http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
사용자 패턴을 감안한 리눅스 레이어 - 7 웹 클러스터 시스템의 구현
홍일구(Ilgu Hong),조재욱(Jaewook Jo),도인환(Inhwan Doh),노삼혁(Sam H. Noh) 한국정보과학회 2003 한국정보과학회 학술발표논문집 Vol.30 No.1C
폭발적인 웹 사용자의 증가를 수용하기 위해서 가격 대 성능비가 우수한 웹 클러스터링 시스템이 선호되고 있다. 많은 연구 결과들은 웹 요청의 패턴이 소수의 사용자 요청에서 매우 높은 확률과 빈도로 참조됨을 보여주고 있다. 이러한 참조 패턴을 반영하기 위해서 서버 시스템은 각각의 사용자 요청의 특성에 맞는 스케줄링 방법을 제공해야 한다. 본 논문에서는 TCP-handoff protocol을 이용한 Layer-7 기반의 클러스터링 시스템을 Linux에 구현하였고, 웹 사용자 요청 패턴에 기반을 둔 DS(Dual Scheduling) 부하 분산 알고리즘을 적용하여 기존의 부하 분산 알고리즘과 비교하였다. 실험적으로 DS 알고리즘은 기존의 알고리즘에 비해 35% 이상의 성능향상을 보여준다.
발사대시스템 연료공급설비 충전 유동해석 검증을 위한 나로호 해석 모델 및 비행시험 실측 결과 비교 분석
여인석(Inseok Yeo),홍일구(Ilgu Hong),안재철(Jaechul An),강선일(Sunil Kang) 한국추진공학회 2018 한국추진공학회 학술대회논문집 Vol.2018 No.5
한국항공우주연구원에서는 한국형발사체 개발에 앞서 시험발사체 발사를 수행할 예정이다. 이 발사체들의 발사를 위하여 각각의 발사체에 연료를 공급하기 위한 설비를 개발하기 위하여 1-D 해석 소프트웨어인 flowmaster로 해석을 수행하고 있다. Flowmaster 소프트웨어는 다른 분야에서 다양하게 사용되고 있지만 발사체 충전 유동해석에 대한 직접적인 검증을 통하여 더 높은 신뢰성을 얻을 수 있다. 따라서 발사를 위한 충전운용 때 측정된 데이터와 해석 결과 값을 비교/분석을 통한 검증을 수행하였다. 그 결과 최대 11.7% 이내의 오차율을 가졌으며 이 결과를 통하여 충분히 신뢰성을 확보했다고 할 수 있다. The Korea Aerospace Research Institute plans to launch a test launch vehicle(TLV) before developing a Korean space launch vehicle-II(KSLV-II). In order to develop a facility to supply fuel to each vehicle for the launch of these vehicles, the analysis is carried out with 1-D analysis software flowmaster. Flowmaster software is used extensively in other fields, but higher reliability can be achieved through direct verification of the vehicle charge flow analysis. Therefore, the comparison and analysis of the measured data and the analysis results at the charge operation for launching were performed. As a result, the error rate is within 11.7% and this result shows that the reliability is sufficiently secured.
한국형발사체(KSLV-II) 발사대 산화제공급계의 3단형 다단 발사체 충전을 위한 펌프 토출 압력 제어 운용 설계
서만수(Mansu Seo),홍일구(Ilgu Hong),강선일(Sunil Kang) 한국추진공학회 2020 한국추진공학회 학술대회논문집 Vol.2020 No.7
3단형 발사체인 한국형발사체 (KSLV-II) 발사 운용을 위해서, 발사대 산화제공급계는 다단 충전 운용을 수행해야 한다. 각 단별 충전 모드의 변화에 따라 공급 배관 후단 경계조건이 변하는 문제 해결을 위해 산화제공급펌프 토출 압력을 일정한 값으로 제어하는 로직을 적용하였다. 펌프 토출 압력은 토출부에 위치한 주 바이패스 밸브 개도와 연동하여 제어한다. 1단부 충전 모드 변경에 따른 급격한 압력변화를 완화하기 위해 보조 바이패스 제어 로직이 추가되었다. 목표 압력 대비 ±2% 이내의 범위에서 안정적으로 토출 압력이 제어됨을 유동해석을 통해 확인하였다. For the launch operation of the Korea Space Launch Vehicle-II (KSLV-II), which is a three-stage launch vehicle, the liquid oxygen filling system in ground launch complex must perform a multi-stage filling operation. The problem of changing the boundary condition at the end of the supply system according to the change in the filling mode for each stage is solved through logic to control discharge pressure of the oxidizer supply pump to a constant value. The discharge pressure is controlled in conjunction with the opening of the main bypass valve located at the pump outlet. An auxiliary bypass control logic is added to alleviate the sudden pressure change caused by the change of the first stage filling mode. It was confirmed through flow analysis that the discharge pressure was controlled stably within ±2% of the target pressure of the three multi-stage filling.