http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
디스퍼시브 리시안 다중경로 페이딩 채널에서 동기식 셀룰라 DS-CDMA, 네트워크의 역방향링크 성능
황승훈,Hwang Seung-Hoon,Hanzo Lajos 한국통신학회 2005 韓國通信學會論文誌 Vol.30 No.9a
본 논문에서는 리시안 다중경로 페이딩 환경에서 동기식 DS-CDMA 셀룰라 네트워크의 역방향링크 성능을 고찰하고자 한다. 시스템 성능은 단일 셀과 다중 셀의 두 가지 네트워크 레이아웃에서 성취 가능한 평균 비트오류율과 사용자 수용용량으로 계산된다. 특히 다중 셀 환경에서는 다른 셀 간섭이 동기식 DS-CDMA 업링크의 성취 가능한 수용용량에 미치는 영향을 살펴본다. 연구 결과를 보면 기존의 비동기식 CDMA 시스템과 비교할 때, 동기식 업링크 전송은 상응하는 비동기식 전송 시나리오보다 BER=$10^{-3}$에서 $25\%$부터 $56\%$까지 성취 가능한 사용자 수용용량 측면의 이득을 보인다. In this paper, the reverse-link performance of synchronous DS-CDMA cellular networks is investigated in Rician multipath fading environments. The system's performance is evaluated in terms of the achievable average bit error rate BER) and the user capacities of two different network layouts, namely those of a uniform grid of hexagonal multiple cells and a single isolated cell. In the multiple-cell scenario, the impact of the other cells' interference on the attainable capacity of the synchronous DS-CDMA uplink is investigated. Upon comparing both networks to a conventional asynchronous CDMA system, we demonstrate an achievable user capacity gain of $25\%$ to $56\%$ for synchronous uplink transmissions over that of the corresponding asynchronous transmission scenario at BER = $10^{-3}$.
불완전 전력 제어와 다중 경로 페이딩 채널에서 DS-CDMA 시스템을 위한 역방향링크 동기식 전송을 채용하는 병렬식 간섭 제거기의 성능
황승훈,김용석,이진구,Hwang Seung-Hoon,Kim Yong-Seok,Rhee Jin-Koo 대한전자공학회 2005 電子工學會論文誌-TC (Telecommunications) Vol.42 No.11
본 논문에서는 불완전 전력 제어 방식과 주파수 선택적 레일리 페이딩 채널에서 DS-CDMA 시스템을 위한 역방향링크 동기식 전송 방식(Reverse-Link Synchronous Transmission Technique: RLSTT)이 채용된 개선된 다단계 병렬식 간섭 제거기(Parallel Interference Cancellation: PIC)에 대한 성능을 분석한다. 로그 노말 분포의 랜덤 변수로 근사화되는 전력 제어 오차(Power Control Error: PCE)에 의한 성능 열화가 PCE의 표준 편차의 함수로 추정된다. 시스템 수용 용량을 추정하기 위하여 비부호화된 비트 오류 성능을 계산한다. 기존의 단일단계 간섭제거기 시스템과 비교하여 전력 제어 오차가 존재하는 경우에서도 RLSTT를 채용함으로 $60\%$ 정도의 이득을 얻을 수 있음을 보여준다. 즉 결론적으로 RLSTT는 수용용량을 더욱 개선해줄 수 있으며 PCE의 악영향을 감소시켜줄 수 있다. This paper analyzes the performance for an improved multistage parallel interference cancellation (PIC) technique with a reverse-link synchronous transmission technique (RLSTT) for DS-CDMA system in a frequency-selective Rayleigh fading channel with an imperfect power control scheme. The performance degradation due to power control error (PCE), which is approximated by a log-normally distributed random variable, is estimated as a function of the standard deviation of the PCE. The uncoded bit error performance is evaluated in order to estimate the system capacity. Comparing with the conventional one-stage PIC system, we show achievable gain around $60\%$ by the RLSTT even in the presence of PCE. We conclude that the capacity can be further improved via RLSTT, which alleviates the detrimental effects of the PCE
레일레이 페이딩 채널에서 유형 I 하이브리드 ARQ의 재전송시 전력 램핑를 채용하는 WCDMA 하향링크의 개선된 수율
김봉회,황승훈,홍유표,Kim, Bong-Hoe,Hwang, Seung-Hoon,Hong, Yu-Pyo 한국통신학회 2007 韓國通信學會論文誌 Vol.32 No.1A
In this paper, we propose and analyze a scheme for wireless channels, which is a combination of a type I hybrid-automatic repeat request (H-ARQ) scheme and a power ramping. The power ramping is considered for more reliable downlink data transmission, in which the transmission power is gradually changed from a small level to a large level when the number of retransmissions increases. The simulation results demonstrate that, when the power ramping step size is 0.5dB, the average throughput gain may be as high as 2% to 5% with properly selected parameters. 본 논문에서는 무선 채널에 사용되는 유형 I 하이브리드 자동재전송요구 (automatic repeat request: ARQ) 방식과 전력 램핑 (power ramping)가 결합된 기법을 제안하고 분석한다. 전력 램핑 기법은 더욱 신뢰성 높은 하향링크 데이터 전송을 위해 고려되었는데, 그 전송전력은 재전송의 수가 증가할 때 작은 수준으로부터 큰 수준으로 점진적으로 변화된다. 시뮬레이션 결과로부터 전력램핑 단위크기가 0.5dB일 때 평균 수율 이득은 적절하게 선택된 파라미터에 따라 2%에서 5% 정도 높아질 수 있다.
