1mm point from the tip revealed 130.82±2.96℃ 158.00±5.26℃, 215.93±6.91℃ and 249.88±3.65℃ respectively. 2. The position of 8 mm from the anatomical apex showed the highest temperature increase at each temperature settings and it was significantly higher than those of other positions (p<0.01). The temperature rise was constantly increased toward coronal portion from apex of the root. 3. The maximum temperature increase on the root surface was 2.37±0.09℃ at 150℃ setting, 3.11±0.12℃ at 200℃ setting, 3.93±0.09℃ at 250℃ setting and 5.69±0.15℃ at 300℃ setting respectively. These results suggest that it be relatively kind to the supporting tissues of the root that the root canal is obturated using continuous wave of condensation technique at 150℃, 200℃, 250℃ and 300℃ temperature settings on digital temperature display of System B HeatSource.