http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
위상 데이터 비트수를 최적화한 멀티미디어용 FM 음원합성 IC의 설계
홍현석,김이섭 한국통신학회 1996 韓國通信學會論文誌 Vol.21 No.11
With the advent of multimedia era, there are ever increasing interest in computer music and sound syntheis. An FM type sound synthesizing method makes possible the syntheis ofvarious sounds ofmusical instruments with a relatively simple hardware architecture. Therefore, in this paper, we designed a hardware architecture for real-time sound synthesizer and its logic gates. In this paper, we designed a basic sound generator for implementation of real-time logic gates, analzed characteristics of sounds synthesized in this architecture and extracted parameters of FM sounds of musical instruments by using the Csound software. The major bolkcs to build the hardware are a phase-generator, a singe-function-generator, an envelope-generator and a multiplier-part. Finally, logic circuits are designed and verified in VHDL and logic gates by 1.0um standard cell library, which will be easily implementable by the form of ASIC.
High-Speed BLDC Motor Design for Suction Fan and Impact on the Loss Caused by Core Welding
홍현석,김인근,이호준,고성철,이주 대한전기학회 2017 Journal of Electrical Engineering & Technology Vol.12 No.1
This paper deals with the effects of welding, which is done to fix the stator stack, on a motor in case of fabricating a prototype motor that is manufactured in a small quantity. In the case of a small motor, the stator is designed and fabricated with the segmented core as a way to raise the fill factor of winding wire to the utmost within a limited size. In case of fabrication by welding both inside and outside of the stator in order to fix the segmented-core stator, the effects of stack are ignored, and the eddy current loss occurs. This paper performed the no-load test on an IPM-type BLDC motor for driving the suction fan of a vacuum cleaner, which was manufactured by using a segmented-core stator. As a result of the test, it was found that input power more than expected was supplied. To analyze the effects of welding by using the finite element analysis method and verify them experimentally, a stator was re-manufactured by bonding, and input power supplied during the no-load test was compared.
홍현석,정우진,박종규,이상진,김영돈,한군희,천갑진 대한내과학회 2011 대한내과학회 추계학술대회 Vol.2011 No.1
서론: 대장내시경은 소장 말단부와 대장의 점막 병변을 진단하며 동시에 치료하는 시술이며, 현재는 건강검진 목적으로 그 수효가 점점 늘고 있다. 대장내시경의 흔한 합병증은 장천공, 출혈, 감염과 시술도중 사용되는 진정제에 의한 호홉억제 등이 보고 되고 있다. 하지만 대장내시경으로 인한 급성 담낭염은 매우 드문 합병증으로 외국에서 증례형식으로 보고 되고 있다. 정확한 기전은 밝혀지지 않았으나, 전 처치로 인한 탈수가 담즙을 농축시키고 이로 인한 답즙 배출의 감소와 담낭확장이 급성담낭염을 유발한다고 추정되고 있다. 저자는 대장내시경에 의한 급성담낭염이 발생한 증례 1예를 경험하였기에 보고하는 바이다. 증례: 43세 남자환자로 5년 전 위암으로 위전절제술을 시행 받았고, 추적관리와 건강검진 목적으로 복부전산화단층촬영과 대장내시경을 받았다. 전 처치로는 고 삼투압 설사제인 콜론라이트(R)(성분: 1포당 폴리에 칠렌글리콜3350 236 g, 탄산수소나트륨 6.72 g, 염화나트륨 5.84 g, 염화칼륨 2.96 g, 무수황산나트륨 22.8 g) 8포를 복용하였다. 복부전산화촬영에서는 위전절제술을 시행 받은 것 외에는 특이사항이 없었고, 대장내시경에서는 직장에 용종이 발견되어 용종 제거술을 시행 받고 다음 날 퇴원하였다. 퇴원 날 당일 저녁에 환자는 점점 심해지는 우상복부 통증으로 응급실로 내원하였고, 이학적 검사는 우상복부에 머피씨 징후가 관찰되었고, 혈액검사에서 백혈구 12,100/mm3로 증가되어 있었고 혈청 생화학 검사에서는 총빌리루빈 2.3 mg/dL, AST 998 IU/L, ALT 326 IU/L, γ-GTP 412 IU/L, ALP 599 IU/L로 각각 증가 소견 보였다. 응급으로 시행한 복부전산화단층촬영에서 급성 담낭염소견 보여 담낭절제술 시행 받고 증상 좋아져 합병증 없이 퇴원하였다. 결론: 본 증례는 국내에서는 첫 증례보고로 생각되며, 대장내시경을 시행받은 환자에서 우상복부 압통을 비롯한 발열이나 백혈구 증가증이 관찰될 때 급성 담낭염의 가능성을 언제나 염두에 두어야 하겠다.