정밀유도무기 시험평가 수량 결정 및 명중률 검증 방법론
이문걸,황승훈,백승령,Lee, Moon-gul,Hwang, Seung-hoon,Baek, Seung-Ryoung 한국군사과학기술학회 2015 한국군사과학기술학회지 Vol.18 No.5
The current methods, such as Binomial Probability Distribution or T-test, to calculate the number of samples of Precise Guided Missiles(PGMs) for test and evaluation are statistically problematic to make reasonable decisions thus use the budget efficiently. Also, the method to verify an accuracy rate of the PGMs using these old methods seems to be lack of objectiveness. This paper presents an effective, efficient solution adapted from the clinical medicine testing method of healthcare industry research, which may overcome our problems. This method considers and addresses both manufacturers' and consumers' risk simultaneously. By taking into account the weapon system project characteristics which take a relatively longer time and require higher-level budget, this approach also suggests a reasonable and feasible method to determine the amount of samples of the PGMs and making a criterion to verify an accuracy rate of the missiles that are required to test. Thus, this method is expected to contribute to acquisition and operations of high-reliability PGMs by MND and its field-users.
Service Class-Aided Scheduling for LTE
팜헝,황승훈,Hung, Pham,Hwang, Seung-Hoon The Institute of Electronics and Information Engin 2011 電子工學會論文誌-TC (Telecommunications) Vol.40 No.1
LTE는 다양한 서비스 클래스를 가지고 QoS를 지원한다. 각각의 트래픽 클래스에 대해 BER 요구사항이 크게 다르다. 이는 다양한 클래스의 트래픽에 대해 전송 전력이 상이함을 의미한다. 본 논문에서는 우선순위와 목표 BER을 고려하여 서비스 클래스를 지원하는 새로운 LTE를 위한 스케줄러를 제안한다. CQI와 QCI에 의해 각 사용자당 크래픽 클래스에 대한 목표 BER로 부터 최소 전송 전력이 할당된다. 따라서 사용자의 과거 사용 전송율과 트래픽의 우선순위와 같은 다른 정보를 이용하여 점유 채널의 확률이 결정된다. 서비스 클래스 스케줄링의 시뮬레이션 결과는 최대전송율 및 비례균일과 비교될 것이다. 실험결과는 서비스 클래스 기반의 스케줄링이 전체 시스템 수율을 개선할 수 있음을 보여주고 있다. LTE (Long Term Evolution) supports QoS (Quality of Service) with several service classes. For each class of traffic, a big difference exists on BER (Bit Error Rate) requirement. This leads to a considerable difference in transmission power for various classes of traffic. In this paper, a novel scheduler is designed and proposed for LTE which supports CoS (Class of Service) with the consideration of priority as well as target BER. By the CQI (Channel Quality Indicator) and QCI (QoS Class Identifier), a minimum transmission power is assigned from the target BER for each class of traffic per each user. Hence, with the other information such as user's used rate in the past and the priority of traffic, the probability of occupying channels is determined. The simulation results of Service Class scheduling are compared with that of Maximum Rate and Proportional Fair. The results show that the service class-aided scheduling can improve the throughput of whole system significantly.