http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이의호 대한기계설비건설협회 1994 기계설비 Vol.43 No.-
한국건설방식연구소(소장 이의호)가 지난해 12월5일 건설회관에서 제1회 국제방식기술세미나를 개최, 건설업계의 관심을 모았다. 이 세미나에서 $\ulcorner$아파트 물탱크 및 수도배관의 부식과 방식$\lrcorner$에 관한 주제발표를 한 이의호 소장은 국내 아파트의 급수관이 대부분 탄소강재나 철근 콘크리트재로 만들어져 부식이 급속히 진행되고 있으므로 이러한 부식현상을 예방하고 맑은 물을 마시기 위해서는 내식성이 우수한 스테인레스강이나 고분자 강력 합성수지로 교체해야 한다고 주장했다.
李義活(이의활),吳慧(오혜) 동아인문학회 2009 동아인문학 Vol.15 No.-
이 논문은 韓國 어느 대학 중문과 학생들의 2008년 2학기 中國語會話 과목에 대한 강의평가와 이 대학 中國語會話 과목을 수강하는 학생 가운데 중국 장기 어학연수를 다녀온 학생들의 중국어회화 과목에 대한 반응 및 중국어회화 과목을 수강하는 학생들과의 면담 등을 근거로, 韓國 大學의 中國語會話 과목의 교육환경을 분석한 것이다. 먼저 中國語會話 과목을 初級中國語會話, 中級中國語會話 및 高級中國語會話 3단계로 나누어 분석한 결과, 대부분의 학생들은 중국어회화 과목에 대하여서는 상당히 만족하고 있다고 하였다. 그러나 학생들의 중국어 수준의 차이에 따라 만족의 정도가 같지 않다는 것이다. 이런 관계로 중국어회화 과목을 담당하고 있는 교사는 학생들의 중국어회화 수준에 따라 만족도도 달라질 수 있다는 것을 명심하여야 하며, 아울러 대상과 수준에 맞는 교육방법을 채택하여야 할 것이다. 또한 조사 과정 가운데, 학생들은 스스로 이러한 문제들을 해결할 수 있는 방법을 제기하였다. 학생들은 한국에서의 외국어 습득 환경이 충분하지 못한 관계로, 먼저 인위적인 외국어 학습 환경 조성을 원하고 있었다. 그리고 어떤 경우 중국어회화 교재가 상당히 오래 전에 집필된 것이기 때문에 현실과 너무 멀리 떨어져, 학생들의 흥미를 유발할 수 없는 것도 있다고 하였다.
부산석회 Core로 충진된 연속식 칼럼을 이용한 인공폐수 내 인제거
이의상(Lee Eui-Sang) 한국산학기술학회 2006 한국산학기술학회논문지 Vol.7 No.4
본 연구는 폐기물로 발생되는 부산석회 Core를 연속식 칼럼에 적용하여 수중의 인산염을 효과적으로 제거할 수 있는 방안을 찾고자 수행되었다. 부산석회와 인산염의 칼럼 반응에서 Hydroxyapatite을 형성하여 수중의 인산염을 제거할 수 있는 것으로 나타났으며 부산석회 Core size 1, 2에서 유입수의 인산염 농도에 관계없이 초기 11시간동안 90% 이상의 높은 제거율을 보였다. 또한 부산석회 Core size와 관계없이 유입수 유량이 증가할수록 파과시간이 줄어드는 것을 알 수 있었다. The propose of this study was to investigate the feasibility of using waste lime core to remove phosphorus from wastewater in continuous flow reaction. The phosphorus was found to be removed from municipal wastewater by hydroxyapatite crystallization and precipation. Waste lime core size I, 2 showed phosphorus removal rate of about 90% during early II hrs of run time. In addition, breakpoint time was decreased by increased inflow rate regardless of waste lime core size.
알루미늄合金 A5083 熔接金屬의 固溶Mg量과 機械的性質에 관한 硏究
李義吉 大田工業專門大學 1983 論文集 Vol.33 No.-
5083 aluminum alloy plate of 50 mm thickness was welded by high current MIG process. Then, static tensile test was performed on base and weld metal at both room temperature and -196℃. Tensile strength in the weld metal tended to decrease when a parameter increased. The values of y=0 and 100% represent the fusion boundary and the center of the weld metal, respectively. Mg content dissolved in the weld metal which had been obtained by X-ray diffraction technique decreased when the parameter y increased. At the center of the metal, the dissolved Mg content near the specimen surface was less then that near the root of the weld metal. The change of the dissolved Mg content affected the tensile strength. That is, the tensile strength increased approximately linearly when the dissolved Mg content increased.
이의길 한밭대학교 2006 한밭대학교 논문집 Vol.23 No.-
The cast cylinder cover for S60MC engine type was evaluated with respect to the soundness of the product, compared with the MAN B&W quality specification. The assessment results were summarized, in terms of non-destructive evaluation, chemical and mechanical properties and metallographic analysis.