http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황희용,조정훈 강원대학교 정보통신연구소 2005 정보통신논문지 Vol.9 No.-
This paper presents a design of all band matched BPF, which has impedance matched characteristics in pass band as well as its stop band. The BPF is a kind of balanced structure which is made of two wideband quadrature 3 dB couplers and two band pass filters. The experimental results of a balanced type band pass filter show impedance matched characteristics not only within the pass band of about 80 MHz but also at the stop bands from 1.0 GHz to 3.0 GHz including upper and lower stop band. This BPF could give system designers a new and easier way to eliminate multiple reflection problems in RF systems.
황희용,최경 한국전기전자학회 2019 전기전자학회논문지 Vol.23 No.3
This paper presents the design method of a planar sleeve monopole antenna on PCB, which has wider bandwidthcompared to that of the conventional sleeve monopole antenna, by showing the fact that the sleeve of the conventionalantenna can be simplified in structure. The designed and fabricated planar sleeve monopole antenna`s structure is verysimple, with a monopole adjacent to a small square sleeve on FR4 PCB. The antenna shows 46% wider bandwidthcompared to the corresponding 3-dimensional one with nearly omni-directional radiation property. 본 논문에서는 기존의 3차원 구조의 슬리브모노폴 안테나(Sleeve monopole Antenna)를 모노폴과 접지면상의 작은 기생모노폴의 형태로 단순화하여도 비슷한 특성을 보이는 것을 확인하고 PCB상에 보다 광대역인 평면 슬리브모노폴 안테나의 설계 방법에 대해 다룬다. 설계 및 제작된 슬리브안테나는 평면형으로 메인 모노폴과 이에 근접하는 작은 사각형 슬리브로 구성되고 기존의 3차원 슬리브안테나와 비슷한 전방향(omni-directional)특성과 기존보다 46% 더 넓은 대역폭을 나타내었다.
황희용 한국전자파학회 2003 전자파기술 Vol.14 No.3
현재의 LTCC 필터는 주파수 대역이 서비스의 종류에 따라서 다르지만 대개 LDF, BPF, x-plexer 등 단품에서 Balun, Antenna, Coupler, RF-IC Chip, Matching 회로 등과의 복합부품화, 복합모듈화의 형태로 진행되고 있다. LTCC기술을 간단히 요약하고 LTCc 필터 설계의 주요 측면을 살펴본 후, 휴대단말기 분야 뿐 아니라 최근의 2.4GHz, 5.2GHz, 5.8GHz의 WLAN의 LTCC 필터, Waveguide형 LTCC 필터, Module화 등의 예를 보인다. 최신의 시장 예측기관의 조사 자료도 같이 살펴보고 향후 전망을 해본다.
LTCC 기술을 이용한 광대역 3㏈ 결합기 설계 및 제작
황희용,조정훈 강원대학교 정보통신연구소 2005 정보통신논문지 Vol.9 No.-
This paper presents a 3 dB wideband tandem quadrature coupler fabricated by LTCC technology. The 3 dB tandem coupler was designed with minimum numbers of layers and via holes to reduce the cost and to increase yield on manufacturing. Since tight coupling value is easily achievable with the tandem structure, any high impedance lines or tight coupling gaps can be avoided. The simulated and measured data shows wide bandwidth from 1.4 GHz to 2.4 GHz with 0.3 dB amplitude imbalance, phase difference within 1.5 degree, and the isolation characteristics about 20 dB. The size of fabricated 3dB coupler is 9.64×10.42×1.74㎣.